Guitar CampusOnline
бета

Бета-версия платформы

Портал развивается: мы запускаем разделы по одному, что-то ещё меняется, а часть функций скрыта до готовности. Дальше будет интереснее. Пока можно подписаться на наш канал в Telegram и следить за новостями.

Подписаться на @jazzguitarcampus
Сломать гитарные шеи. ДЛЯ НАУКИ · Смотреть на YouTube →
Субтитры:
—

Источник: StewMac (YouTube)

Инструменты, звук и мастера

Машинный перевод (local:quickmt-en-ru+g1). Оригинал

Материал на языке оригинала: English.

Сломать гитарные шеи. ДЛЯ НАУКИ

6 ноября 2026 г. · Источник: StewMac (YouTube)

Мы пожертвовали несколькими шеями, которые не прошли контроль качества, чтобы опробовать несколько клеев для ремонта головного убора на заказном магазине Томо Фудзиты SG Les Paul. Вот что я узнал... Больше впереди! — - — -- — - — У StewMac есть все, что вам нужно для ремонта, сборки или обслуживания ваших гитар. Все, что мы продаем, поддерживается нашим Lifetime Promise, и мы предлагаем быструю доставку по всему миру. Магазин StewMac: https://www.stewmac.com Instagram: @StewMac_Guitar Facebook: htts:// www.facebook.com/StewMac

Расшифровка видеоавто-субтитры · EN · RU

Нажмите на таймкод, чтобы перейти к моменту в видео

Оригинал (EN)
Перевод (RU)

Well, that was aggressive.

Well, that was aggressive. This is video number four in our series on headstock breaks using Tomo Fujita's custom shop SG Les Paul. I'd asked you folks in a previous video whether I should use tight bond or hide glue, and I got a lot of opinions. So, I ran some tests.

This is video number four in our series on headstock breaks using Tomo Fujita's

Here's what I did, and here's why I just broke that neck. I went down to our shop, and I found some necks that didn't pass QC, and we're heading for the scrap bin, and I cut the headstocks off of them. I did two for hot hide glue, two for tight bond,

custom shop SG Les Paul.

and a lot of people recommended fish glue, so I did two of those as well. I figured a band saw cut would make for a really weak joint, and maybe we'd learn something about the strength of all of these glues. So, I rubber banded them all shut and let them dry for 24 hours.

I'd asked you folks in a previous video whether I should use tight bond or hide

So, the one at the beginning of the video was fish glue, and that didn't hold at all. And honestly, I really wasn't going to use fish glue to begin with. Don't get me wrong, it has its place. I like fish glue, but not for something like this.

glue, and I got a lot of opinions.

Let's see if tight bond or hot hide glue did any better. Hide glue, here goes nothing. Original tight bond. Okay, so that wasn't the most scientific test in the world. All of them obviously broke through the glue joint, which I kind of expected.

So, I ran some tests.

What I'm seeing is that both on the fish glue and the hide glue, I can see an even kind of coating of glue on both ends of the break, which kind of tells me that it broke through the glue. Um what I'm seeing on the tight bond though is that all the glue is on the headstock

Here's what I did, and here's why I just broke that neck.

end right here, and I pulled fresh wood off of the neck. Maybe it held a little better. I pulled fibers of wood off of the neck. There's very little glue on this surface. It's all still right here and nice and hard and solid.

I went down to our shop, and I found some necks that didn't pass QC,

So, what we don't have time to go over is that I repeated this entire experiment, and the second time around, I flattened both surfaces after I came off of the band saw, so I got a much stronger glue joint. I was really hoping to learn something definitive from all of this,

and we're heading for the scrap bin,

and it just didn't happen. The second time, I pretty much saw exactly what I saw the first time. So, I know. I think it was worth doing and it was kind of fun to do, and it doesn't really matter because honestly,

and I cut the headstocks off of them.

