
Will Mick Find Happiness In His Custom Built Guitar? [The Cutler Custom Story So Far...]
3 November 2026 · Source: That Pedal Show (YouTube)
Commission, build, play! But it's just a flippin' St**t mate! Isn't it? Welcome to the show. After years of saying I’d never order a custom-built guitar… I ordered a custom-built guitar! This video tells the story of how it came to be, with a couple of visits to the builder (Dean Cutler) along the way. Now, this is a long and slow video. It's Mick pace. Everything The Casual Viewer wants to know is in the first few minutes. After that, well, you need to be committed. Maybe literally. Once it’s f
Video transcriptauto-generated captions · EN · RU
Click a timecode to jump to that moment in the video
Hello and welcome to my corner of that pedal show Mick here.
Hello and welcome to my corner of that pedal show Mick here. This is a vlog about a guitar that I commissioned and acquired earlier this year. It is a Cutler custom guitars Panama classic custom. Just got to get all those words in the right order.
This is a vlog about a guitar that I commissioned and acquired earlier this year.
For those of you who just want to see and hear the guitar and don't want the backstory, that'll all happen in the first few minutes of this video. Uh so you can get what you came for. For anyone else who wants to hang around and hear the full in the weeds backstory,
It is a Cutler custom guitars Panama classic
we'll get into it in true TPS style. So what is it then? Well, there's a clear inspiration as you can see. Uh two-piece alder body roasted flamed maple neck and fingerboard, Monty's 61 mini humbuckers, a Wilkinson year one Stratocaster bridge и подключено
custom.
с master volume и two tones, или по крайней мере, так сейчас. Regular viewers will know that I'm a real traditionalist when it comes to guitars. Я сохранил фингерборд с радиусом 7 и четверть дюйма, это первый, который сделал Dean's, и также профиль грифа, вдохновленный винтажом.
Just got to get all those words in the right order.
Есть несколько отсылок к более поздним десятилетиям. Например, наличие string trees на головке грифа и использование staggered высота uh tuning pegs и также формирование области пятки, чтобы помочь с доступом, если я когда-нибудь отправлюсь к пыльному концу.
For those of you who just want to see and hear the guitar and don't want the
А кто может не заметить ту фантастическую оранжевую искру? Dean Cutler, которого вы встретите через минуту, он получил массу удовольствия, нанося это на него. Это настоящий металлический блестящий финиш в nitrocellulose lacquer. Это супер strat? Ну, я думаю, что да.
backstory, that'll all happen in the first few minutes of this video.
И uh, вот несколько звуков от это. [screaming] Да.
Uh so you can get what you came for.
Ладно, тогда cheerio тем, кто не хочет знать больше. Я не виню тебя. Для тех, кто хочет, давайте расскажем историю. Regular viewers of That Pedal Show will know that it's kind of out of character for me to play anything that is A, not true vintage spec by a heritage brand,
For anyone else who wants to hang around and hear the full in the weeds backstory,
that is to say Fender or Gibson in the most part, and B, to go to the hassle of commissioning a custom build guitar. To misquote Forrest Gump, having a guitar made is like a box of chocolates. Anyway, what happened was Dean Cutler,
we'll get into it in true TPS style.
for it is he who has made it, Cutler Custom Guitars, Dean came to an experience day back in 2022. Experience days are something we do every month at That Pedal Show where six people come in, spend the day with us. It's a great day.
So what is it then?
Dean came and with him brought a couple of guitars. Our first assumption were they were parts casters, you know, guitars put together from pre-existing parts. Nothing wrong with that at all. But it became apparent that Dean was actually machining the bodies and necks himself.
Well, there's a clear inspiration as you can see.
And they felt great and they looked great and to me anyway, that signaled pretty serious intent. It wasn't anywhere near full production. In fact, this was kind of hobby plus enthusiastic about guitar making, made a few guitars. I don't know if he'd sold any at that point.
Uh two-piece alder body roasted flamed maple neck and fingerboard,
Um and was kind of running it alongside his day job. So it wasn't a company as such. It was really kind of a passion project that was gaining momentum. In any case, what we really liked about the guitars, what I really liked about the guitars was their kind of old school vibe.
Monty's 61 mini humbuckers, a Wilkinson year one Stratocaster bridge and it's wired
You could see straight away they were nitro finished. The neck profiles felt like um you know, without wishing to offend anyone, proper real old school custom guitars. And if you've been lucky enough to play any of those early custom guitars from
with a master volume and two tones or at least it is now.
people like Wayne Charvel, Grover Jackson, that sort of classic era where the super strat came to be, they are quite different from the sort of modern identikit poly finished things that come out of Oh, I'm not going to say anymore,
Regular viewers will know that I'm a real traditionalist when it comes to guitars.
but um they really felt like proper custom guitars. And we played Dean's guitars during the day and a few other people played them, all had good fun. And as the experience day drew to a close, Dean offered to lend uh to leave one at TPS and we chose the guitar that became
So I've retained a 7 and a quarter inch radius fingerboard,
known as the blue meanie with a sort of respectful nod to Steve Vai's green meanie. It was um S-shaped double humbucker guitar that appeared on the show for a fair while after that when we needed a two humbucker um strat style guitar.
it's the first one that Dean's done,
Dean subsequently sold that guitar and so it went back to him. And when it went back to him, I think I dropped it back to him, and I said, "Would you build me a guitar?" Я постараюсь быть максимально осторожным в том, как это говорю,
and also a vintage inspired neck profile.
но это довольно серьёзное решение для почти неизвестного гитарного мастера, потому что, хотя мы с Дэном определённо не рок‑звёзды и не известны в более широком смысле этого термина, у нас всё же есть некоторое влияние, когда речь идёт о гитарах и усилителях,
There are a couple of nods to later decades.
и педалях. Итак, если ваш первый шаг в публичный форум, где ваши гитары видно через парня в YouTube‑шоу, который обожает vintage strats и 335s и подобное, вы тем самым открываете себя небольшому риску и я в первую очередь понимал это, когда просил Dean собрать гитару.
For example, the emission of string trees on the headstock and the use of staggered
Именно так, он совсем не волновался. Итак, мы решили не спешить и, эм, собрать что‑то вместе. Мы обсудили базовые характеристики гитары, как бы, знаете, корпус, гриф, все эти мелкие детали, с которыми Дин может справиться.
height uh tuning pegs and also this heel area shaping to help with
Конкретно, нужно было проделать большую работу над отделкой, о чём, эм, вы услышите через минуту. Эм, но настал момент, когда я сел в машину и поехал к Дину посмотреть прогресс впервые. Привет, друзья. Здесь прекрасный день, эм, где мы?
access should I ever venture up the dusty end.
Уилтшир. Я собираюсь поехать в Сомерсет, чтобы увидеть Dean Cutler. Надеюсь, во вводной части всё объяснено о том, что происходит. Но я довольно взволнован. Я не думаю, что у меня когда‑нибудь делали гитару.
And who can miss that fantastic orange sparkle?
Итак, эм, мы собираемся поехать в мастерскую Дина и посмотреть, как продвигается работа. Ладно. Врум, врум. Угадайте, где мы. Это Dean. Давайте, сразу перейдём к делу. Смотрите. Пока никто этого не видел, и это замечательно. Может, через минуту поговорим об этом подробнее.
Dean Cutler, who you'll meet in a minute,
Гриф пустой, обжаренный клен. Здесь есть кое‑что в процессе и проекты. Мне это нравится. Кровавый разбрызг. Это, это мой, эм, дань сериалу Dexter. Ладно. Эксперт по анализу кровавых брызг. И там сзади маленький кровавый slide slide, это, эм, его фирменные трофеи,
had all kinds of fun getting this on there.
которые он прячет в своем кондиционере. Так что я подумал, где спрятать кровь … slide? Сделать эту крошку было действительно сложно, правда? Да. Да. Because it was so many coats? Yeah. So, bottom line is once you've got your your color coat on,
It's a true metal flake sparkle finish in nitrocellulose lacquer.
so that's your TPS orange underneath, then you've got to spray you somehow you've got to suspend the the flakes into clear lacquer, and then get that to transfer and spray evenly onto the body. Which getting an even coat on that I have to use a completely different spray gun
Is it a super strat?
for it and one that you're not going to use for ordinary painting after it. You have to completely sanitize the spray room afterwards because that flake goes absolutely everywhere. Yeah, right. It's really tough. But then once you've got it there, [clears throat]
Well, I guess it is.
once you've got it on, you're happy where it is, you've then got almost like sandpaper. Yeah. There's it's such a Because of the flake. uneven textured textured surface, you've then got to bury that flake in more lacquer. Yeah.
And uh here are some sounds from
So, your clear coats are then got to be built up and it is contrary to what I try and do with all of my usual nitro guitars, which is keep as thin a layer of of paint and lacquer as possible. So, this was a little bit of how you know, I don't want to go too far. Yeah.
it.
Um the flake the flake necessarily means it's got to be more finish. Yeah, exactly. Three times the amount of clear coats. I'm I'm glad we chose a small grade flake. Cuz if it'd been any thicker flakes, then that would have been we'd still be doing it now, I think, probably.
[screaming]
I'm glad you're glad about something, But but it's so satisfying. Really, really satisfying. I'll do some um more de- I'll do some better shots of it with a better camera at some point, but what you will also see you might be able to see is that Dean's done
Yeah.
a very, very light We chose a really really light relic because it seems such a shame to heavy relic this given how much work's gone into it. So, a bit of lacquer checking um and maybe we'll go a tiny bit further, but not too far. Um yeah.
Okay, then cheerio to those of you who don't need to know any more.
And uh just to prove that we're in good company, look who's on his telly. [snorts] Hello, mate. If you ever watch this. Back to where we started. So, here's um Dean's headstock logo and you know, we want to wear this with pride. We're going to put this somewhere on it,
I don't blame you.
maybe not in this design, but um it uh needs some tweaking just to mark, you know, if you don't know what this acronym means, type it into Google now and it's a reminder that playing a guitar is all about playing music. And just to mark it,
For those of you who do, let's tell the story.
you know? So, we'll come up with a finished solution for that. And this is laser cut, right? Uh this this version is just um engraved on the CNC. Yeah. But that version and the version that'll be on your neck will be lasered because it
Regular viewers of That Pedal Show will know that it's kind of out of character for
just I mean that that that can get to a pretty good level of detail Yeah. and sharpness, but the laser just goes that extra Yeah, yeah. stage further and I'll be able to infill that with some uh some black lacquer to make it stand out.
me to play anything that is A,
So, yeah, well and and I it may end up on the back. Don't know. We'll see. We'll see. Decisions to be made. Cool. And um spectacular coffee. One decision we have to make today is pick guard material and uh Dean has very kindly picked out some groovy um sheets.
not true vintage spec by a heritage brand,
These are cellulose. Oh, are they? So, they're in you know, they're a bit obviously quite quite thick. Yeah. And we can get a nice rounded edge. I think they'll look really classy. Yeah, yeah. When you do see Just as a single ply and you don't make it any thinner,
that is to say Fender or Gibson in the most part,
it stays that thick? Yeah, stays that thick. Yeah, cool. That is quite thick. Um and of course there's a darker version. When you when I ordered them, you know you've no idea what they really going to look like, do you? But Oh, I like that one cuz it's or it's more orangey.
and B, to go to the hassle of commissioning a custom build
Yeah. Now, I mean that will play really nicely. That looks killer. I mean there are some other pick guards over here. So, if you look at the like uh that's a very nice aged Yeah, that's your classic. Classic. I mean it's going to have mini humbuckers,
guitar. To misquote Forrest Gump,
we'll get onto that in a minute, but I mean that looks pretty cool, but I want something I will have said all this in the intro, but I want something that is not that. Yeah. Something that is familiar enough, but different enough. I really love that slightly more red one.
having a guitar made is like a box of chocolates.
That looks killer. That it was that is just a a bit of cheap test stuff, so I was getting the positioning right and actually just adjusting the shape and things. Yeah. Um but it does give you an idea as well if you did just want to go down a plain black route.
Anyway, what happened was Dean Cutler,
Yeah, to me that's like very rock and it says a different thing. This is kind of like almost got like Cougar Koster vibe. Yeah. Which I which I really dig. Yeah, I I sought long and hard to find that stuff. Did you? And that's from day one I kind of had that in my mind.
for it is he who has made it, Cutler Custom Guitars,
Yeah, yeah. So, well as soon as you said tortoiseshell thing, I didn't want to put an ordinary tortoiseshell on it. I wanted something a little bit more unusual. I I think it for me that's an easy decision.
Dean came to an experience day back in 2022.
I love this. I love this cuz there's just enough orange in it for [snorts] it to for it to be right. Yeah. Yeah. And I actually you can see when you get it on the guitar, it brings out the darker black smoky side of it as well because you're layering up
Experience days are something we do every month at That Pedal Show where six people
your orange. So, I think that This is super nice. Super super cool. Okay, decision made. Related decision. Yeah. Do you want to cover on the back or not? No, thank you. Perfect. Yeah, we'll just that will we'll not do that.
come in, spend the day with us.
I don't Well, maybe we can talk about that another time, but no, not required. I generally don't put them on as a rule. I do. Yeah, it's not something I I always will put one in a in the case if if somebody wants to put one on, but Yeah. it's just again part of the vibe really.
It's a great day.
Yeah, yeah. I know I always whatever strap style guitar I have, they always come off incidentally. Yeah. Yeah. But cool. All right, we'll talk about the pickups and hardware in a minute. Right, Dean has asked me to bring a couple of things today. Pickups,
Dean came and with him brought a couple of guitars.
strings, and hardware, which we'll get on to a minute, but somewhat weirdly, Ainsley's on the telly. Uh I guess he's also playing the guitar. I've never actually seen this. Oh, somewhere there's another bloke on the stage that looks a lot like me. Who's that there?
Our first assumption were they were parts casters,
It's your younger, better looking brother, isn't it? Pickups, we've gone for Montys. And I was really desperate to try these. Matt's '61 mini humbuckers. Oh. Have you seen these before? No, no. Wow. I just I kind of wanted a HH strat, but not full size humbuckers.
you know, guitars put together from pre-existing parts.
Matt and George, the lovely people at Montys, and there we go. Wound for Michael Taylor. There you go. They didn't actually know that I ordered them online. They didn't know they were for me. So, I ordered it Michael Taylor. And that's what they've put there.
Nothing wrong with that at all.
They didn't realize they were for me. So, I did send Dean the measurements of these. There I am. I'm mightily relieved. Have we got the Have we got it right? Definitely. Now, I did actually cut that cavity a little bit bigger because one of the things Just in case.
But it became apparent that Dean was actually machining the bodies and necks
that I wanted Well, just in case, but also depending on if you just wanted it a little bit closer to the bridge Yeah. or whether you wanted it to come a little bit further forward. So, just a little bit of God, I haven't thought about that. adjustment there.
himself.
Um but the front one, that is pretty much fantastic. Woohoo. And you'll do a light aging job on those as well. Yeah, absolutely. We'll take the We'll take the outer lacquer off. Yeah. Little bit of aging and then sort of lightly polish them back up again.
And they felt great and they looked great and to me anyway,
We'll get a little bit of string wear marking on there. Um I went for nickel covers obviously cuz it's much easier on nickel than it is chrome presumably. Yeah. Yeah, it it it it prefers the the acid bath. Which is like ferrous oxide. Okay. That's what I use.
that signaled pretty serious intent.
Um But yeah, that'll Yeah. We should be able to make that quite subtle. Awesome. And hardware uh we've gone for um a a year or two back, Trev Wilkinson, who is a very old friend, um got in touch to say he had some hardware he wanted us to try.
It wasn't anywhere near full production.
It won't be that one, which is far more functionally useful. I'm mighty surprised you had that in there actually. Yeah, yeah. It will be this one. Yeah. Which is the year one bridge, which is Trev's most accurate recreation of a original strap bridge.
In fact, this was kind of hobby plus enthusiastic about guitar making,
Um which, you know, we'll talk about that elsewhere, but you presumably you've seen one of those before. Yeah, I've got one of those. Um I've been testing one in there, so the measurements and cavity etc. I know that is going to fit Yeah. just nicely.
made a few guitars.
Again, we'll do a little bit of little bit of aging. We'll just take the the the the outer lacquer off and just give it a little bit of Awesome. a little bit of fade. Don't touch it, but yes, nice, lovely. It's nice to have a weight to it.
I don't know if he'd sold any at that point.
Yeah, so um obviously all the bits in there. I don't know how many springs we'll end up with. We'll see. And uh yeah, as I say, much more functionally useful, but there's something about the aesthetic and the function of the old one that I,
Um and was kind of running it alongside his day job.
you know, 35 years of playing a guitar, can't change it now. И ваши тюнеры. Oh, bless you. Okay, so we got Gotoh staggered post. Yeah. Um Они разделились. Да. Я уже давно говорю, что просто обожаю их. И, эм, Дин предложил staggered post, чтобы получить угол наклона над порожком.
So it wasn't a company as such.