I had already decided before the experiment that I was going to use Titebond. I love hot hide glue, but if something goes wrong in the clamping process and it gels up before I get it all closed back together, then I risk the integrity of the glue joint.

I did two for hot hide glue, two for tight bond,

I don't have that same problem with Titebond. What I do like about hide glue is that while it's hot, it's very liquid. It's easy to shoot through a needle, and I'm going to need to do that because the break on Tomo's neck is closed very

and a lot of people recommended fish glue,

tightly. I could water down Titebond to make it easier to shoot, but again, I risk the integrity of the joint if I do that. So, I have another idea for how I can get glue all the way inside of that crack,

so I did two of those as well.

and we're going to go over that in the next video when I finally get to work fixing this crack. We'll see you then.

I figured a band saw cut would make for a really weak joint,

—

and maybe we'd learn something about the strength of all of these glues.

—

So, I rubber banded them all shut and let them dry for 24 hours.

—

So, the one at the beginning of the video was fish glue,

—

and that didn't hold at all.

—

And honestly, I really wasn't going to use fish glue to begin with.

—

Don't get me wrong, it has its place.

—

I like fish glue, but not for something like this.

—

Let's see if tight bond or hot hide glue did any better.

—

Hide glue, here goes nothing.

—

Original tight bond.

—

Okay, so that wasn't the most scientific test in the world.

—

All of them obviously broke through the glue joint,

—

which I kind of expected.

—

What I'm seeing is that both on the fish glue and the hide glue,

—

I can see an even kind of coating of glue on both ends of the

—

break, which kind of tells me that it broke through the glue.

—

Um what I'm seeing on the tight bond though is that all the glue is on the headstock

—

end right here, and I pulled fresh wood off of the neck.

—

Maybe it held a little better.

—

I pulled fibers of wood off of the neck.

—

There's very little glue on this surface.

—

It's all still right here and nice and hard and solid.

—

So, what we don't have time to go over is that I repeated this entire experiment,

—

and the second time around, I flattened both surfaces after I came off of the band

—

saw, so I got a much stronger glue joint.

—

I was really hoping to learn something definitive from all of this,

—

and it just didn't happen.

—

The second time, I pretty much saw exactly what I saw the first time.

—

So, I know. I think it was worth doing and it was kind of fun to do,

—

and it doesn't really matter because honestly,

—

I had already decided before the experiment that I was going to use Titebond.

—

I love hot hide glue, but if something goes wrong in the clamping process and it

—

gels up before I get it all closed back together,

—

then I risk the integrity of the glue joint.

—

I don't have that same problem with Titebond.

—

What I do like about hide glue is that while it's hot,

—

it's very liquid.

—

It's easy to shoot through a needle,

—

and I'm going to need to do that because the break on Tomo's neck is closed very

—

tightly. I could water down Titebond to make it easier to shoot,

—

but again, I risk the integrity of the joint if I do that.

—

So, I have another idea for how I can get glue all the way inside of that crack,

—

and we're going to go over that in the next video when I finally get to work fixing

—

this crack. We'll see you then.

—

Машинный перевод (synapse:auto)Сообщить об ошибке перевода

Ещё по теме

Ее оригинальный состав на редкой стальной строчке 😍🎸Инструменты, звук и мастераЕе оригинальный состав на редкой стальной строчке 😍🎸🎸 Гитара в этом видео: https://www.siccasguitars.com/products/ennio-giovanetti-2012-acustic 😎� Siccas Luthiers — наша собственная гитарная линия, созданная и наконец проверенная в нашей мастерской Карлсруэ: htts:// www.siccasguitar.com/collections/sickas-luthiers 💬 Вопросы о a Гитара? Пишите нам на WhatsApp: https://wa.me/4915565916795? 🎁 € 50 приветственный ваучер, когда вы присоединяетесь к нашей еженедельной рассылке: htps://mailchi.mp/siccasguitars/siccas-guitras-newsletter ▶ Станьте членом Siccas Guitars от € 4.99 / monSiccasGuitars (YouTube)