Да, получаем угол наклона, и на самом деле для меня, Я стараюсь по возможности избегать установки string tree. Просто с эстетической стороны это выводит меня из равновесия, у меня ОКР. Да, да, да. Счастливые дни, чувак. Счастливые дни. Счастливые дни.
It was really kind of a passion project that was gaining momentum.
У меня, эм, есть небольшая часть, готовая к bend от винтажных спецификации. Это довольно небольшая часть, но, но, вот и всё. Круто. Так что, на этом всё. На самом деле, ты не говорил о pots и cap значениях и прочем. Это будет интересный вопрос про эти pickups,
In any case, what we really liked about the guitars,
нужны ли им 500s или 250s. Я бы предположил 500s, потому что они, я думаю, довольно яркие mini humbuckers. Да, я считаю, 500s. Я думаю, ну, мы можем начать с 500s. То есть, мы можем спросить Мэтта, но я бы сказал начать с 500s. Да. Если они вам не понравятся, мы заменим их.
what I really liked about the guitars was their kind of old school vibe.
Да, да, я так думаю. О, поехали. Неплохо, неплохо, неплохо. Убирайся с моего телевизора. Я буду говорить громко, потому что AC/DC включены на телевизоре, и они, эм, подадут на нас за нарушение авторских прав, точно. Эм, струны.
You could see straight away they were nitro finished.
Итак, конечно, эм, Stringjoy strings, которые используют Дэн и я, это мои калибры, которые, эм, примерно посередине между 10‑м и 11‑м. и они отлично работают. Итак, Дин, конечно, будет работать с ними, эм, чтобы всё уладить. Круто. Забавно, сколько всего не приходит в голову.
The neck profiles felt like um you know,
Итак, одна из вещей, о которой я никогда по‑настоящему не задумывался, — расстояние от моста pickup должен быть удалён от моста при использовании mini humbucker. Мы просто приняли произвольное решение, исходя из того, где будет располагаться single coil, и
without wishing to offend anyone, proper real old school custom guitars.
где будет располагаться standard full-size humbucker. А потом, эм, что ещё мы решили? О, да, выбрать pick guard в зависимости от того, какую раскладку контролей я выберу. И мы решили, что я действительно отказываюсь от трёх, это будет больно.
And if you've been lucky enough to play any of those early custom guitars from
Поскольку у него два звукоснимателя, на самом деле нужны только два регулятора, правда? Громкость и тембр. Но я решил сделать, как у Gibson, и иметь отдельные регуляторы громкости для заднего звукоснимателя, а также общий регулятор тембра. То есть у нас будет три отверстия.
people like Wayne Charvel, Grover Jackson,
Громкость, громкость, тембр и трехпозиционный переключатель, чтобы не было слишком незнакомо и чтобы подчеркнуть последний момент в этом материале. Ах, это так круто. Итак, мы в мастерской, в гараже Дина, и ты только что объяснял мне что инвестировал в CNC‑станок.
that sort of classic era where the super strat came to be,
Да. Да, второй станок. То есть, предположительно, это режет корпуса, грифы, защиты для медиатора, или что угодно, что вам нужно. Абсолютно. Ну, вы видите, где я делал вашу защиту для медиатора. Можно увидеть, как он проходит сквозь материал.
they are quite different from the sort of modern identikit poly finished things
Эм, я покажу тесты по гравировке названия, логотипа и всего прочего. всё это будет там. Всё готово. И если у вас есть CNC, нужна правильная система вентиляции. И вам понадобится… Что это? Это строгальный станок, чтобы соединять ваши двухсекционные детали, ну…
that come out of Oh, I'm not going to say anymore,
может, когда‑нибудь и трёхсекционную. Но, эм, да, для двухсекционных корпусов вам нужна абсолютно ровная, идеальная поверхность. join in the middle. A leveler, is it? So this is a uh this is another planer but it's for thicknessing.
but um they really felt like proper custom guitars.
So basically to get to your 44.5 body thickness Yeah. before you go anywhere, before you even join the pieces together, you've got to bring that down to 44.5. This is massively accurate. Wow. Incredibly accurate. I do love machines. Significant [snorts] investment, isn't it?
And we played Dean's guitars during the day and a few other people played them,
And there's you know, it's a it's a small eye into the world of a small scale guitar builder because you know, the amount of effort you have to put in to get this stuff. Ну, гитары же надо делать, правда? Да. И не забудь про камеру для распыления, которая вот-вот будет...
all had good fun.
внутренний садовый сарай. Ему ещё предстоит много работы. Так что это была моя быстрая и небрежная выемка. Да. Эм, но мне нужно сделать, ну, шкаф, на самом деле. Чтобы я мог отфильтровать всю сторону. Мне нравится. гораздо более равномерный поток воздуха. О, чувак, я это обожаю.
And as the experience day drew to a close,
Фильтрация на входе с той стороны тоже. То есть у них нормальный поток воздуха. Честно говоря, я был сильно удивлён и доволен тем, насколько хорошо мне удалось Да. получить финиш с тем, что я сделал, но нужно, нужно постоянно совершенствоваться, правда? Двигайся вперёд.
Dean offered to lend uh to leave one at TPS and we chose the guitar that became
Это безумие. И, я думаю, это и есть суть вызова в создании гитар в целом в том, что, знаешь, Dean может сделать по-настоящему, по-настоящему, по-настоящему фантастическую гитару. Как только ты начинаешь пытаться делать, сколько бы сотен в год это ни было,
known as the blue meanie with a sort of respectful nod to Steve Vai's green meanie.
тогда нет никакой возможности сделать это в одиночку. Так что тебе приходится масштабироваться, и в этом вся проблема гитарных фабрик. Да. 100%. И, возможно, зайти на эту очень скользкую тему: CNC против ручной резьбы. Вау. Не используй станок. Но, э-э, но, если честно,
It was um S-shaped double humbucker guitar that appeared on the show for a fair
я бы сказал, что если ты используешь фрезер на любом этапе создания своей гитары, ты не делаешь ручную отделку. Ты CNC — это просто очень сложный фрезер. Да. Я имею в виду, для меня это очевидно. Я бывал в Taylor, я бывал в Martin, PRS.
while after that when we needed a two humbucker um strat style guitar.
И, знаешь, они единодушны в том, что если машина может сделать это лучше и за меньшее время, зачем же чёрт возьми делать это вручную? Да, да. Стабильность. На 100%. И для меня, в конечном счёте, ключ к CNC — это позволить делать кастомизацию очень быстро, легко и экономично. Да.
Dean subsequently sold that guitar and so it went back to him.
Профили грифа, о которых мы, очевидно, сейчас будем говорить, я могу предложить абсолютно любой профиль грифа. И для меня это почти не имеет значения в плане времени, усилий и стоимости, потому что как только я соберу библиотеку файлов на стороне проектных файлов CNC,
And when it went back to him, I think I dropped it back to him,
станка, я просто использую другой файл, понимаешь? И это даёт огромную гибкость. Невероятно. Невероятно. Невероятно. Мы начали говорить о грифах. Мы возьмём обожжённый клён, э-э, надеюсь, цельный гриф из обожжённого клёна. Это просто несколько заготовок, которые Dean сделал.
and I said, "Would you build me a guitar?"
Какая это порода дерева, Dean? На самом деле это, э-э, сапеле. Сапеле, да. Я хотел сказать, что это точно не клён. Э-э, просто чтобы посмотреть на профили и прочее. Одно из того, что мы делаем, — это посмотреть на старый Strat.
I'll be as careful as I can about how I say this,
Не для того, чтобы копировать, потому что я не хочу, чтобы он был точно таким же, но э-э просто снимаем некоторые замеры, чтобы посмотреть на одну из вещей, о которой я много раз говорил в влогах раньше, например, на то, как гриф становится толще по мере продвижения
but that's quite a big decision for a largely unknown guitar maker,
к 12-му ладу, на винтажных Strats это довольно заметно, особенно на этом. Я раньше измерял это в влогах, на случай, если вам интересно. И, ну, на более современных гитарах как-то менее обычно иметь такое увеличение глубины выше по грифу. Они обычно более плоские.
because while me and Dan are certainly not rock stars and well-known in any wider
Так что мы просто ориентируемся, как это выглядит. Ну, вы знаете, мы знаем, какая у нас nut width. Э-э, и т.д. и т.д. и профиль, просто чтобы посмотреть, ну, просто как ориентир. Не для того, чтобы копировать, потому что я не хочу, чтобы его копировали.
sense of the term, we do have some influence when it comes to guitars and amplifiers
Я не то что не хочу этого. Ну, у Dean есть гитара здесь, и в чём-то я предпочитаю форму этого грифа э-э, моему старому, но в старом есть что-то знакомое. Ну, может, в итоге получится какой-нибудь гибрид, но, э-э, да. То есть ты вносишь все замеры?
and pedals. So, if your first foray into a public forum of your guitars being
Я, я перевожу... Я, я измерял в миллиметрах, да, но все справочные таблицы в Они все в дюймах. Тебя удивило то, что ты только что увидел, или Э-э, меня удивляет, насколько он толстый на 12-м ладу. Да. Да. 24,21 против, э-э, 21 О, вау. Значит, это существенно. на этом.
seen is via some guy on a YouTube show who loves vintage strats
О, вау. Это существенно. Так, разница в 3 мил. Ну, вот и всё. Пару очень приятных часов потратили на гитары и всякое такое. Задали мне все вопросы, о которых я даже не думал. И мы, в общем, согласовали почти всё.
and 335s and things like that, you do open yourself up to a bit of risk there,
Осталось пара вещей, которые нужно доделать, прямо с того места, где начали. Что мы будем делать с этой лазерной гравировкой? Ну, мы решили, что наклейка будет transfer float, примерно похожая на эту. Мне нравится. И, ээ, мне нужно определиться с кнопками. Но это легко.
and I was chiefly aware of that when asking Dean to build the guitar.
Эм, это не влияет на следующий процесс сборки. Просто нужно это сделать. Продолжаем. Продолжаем. Продолжаем. Да, можем, да, можем за работу, и если последнее, что мы сделаем, — поставим разные кнопки, поставим какие-то, передумаем, и поставим другие.
Quite rightly, he wasn't worried at all.
Это, это, это ничего не задержит, так что всё отлично. Круто. Dean, спасибо тебе огромное за сегодня. Смотреть, как это всё происходит, всегда чертовски полезно. [snorts] И, эм, да, я сейчас в восторге, по полной. Отлично. Давай, дружище. До скорого. И вот мы уже поехали.
So, we decided to take our time and um put something together.
Это реально происходило. Не уверен, насколько я об этом задумывался в разговорах с Dean, потому что это было так давно, но, знаешь, стоит сказать, что вдохновение для этого я получил, и тут нужно кивнуть Michael Landau. Michael Landau, если вы не знаете, кто это,
We discussed the basic spec for the guitar,
ну, один из моих любимых гитаристов за всю историю. Его подход, его звук, всё, что Michael Landau делает на гитаре, это ну, в общем, он играл на куче гитар за эти годы, и за последние лет десять его чаще видели с гитарами типа strat от Johan Buca,
like, you know, the body, the neck,
ну, и пара модификаций от предыдущих лет. И, ну, нет сомнений, что, видя, как он играет на этом, также Ariel Posen, должен сказать, который играл на гитаре в стиле strat с двумя humbucker, ну, и конечно, все, кто на протяжении лет это делал
the kind of outlying things that Dean could get on with.
просто чтобы быть достаточно отличным от обычного страта с тремя single coil, который я так хорошо знаю. Так, да, огромный поклон Michael Landau. Но больше того, частью мотивации стало то, что после разговора с Joey Landreth, который мой очень хороший друг,
Specifically, there was significant work to do on the finish,
и Chris Buck, который мой хороший друг. Мне повезло в обоих случаях. Их выбор гитар, когда они начали набирать обороты в карьере, начал зависеть от того, что они не хотели быть связаны стереотипами привязанными к определённым гитарам. Для меня это звучит немного преувеличенно.
which uh you'll hear about in a minute.
Знаешь, я не артист. Я не выпускаю альбомы, не гастролирую и ничего такого. Но по моему опыту, когда я беру в руки strat, я начинаю играть в стиле strat. Что, знаешь, вполне нормально, если ты пытаешься быть как John Mayer или Jimi Hendrix или
Um but the time came uh when I got in the car and went over to see Dean and progress
чего угодно. Эм, и если я беру в руки 335, я играю на ней в определённом ключе. И то же самое с Les Pauls. Я очень люблю традиционные гитары. И это всё нормально. Разве не этого мы хотим, правда? Мы хотим звучать как наши герои, или хотя бы хотим подражать нашим героям.
for the first time.
Но то, что я заметил в последние годы, и, возможно, тебе это знакомо, где-то там, в глубине головы, ты начинаешь слышать, как ты сам выдвигаешься на передний план. И даже в нежном возрасте 52 лет, а мне сейчас как раз столько, я начинаю просто чуть больше этому доверять.
Hello, friends. It's a beautiful day here in uh where are we?
Иметь гитару, которая не, ну, абсолютно традиционной по спецификации, которой я так долго был одержим, действительно ставит тебя в определённый настрой. И тут я как будто слышу, как ты смеёшься и говоришь: «Ну, да, чувак, это же чёртов strat».
Wiltshire. I'm about to go to Somerset to see Dean Cutler.
Ну, в каком-то смысле и да, но это, ну, достаточно отличается. Для меня это достаточно отличается, учитывая, что я так привязан к этому three single coil инструменту, который мы знаем и любим, и я люблю его с тех пор, как мне было 10
Hopefully, everything is explained in the intro about what's going on.
лет. И, как обычно, пока я уношусь в своих мыслях обо всех этих вещах, а по дороге Дин на самом деле делал гитару. Да. Снимаем это по-настоящему. Привет, Дин. Доброе утро. Ну, раз я только что приехал, я ещё не видел гитару,
But I'm quite excited.
поэтому я подумал, что мы сделаем это как настоящую презентацию. Чтобы на самом деле зафиксировать, ну, зафиксировать реакцию. Конечно, я немного нервничаю, а как ты себя чувствуешь? Точно так же. Волнение, нервозность, предвкушение, и так далее, и так далее.
I don't think I've ever had a guitar made before.
Вот и всё. О, боже. Ну, сейчас я смотрю на это через объектив, так что перестану это делать и посмотрю на это своими глазами. Давай просто это настроим. Я знаю. Нам нужно зафиксировать всё, правда? Иначе к чему мы придем? О, братан, блеск реально блёстится. Ты уже мостик сделал?
So, um we're going to go to Dean's workshop and see how progress is coming along.
Да, да, да. Не может быть. Так, ты не... да, ты состарил крышки пикапов и мостик. Да. Состарил мостик, рычаг тремоло. Вообще-то, знаешь, я немного состарил кнопки, просто слегка скруглил их и такое. О, обо всём этом мы можем поговорить через минуту. О, чувак.
Right.
Посмотри на этот гриф. [snorts] Я расскажу про все характеристики, когда буду не так напрягаться, но ты ещё немного поцарапал лак. Да, точно. Вот эти микротрещины там, потому что у нас довольно глубокий глянец. Эм, он пока не очень звенит,
Vroom, vroom.
но это просто раскроется в ближайшие 6 месяцев, 12 месяцев, и так далее. Ну, тут немного, эм, конечно, я его немного поюзал. Да, да. Есть пара царапин и вмятин, но, ну, опять же, это, ну, обратная сторона того, что там на самом деле довольно красивое, э, глянцевое нитро-покрытие
Guess where we are.
там, что на самом деле это, это, это очень хорошее нитро, поэтому оно не любит, когда его... оно не особо хочет вмятинаться и давать сколы особенно хорошо. Оно довольно прочное. Эм [clears throat] ну Оно выглядит, оно выглядит просто убийственно вживую. Я видел фото, конечно.
This is Dean.
О, чувак, этот гриф просто безумно крут. Ладно, так, э, Дин и я просто выпили кофе и поболтали, но вытащить из кейса впервые и быстро поиграть, наверное, хочется сразу воткнуть э, сразу, и я, как бы, только что сказал Дину,
Come on, let we'll get straight to it.
я не хочу, я почти не хочу её воткнуть, потому что мне нравится, как она вибрирует и резонирует. Просто сразу скажу, Дин сделал setup, как я бы сказал, уверенно, то есть у неё есть немного relief в грифе и, э, относительно средний или высокий action, а мне это нравится.
Look. So, nobody's seen this yet,
То есть она не ощущается как очень, э, иногда, если зайти в гитарный магазин и поиграть на дорогой гитаре, мне она будет звучать ужасно. Они могут ощущаться как игрушки, потому что их просто настроили слишком легко и слишком slinky, что нравится многим. Мне это не нравится.
and it's remarkable.
И сразу ощущается, что это настоящая гитара, знаешь, как будто можно в неё ударить. Она просто очень манит. Сравни её с чем-то похожим на 6105 или AR 6105. Это, ну, просто car-версия. Разница, ну, как 0,5 мил. Чуть-чуть шире. Да. Так что они ощущаются фантастически.
Maybe we'll talk a bit more about that in a minute.
Края ладов очень приятные, правда? Это моя тема. Да. И, э, ещё непривычно — mini humbuckers, о них поговорим чуть позже, но прямо в руках это приятное сочетание привычного и нового.
Neck blanks, roasted maple.
И, как я уже сказал, без подключения она звучит так хорошо, что мне даже не хочется её подключать, но мы это сделаем дальше. И классно, верхняя струна не слетает с fretboard, как моя чёртова лямка слетает.
Got [snorts] some uh in progress and projects over here.
Так что я просто хотел записать это в момент, э, как первую реакцию, прежде чем мы прежде чем мы подключили её. Теперь первые звуки с подключением. Я уже немного поиграл, сел и просто немного пощупал, что тут происходит. Очевидно, для меня это незнакомая территория на S-type
I love this.
гитаре. Я попросил Dean сделать проводку в стиле 50-х, с отдельным volume для каждого pickup и master tone, и таким образом у нас получается neck pickup.
Blood spatter.
И в том, что мы только что играли, мне очень нравится, насколько гитара в строе. Я очень этим доволен. Bridge pickup, кажется, может немного микрофонить под gain. Мы только что немного поиграли с gain, что я дополню в студии. Но, эм, просто играю немного чистого звука.
This this is my um homage to the TV series Dexter.
Сейчас я включу немного delay. И, эм, мне нравится его интонация и резонанс это меня привлекает.
Okay.
Не знаю, насколько это будет слышно через микрофоны, которые мы здесь установили. Очевидно, я буду играть гораздо больше в студии, но первое ощущение — это знакомство. Звучание очень резонансное и весёлое, и оно просто
Blood spatter analyst expert.
играбельно. Всегда немного странно, когда берёшь гитару в первый раз из‑за очевидных причин. Нужно минуту, чтобы просто почувствовать себя уверенно и сделать первый удар, так сказать. О боже, какие ужасные манеры. Я не снял прощание с Дином, когда поднимал гитару.
And there's a little blood slide slide in the back,
Кажется, мой мозг просто взорвался. У нас был захватывающий разговор, и, эм, я попрощался с ним. Просто я не снял это. А дальше наступил обычный период адаптации, когда получаешь новую гитару. Ты одновременно и заинтригован ею, и немного испуган.
which is uh his trademark trophies,
Потому что ты не совсем уверен, что она будет делать и как всё будет. Эм, но довольно быстро стало ясно, эм, Хьюстон, у нас проблема. И реальная, полностью очевидная проблема была бы легко решаема, но это было немного более нюансировано, потому что я обнаружил, что при
which he hides in his air-conditioning unit.
низких, знаете, для большинства людей абсолютно обычных уровнях игры уровнях громкости гитара звучала фантастически. И даже при высоких громкостях на чистом звуке, она действительно имеет уникальный тембр, что мне кажется очень привлекательным.
So, I thought, where do I hide a
Однако при тех громкостях, на которых я играю, и при тех уровнях дисторшна, которые я использую, складывая разные вещи, эм, стало ясно, что возникает значительная микрофоническая обратная связь, неконтролируемая микрофоническая обратная связь.
blood [clears throat] slide?
Сейчас я хочу сказать, что я уже говорил, что скажу это много раз в этом видео. Это не вина звукоснимателя, что он слегка микрофоничен, правда? Ранние PAF-style humbuckers, и это то, что у меня здесь, просто мини‑версия этого.
Doing this flake was really tough,
Кстати, первые версии, как считают, датируются примерно 1961 годом, они не были восково‑герметизированы, верно? Так что они никогда не разрабатывались, эм, чтобы бороться с фидбэком, как более современные
right?
pickup'ы. И это действительно часть того раннего PAF звучания, когда они не восково герметизированы. Однако, как рок‑гитаристы обнаружили в 1970‑х, или, вероятно, ещё раньше, эм, для моего конкретного стиля игры,
Yeah.
нужно было что‑то изменить внутри этого pickup'а, чтобы он стал пригодным для меня. Во‑вторых, я хотел перепаять его. И опять, Я просил Dean провести гитару определённым способом. Эм, я думал, что будет логично разместить pickups на разных регуляторах громкости,
Yeah.
как это сделано в моём DGT, моём PRS DGT. И я должен был понять, потому что даже делая всё правильно, я не знаю. Много‑много‑много концертов, я бы сказал, сотни, но, вероятно, это было около ста концертов на этой гитаре. Эм, меня всё ещё полностью сбивает с толку эта раскладка.
Because it was so many coats?
Поэтому я решил перепаять её в типичном стиле Strat. Опять же, это не вина Dean. I asked him to do it as something different, but it just didn't work out for me. And as I said, it had become apparent I'd started using the guitar um to do bits and bobs of TPS filming.
Yeah.
And I'll cut in a bit here. This is before um we actually got going with the main show and I was just playing to warm up a little bit. And it was caught on camera and me and Dan have a conversation about it. So, this is this is real.
So, bottom line is once you've got your your color coat on,
It's right on the edge. It sounds great. Yeah, it does. Just need to sort that out. What what is it that because I think it sounds amazing. What what don't you like about it? Two things. One. That. Okay. It's just too And then that will go into microphonic feedback.
so that's your TPS orange underneath,
Gee, I'd I'd hate to lose that sound though. And Dan was right, you know, making a change to a guitar that sounds good is dangerous because you don't want to lose, you know, baby bathwater, all that kind of stuff.
then you've got to spray you somehow you've got to suspend the the
However, uh the following week I played it for the whole of the 10 Things We've Learned About reverb show. I'll cut a bit of that in as well. And what you can hear is when the gain pedal is on and there was quite a bit of gain, it was quite loud, the guitar is just ready to go.
flakes into clear lacquer, and then get that to transfer and spray evenly
It's just on the edge of that microphonic feedback. Out there in the real world and in there some days I play considerably louder than that and with considerably more gain. So, there's no choice.
onto the body.
I had to change it. Not entirely sure where we're picking the story up from, but let's pick up the story. So, it's Friday afternoon. Um I'm waiting for Royal Mail to turn up to collect the orders for the polo shirts. This is an unembroidered one, one of the ones with Anyway,
Which getting an even coat on that I have to use a completely different spray gun
it doesn't matter. Um I was going to go and do this at home. I've unusually been gifted some free time this weekend, so I was going to do it this home. No Royal Mail, so let's get on and investigate here. I think the general plan whip the scratch plate off,
for it and one that you're not going to use for ordinary painting after it.
have a look what's going on underneath. I just I want to make it absolutely clear all the way through this that it's absolutely no fault of Dean's at all that the guitar isn't that I'm going to change it, you know, I asked him to do this to begin with, [snorts]
You have to completely sanitize the spray room afterwards because that flake goes
but um it's not really to my liking, so or at least I can't get used to it. So, I'm going to change it. Problem number one, let's get it wired so that it makes sense to me. Issue number two, the microphonic bridge pickup.
absolutely everywhere.
Um again, I don't want to like say there's any fault with Monty's for making a microphonic pickup. [gasps] They don't wax pot them. I'll discuss that elsewhere, but it's too microphonic for me. I have fixed uh a Gibson one before by putting some sealant in between the
Yeah, right. It's really tough.
cover and the and the coils. Now, maybe I'll just do that. What I should do is call Matt and ask his advice, but I might just get on with it anyway, cuz that's the kind of mood I'm in. I should be out walking the dog and going for a beer, but no Royal Mail, so um hmm.
But then once you've got it there,
They call me laissez-faire. Might be a little bit of solder on the old finish there. Nice. Makes it mine, doesn't it?
[clears throat]
It's not a pedal show, is it, if I'm not laboring over some hilarious wiring job. Um but I'm just going to redo it from scratch just so I know where I am. I'll just start pulling everything off. Incredibly [snorts] annoying, Royal Mail haven't turned up,
once you've got it on, you're happy where it is,
so I am going to go home after all. Anyway, uh I'll get this all stripped off and um go from there. Okay, we've changed locations. It's a beautiful sunny day. I'm at home. I'm going to whip this pick up out,
you've then got almost like sandpaper.
have a look at it, take it apart, and see if there's anything that can be tightened up in there. Maybe put some sealant in there, just like I did with the PRS SE pickup, or at least the Gibson pickup that went into the PRS Silver Sky SE. Uh that's the nature of these pickups,
Yeah.
you know, they are not uh heavily wax potted as part of the tone, but maybe I do need it a bit. Tends not to be a problem in strats, anyway. Tele's you get it because of the way the pickup sits in the bridge. Um but yeah yeah anyway anyway anyway
There's it's such a
let's have this pickup out and have a look at it. Oh, look at that. Плоские винты. И снова, я просто хочу подчеркнуть, что это не считается дефектом. Эм, это заложено в конструкции звукоснимателя, и если вы хотите тихий звукосниматель, сделайте его восковой заливкой.
Because of the flake.
Но есть что-то в открытом и воздушном характере звука не залитых воском звукоснимателей [snorts] который, эм, ну, мне нравится. Эти два пайочных соединения здесь, нам просто нужно их освободить, вставьте лезвие бритвы между ними, и снимите крышку.
uneven textured textured surface, you've then got to bury that flake in more
И поскольку она не залита воском, эта крышка должна просто легко. Лезвие бритвы. Мне действительно стоит положить его в маленький тисковый зажим или что‑то в этом роде. Так что я отрежу свою окровавленную руку. Вот так. Вот она. Итак, теперь это должно выйти.
lacquer.
Вот, пожалуйста. Смог ли я не повредить его? Да, удалось. О, интересно. Посмотри на это. Как круто. Итак, магнит внутри. Он не слишком плотно сидит. Надо запомнить, в какую сторону его вставлять. Итак, синий... Видишь? Синий направлен назад.
Yeah.
Итак, если я сейчас вытащу этот магнит, очень аккуратно. Обычно ты должен... Да, видишь? Обычно здесь есть винты, которые держат весь pickup вместе. Но на самом деле, это вроде как ослабло. Итак, хм. Интересно, может, это и есть причина. Ладно. Давайте аккуратно откроем это.
So, your clear coats are then got to be built up and it is contrary to what I try
Вы видите, что происходит здесь. Ладно. Я ношу очки. Я ничего не вижу. Я всегда держу рядом кучу нелепых сверхмощных читающих очков, просто на случай. Минимизация любой вибрации внутри самого pickup — это то, что нужно происходит.
and do with all of my usual nitro guitars,
Итак, во-первых, насколько плотно он сидит в этом крышке? И есть небольшое движение в середине крышки. Да, так что будьте осторожны с этим. Я считаю, что небольшое давление на края крышки, а также на верхнюю часть крышки, что они делают в Monty's, — хорошая идея.
which is keep as thin
Во-вторых, у меня был некоторый успех с использованием силиконового герметика. Это было предложено компанией Throwback Pickups, где можно просто нанести силиконовый герметик вдоль катушки slug. То есть, у этого есть бар‑магнит, так что это? Это slug coil? [snorts]
a layer of of paint and lacquer as possible.
Не знаю. Я тут показываю свою некомпетентность в полном масштабе. Эм, и тогда это закрепит его к крышке, эм чуть более успешно. И хотя это звучит неидеально, Я делал это в Gibson humbucker, который установил в тот PRS, и это действительно
So, this was a little bit of how you know,
разницу. Поэтому, думаю, сделаю комбинацию из этих двух вещей. Эм, использую немного силиконового герметика. На самом деле слегка физически сжать крышку. Нужно очистить эти пайки, прежде чем я это сделаю, а потом собрать всё обратно pickup.
I don't want to go too far.
The one thing I don't know is if these I just googled if bobbins should be touching and in a in a normal humbucker they are because it ensures good fit in the case. But, what I might do there's it's spaced at this end. Hopefully, you can see that.
Yeah.
It's spaced at this end because there's a bit of wire in between. So, what I might do is equally space it at that end using a tiny spacer like a But, then I don't want to introduce anything that's going to interfere with the coils. So, even a cocktail stick is too wide.
Um the flake the flake necessarily means it's got to be more finish.
God. Here comes chopping fingers off time again. So many sharp things. So many guitar players' fingers. Where's the pickup There it is. There you are.
Yeah, exactly.
What I might do is put a blob of silicone on that. It'll stop that from moving. Right. Just going to squash that a bit. [snorts] [sighs and gasps] So it's a really tight fit.
Three times the amount of clear coats.
I guess here goes nothing then. Got my spacer installed. Going to It's It's just touching the tape, and I'm going to put some some silicone in, reseal it, and clamp it, and see what happens. Uh Yeah, I know.
I'm I'm glad we chose a small grade flake.
Here goes nothing. I mean, this could easily be one of the worst ideas I've ever had. But there we are.
Cuz if it'd been any thicker flakes,
Yeah, I don't know. I'm kind of I'm I'm in two minds about what to do now. So I think what we'll do I've been careful to clamp from the top and the bottom so the sides aren't affected at all, but I don't know whether I should actually try and clamp the sides, but [snorts]
then that would have been we'd still be doing it now,
um on there, being careful not to solder it to the clamp. Okay, so while that's clamping, um I can get on and wire the guitar. Sorry about these glasses, they just help me see. They're Catherine's reading glasses. Sounds a bit bad. Why would you buy a guitar and rewire it?
I think, probably.
Well, because I I want to say this, I keep saying it all the way through and I want to keep saying it. It's of no fault of Dean and Matt that I want to change things. It's just I want to change them. I went for something experimental and it hasn't really worked for me.
I'm glad you're glad about something,
So, I'm just going to rewire it. Now, there I've got an ulterior motive. Look what Matt gave me. That, my dear friends, is a Bourns blue pot, which has an interesting story, developed um in conjunction with Schecter, to get the highest quality guitar pot possible.
But but it's so satisfying.
Now, I'm always going through volume pots, particularly on my Les Paul, where I just they just crap out like within months. So, I'm forever replacing the volume pot on my Lester, particularly. And of course, if it goes in the 335, it's a pain, a royal pain to change.
Really, really satisfying.
So, I'm going to use this as a test case and use the Bourns in this guitar to see if it's any more robust. It's 500k. Uh it's an audio taper. The lugs are a bit weird cuz they're in um well, they just look a bit different, but they are actually in the same places a normal
I'll do some um more de- I'll do some better shots of it with a better camera at
pot. So, um let's proceed with that. Anyway, Bourns pots, if Dumble made pots, he would have made Bourns pots. Right, I'm definitely not filming all of this cuz it'll take me a while as it always does. Um Uh I got a diagram off Lindy Fralin's website um for two humbuckers,
some point, but what you will also see you might be able to see is that Dean's done
master volume, and separate tone for each pickup. So, it's kind of like a strat. So, So go, a Lindy Fralin diagram. Just available from their website. I'll just put it on screen. Lugs one, two, and three, so I don't get it wrong. Anyway, I'll start.
a very, very light We chose a really really light relic because it seems such a
And then uh I'll come back when when it's finished. Obviously, I can't wire the bridge pickup in, but I Fine, I can do that at the end. I can get everything else prepared. And um off we go. Okay. I'll see you later. It's the next day then. I've got the bridge pickup in.
shame to heavy relic this given how much work's gone into it.
This whole business here was really tough. I don't know if that's going to focus. Um just because of the positioning of the lugs on that Bourns pot. Um that little bit of un- shrunk shrink wrap there is there just to [sighs] stop anything shorting on the other lugs.
So, a bit of lacquer checking um and maybe we'll go a tiny bit further,
It's not pretty. God, it's not pretty. It's really hard. I suppose I could have run the other ground wires off these other pots, but anyway, whatever. [snorts] Um because in theory this should be doing the the ground connection everywhere else.
but not too far.
Marshall MS2, signed by Jim Marshall. How cool is that? Welcome to that heart-in-mouth moment. Um the sickening sinking feeling of spending ages wiring a guitar to see if it works or not. Please work. Amazing.
Um yeah.
Looks like something's not quite right with the uh middle position, but the bridge and the neck pickups positions work great. So I just need to have that off, have a look at the switch, and see if I can learn anything. Great, I've discovered it.
And uh just to prove that we're in good company,
On the switch here, I misunderstood the diagram because Oh, sorry, it's not in focus. These two middle lugs have got to be connected for the middle middle position to работает. Я только что проверил, и это работает. Средняя позиция. Позиция на грифе. Позиция у моста.
look who's on his telly.
Я думаю, у нас всё получается. Tone control работает. Регулятор громкости работает. Все работает. Ура. Сначала скучные вещи, а потом я просто настрою оборудование. Мы услышим эту гитару через минуту. Эм, я только что настроил её так, как обычно это.
[snorts]
То есть, пока ничего не менял в настройках этой гитары. И у меня есть три простых вопроса для начала. Первый: работает ли моя проводка? Второй: эм, изменил ли мой pickup вмешательство, сделав его звучание тусклым? Что вполне возможно.
Hello, mate. If you ever watch this.
И третий: исправило ли вмешательство в pickup проблему с фидбэком? Об этом, думаю, узнаем. Итак, эм, я просто проверю, что всё готово. настройка. Это хороший знак. Я буквально только что вынул его из гиг‑сумки. Сегодня я ещё не делал ни калибровки, ни преднастройки.
Back to where we started.
Итак, мы буквально проверяем, работает ли он впервые раз. Пожалуйста, мамочка. Пожалуйста.
So, here's um Dean's headstock logo and you know,
Немного расстроен. Регулятор громкости работает. Как вы увидите по DB‑метру, сегодня здесь очень громко. Он будет показывать чуть выше нормы, потому что я поставил его ближе к усилители.
we want to wear this with pride.
Давайте включим немного overdrive и посмотрим, что произойдёт.
We're going to put this somewhere on it,
Эм, извините за ужасный шум. Ладно, работает ли проводка? Да. Эм, звучит ли pickup заметно тусклее? Не заметил. И решена ли микрофония или, по крайней мере, резонанс, вызывающий microphonic feedback, решена? Да. А потом, когда я переключил на neck pickup,
maybe not in this design, but um it uh needs some tweaking just to
вы слышали, что это сразу превратилось в неконтролируемый microphonic feedback. Эм, опять же, более прозаично, прежде чем я начну что‑то делать музыкально, как он звучит в сравнении с моими двумя любимыми гитарами? Эм, потому что идея, в общем, я не знаю, в чём идея.
mark, you know, if you don't know what this acronym means,
Как он звучит рядом с моими двумя другими гитарами? Эм, давайте возьмём Strat. Теперь, очевидно, я ожидаю, что Strat сделает здесь это, знаете, классную вещь от Strat, которую мы ожидаем, окей?
type it into Google now and it's a reminder that playing a guitar is all about
я не ожидаю, что Cutler сделает это.
playing music. And just to mark it,
Как и ожидалось, моя другая любимая гитара. Это немного странно в среднем положении, потому что один из звукоснимателей находится в противофазе. Итак, будем оставаться на бридже позиции.
you know? So, we'll come up with a finished solution for that.
Это, не знаю, как это передаётся на камеру, but this is a magic sounding guitar. It has high lows and mids. It's got everything. Introduce some um overdrive and work backwards. Let's go for some um kind of medium overdrive from the tube screamer and we'll see.
And this is laser cut, right?
It's interesting. It's like the Again, I don't know what the mics are going to pick up, but it sounds like the mids are in a really different place on the Cutler compared to either of the other guitars. It's got this bite this bark.
Uh this this version is just um engraved on the CNC.
Um kind of a lower mid-range bark that seems kind of much rockier. I don't know if that's the case. I'll do one more test. I'll put some uh put some fun on. Uh maybe a jewel delay with a bit of
Yeah.
[screaming] Yeah, man. That's really interesting and it sort of All the guitars sound good to me in this room. They sound great, but they sound different enough to warrant you know,
But that version and the version that'll be on your neck will be lasered because it
being separate instruments in the in the uh the arsenal, so to speak. What you heard that with this one is at that level of gain and volume. And we are I mean, it's loud and there's a reasonable amount of gain. Mid-frequency gain as well.
just I mean that that that can get to a pretty good level of detail
This one becomes uncontrollable with feedback at that level. Or at least requires a different approach. The Cutler, considering it had that issue with the microphony on the bridge pickup before, um is coping exceptionally well and I love the harmonics it's generating,
Yeah.
quite different from the Strat, which, you know, sounds like a Strat with high gain. I'm really encouraged by that. Um I'm really glad the guitars sound different. Obviously, it's a little bit arbitrary cuz I've just got the pedals set up how I normally set them.
and sharpness, but the laser just goes that extra
I've done no dialing in. And you know, I'll say again, this and my '61 Strat are the best guitars I have ever owned. I mean, they are my two favorite guitars of all time ever that I've ever owned. So, to just drop the Cutler into that cold and expect it to even
Yeah, yeah.
be in the same spot, let alone the same gain, is a big ask. And I think it's standing up quite nice. Yeah, man, that's booting pretty well. That's booting pretty well.
stage further and I'll be able to infill that with some uh some black lacquer to
[screaming] I don't know if the camera's going to be residing focus.
make it stand out.
Fuzz. Uh right at the end there. I think that's enough. I think that's enough. I think I I've got a really good idea of what's going on. The guitar reacts differently when you turn it down. I'm going to attempt to wire it 50s, maybe. Um and I don't even talked about the vibrato.
So, yeah, well and and I it may end up on the back.
Dean set it up to float. And it seems to work quite nicely. Weirdly, as a, you know, 40-year strat player, I'm not I don't use the vibrato a lot, to be honest. I'm just used to it being there for the sort of tonal and feel effects that it has. I tend to set it flat on the body,
Don't know. We'll see.
but I kind of want to get into using it a bit more. So, in this it's set to float a little bit. It's um I need to put a spring in the bottom of the um thing, because it does do that, but
We'll see. Decisions to be made.
All right. More more work required. Yeah, cool. All right. I think that gives us a really good idea of some of the sounds that this guitar is doing. Um overall, I would say uh well, I don't know. I need to go out and play it and play it on that pedal show and and
Cool. And um spectacular coffee.
figure it out. But, what I dig, and I I'll probably reiterate this in other parts of the video, it's really different from my Strat, despite being the same shape, despite being ostensibly the same thing, but with different pickups. It is really different.
One decision we have to make today is pick guard material and uh Dean has very
And it's on the way to the 345, but it's very different from that as well, or a 335, or the Les Paul. So, um there you go. Some sounds. What haven't I talked about? I don't know. Like I say, it's hard to say something coherent,
kindly picked out some groovy um sheets.
try and play well, and uh maintain focus on all of the above. I do find it hard to play the guitar and listen to what's happening. Sounds weird, doesn't it? Okay, back to the program. Here we are, then. Part 2,526. Homer's Odyssey has nothing on this. Soldering iron, guitar.
These are cellulose.
There are no fat ladies. Uh there's definitely no singing. Um and the only music you can hear are the tiny violins around my broken soul. Um What happened? Uh well, let me tell you a story first. I've been going through a thing with my car for the last 18 months.
Oh, are they?
Started with a deflating rear driver's side wheel. Tire, should I say. First assumption, puncture. No, cracked rim. Okay, cracked alloy wheel. Let's have the alloy wheel repaired. We get the alloy wheel repaired, still going down. Have the alloy wheel wheel repaired again,
So, they're in you know, they're a bit obviously quite quite thick.
still going down. Hmm. Replace the tire. Still going down. Uh car goes to MOT, alloy wheel cracked beyond repair, needs new wheel. Buy new wheel. Tire still going down. Mini punctures, apparently. Buy a new tire.
Yeah.
18 months, over 2,000 pounds. And when you think about that, you could buy a lot of effects pedals, maybe even a custom shop strat if you were lucky, for around that kind of money. It hurts. Throughout, the voice of Eckhart Tolle echoes in my head,
And we can get a nice rounded edge.
that you are in exactly the place you need to be, and the universe is giving you exactly what you need right now, in this moment. This is all happening for a reason. This is all happening for a reason. I don't know what that bloody reason is, but it is happening.
I think they'll look really classy.
Anyway, I got to a point where I was kind of happy with it. Simon Jarrett came in to film a show with us, and we decided to try a treble bleed mod for the interest of the show. Um we were a bit unfair on Simon in the day. We were asking him to do a lot in a really short time,
Yeah, yeah.
and then we got really pushed for time to finish the film before VCQ. Anyway, it's ended up with a problem. Um a fault. So, we never really got to hear the treble bleed. We did get to hear the treble bleed in Dan's guitar. But what he also did in Dan's guitar,
When you do see
which you can see in the video, is he put a switch on, so you could tell between 50's wiring and normal wiring, and whether the treble bleed was in or out. I didn't care for the treble bleed at all, as I've never cared for any treble bleed except the one in my PRS DGT,
Just as a single ply and you don't make it any thinner,
which I don't want to take out purely because the guitar sounds so good, and I don't want to change it. What it has led me to decide though is that the best configuration possible for these pickups, given that they are PAF spec mini humbuckers, is to just wire them 50's.
it stays that thick?
It leaves me with a couple of issues. Three knobs means I can't do the four-pot Gibson thing, which I really want to do. Secondly, let's do this. this switch and that knob position puts me in strat mode, which we know about.
Yeah, stays that thick.
So, can I is there a way in which I can wire it that gives me 50's wiring, which is what I want, so it sounds great when I turn it down, and not the confusion of that switch? And how did the wheel resolve itself? It hasn't. It's going back in for a new valve.
Yeah, cool. That is quite thick.
Cuz the valves are separate on this particular type of car, it would seem. Hello scratch plate, my old friend. Will this bollocks ever end? Danger, I've been doing some thinking. And one issue I had with the three-way switch was when you switch it, it's super clunky, right?
Um and of course there's a darker version.
Because of the unpotted nature of the pickups, and you hear that conk every time you uh move it. Secondly, I just get so confused with wiring diagrams, and the five the three or the five-way switch Fender switch is just like it drives
When you when I ordered them, you know you've no idea what they really going to look
me nuts. A Gibson one is much easier to understand. So, I'm going to do something potentially unthinkable, and check this. This came out of my old Gretsch, the 5422, and it's a shallow one, so it will fit in there. Sorry, pointing the camera in the wrong place. [snorts]
like, do you? But
So, I might get rid of the old five-way look. Put the three-way in, and wire it like an Explorer. Oh, dog's barking. Now, it doesn't mean this is going to be a bit ugly, cuz I'm going to have to drill a hole, and I'll have two holes left. But at this point, dog's barking.
Oh, I like that one cuz it's or it's more orangey.
Um I'm willing to try it, actually. I'm just I've got a wiring diagram from Lindy Fralin that I've just sent to Matt Gleeson to say, "Is this 50's wiring?" Cuz I get so confused. I get so confused. Rosie, what you doing? Rosie here? Here's the spaniel. You helping?
Yeah. Now, I mean that will play really nicely.
Not really. What are you barking at? Hey. Boo. Just check with Matt, the wiring diagram is good. It is 50's wiring. The tone pot has to come after the volume pot. I think. I don't know. I just I can't get this stuff into my head.
That looks killer.
Right, I don't have a drill big enough to do this. But I do have a countersink. So I can go straight down through there. And as long as I don't go too far, I'll do it from both sides perhaps. That will be the right uh diameter for this.
I mean there are some other pick guards over here.
Um The gold is going to go with the knobs and the pickguard and the orange of the guitar. These are the clash point, but that's okay. And it's going to be a bit ugly because we've got holes here that we don't need.
So, if you look at the like uh that's a very nice aged
If it works, maybe I can get Dean to cut me a new pickguard specifically for this. But um functionality-wise, ease of wiring, and hopefully losing that horrific clunk of the Fender three-way will make this successful. Let's see. Mick and drill hilarity once again.
Yeah, that's your classic.
Let's see if we can ask this up then. Ooh. It's a nice cracking noise. [sighs]
Classic. I mean it's going to have mini humbuckers,
Great. That's great. [snorts] So, I suppose the thing to test is does it fit in the guitar? Will this width fit in the guitar? Because the switch I want the switch on this orientation, so it makes um makes sense logically.
we'll get onto that in a minute, but I mean that looks pretty cool,
I'm just going to check that it will drop into the guitar and this route is big enough to take it. Uh it doesn't look like it will, which is kind of annoying. The switch won't go in there. Because it won't go in on that orientation, which is a real ballsack.
but I want something I will have said all this in the intro,
I should have checked this. Looks like I'll be able to get it straight up and down. Gibson style. Not ideal, but we'll go with it. Deja vu? Uh okay. It ain't pretty. I've I've sort of lost the will at this point. Anyway, it's wired up.
but I want something that is not that.
Going [snorts] to drop it in the guitar and see if it works. Yeah, middle age. It's in. We have the Marshall MS2 of Destiny. Signed by Jim Marshall. Я уже говорил об этом? Эм, я подключил разъём, чтобы увидеть, работает ли он. Это момент, когда сердце в горле.
Yeah.
Точно, bridge pickup. Счастливые дни. Ага. Tone pot работает. Volume pot работает. Neck pickup. Volume pot работает. Tone pot работает. Middle position. Они оба работают.
Something that is familiar enough,
Счастливые дни. Хотя при 50‑х проводке, если один откручен, другой не должен работать. Возможно, я не провёл её по схеме 50‑х. Ох, мама. Это не мои очки, но они помогают мне видеть. Эм, ночь опустилась на приход Guitarwiring-shire. Эм, я понял, что сделал.
but different enough.
Когда ты находишься в средней позиции на Gibson с 50‑х проводкой и ставишь один из пикапов на ноль, он должен быть тихим. И я понял, что я наделал, а именно эти чертовы потенциометры Bourns, которыми я был в полном восторге ранее и как они были крутыми,
I really love that slightly more red one.
Я перепутал клеммы два и три, не так ли? Потому что они расположены странно. Они не выстроены в линию. И, эм, я перепутал клеммы два и три для bridge pickup. поэтому я их поменяю. Так что всё должно выйти наружу снова.
That looks killer.
Поменяю их местами, и, надеюсь, наконец получу свою гитару с проводкой 50‑х. О боже, сейчас субботняя ночь. Что я наделал со своей жизнью? Почему я ношу эти очки? И столько других вопросов. Как я и ожидал, не знаю, видите ли вы. В общем, темно.
That it was that is just a a bit of cheap test stuff,
Я реально не выношу потолочные светильники, но ладно. Итак, bridge pickup, счастливые дни. Neck pickup, Middle position, и если ты уберёшь один из них, например, если я сейчас уберу Neck pickup, bridge pickup перестанет работать.
so I was getting the positioning right and actually just adjusting the shape and
[sighs] Согласно правильной проводке 50‑х годов. Собираюсь натянуть его. Эм, посмотрим, работает ли. Похоже, работает.
things.
Норкс и лорди, блэйми О'Райли. Чёрт побери. Думаю, я счастлив. Эм, я не знаю. Что? Нужно туда пойти, чтобы вернуться? Дорога излишеств ведёт к дворцу мудрости, может быть. Иронично, но мы вроде бы вернулись туда, откуда начали. Два объёма в одном тоне. И я рад этому.
Yeah.
Есть два основных различия. Первое — этот регулятор теперь управляет бридж‑пикапом. А этот управляет нек‑пикапом. Но это противоинтуитивно для некоторых людей, хотя для меня это имеет смысл. Я просто не мог разобраться, когда всё было наоборот.
Um but it does give you an idea as well if you did just want to go down a plain
Во‑вторых, мы, эм, заменили переключатель в стиле Fender blade на переключатель в стиле Gibson. И он действительно чуть меньше грохочет. Он всё ещё грохочет, но гораздо меньше, чем blade‑переключатель. Эм, и это звучит глупо,
black route.
but just that style of switch puts me in a more Gibson frame of mind, which is what we're dealing with with these pickups. Uh with these parts, but more importantly than that, much more importantly than that, first of all, retain 50's wiring.
Yeah, to me that's like very rock and it says a different thing.
So, it does I think I felt like it had lost a little bit of brightness going to standard wiring when you turn the volume down. And perhaps most importantly of all, the blend of the two pickups is now variable because in the middle position you can change the relative um volume.
This is kind of like almost got like Cougar Koster vibe.
And that changes all kinds of things. Let give you a quick demo of that. So, here we are in the mid position, both volumes full up.
Yeah.
Maybe relatively subtle with a clean sound, but as you pile gain on those differences are marked and you can just sort of sit it in in the right place for the amount of vocal quack in that mid position. After that, um, full out bridge pickup.
Which I which I really dig.
Oh, yeah. You can have a quick look at that. That's the story for another day.
Yeah, I I sought long and hard to find that stuff.
Um hopefully what you can hear is the neck pickup retains good amount of clarity thanks to that 50s wiring and also I haven't mentioned this in the whole video. The reason we put it back here a bit um is so that it's a bit clearer.
Did you?
I've always struggled with neck pickups that are right against the the end of the гриф. Эм, я не знаю, что ещё сказать. Я действительно доволен этим. Um Something I was messing around with earlier maybe. Uh
And that's from day one I kind of had that in my mind.
It's done. I'm happy. And if that was as painful to watch as it was to make, I don't blame you for turning off. It's done. It's a great, great, great guitar. Dean, thank you so much. Matt Montys, thank you so much. Took me a minute to just find my feet,
Yeah, yeah.
but I'm expect to see a lot more of it on that pedal show. Despite the seemingly minute variation from what you would consider as the classic Fender Stratocaster design, you know, it ain't a fan fret Kiesel, right? It's not uh one of those things, Strandberg. It's not that.
So, well as soon as you said tortoiseshell thing,
It's not a Parker Fly. It's not a Teuffel Birdfish. Um what it is is far enough away from what I know uh enough to drag me away from what I know. And that's good because I think that's what starts to pull us in the direction of that voice that I talked about earlier,
I didn't want to put an ordinary tortoiseshell on it.
that little voice in the back of your head that is somewhere uniquely you, rather than trying to emulate, you know, in my case Landau, Stevie Ray. You know, it it's all part of the cake, isn't it? It's all part of how you sound, but perhaps perhaps if you take the time,
I wanted something a little bit more unusual.
if you let the guitar direct you a little bit, and you're brave enough, we'll see. Um you start to appear in the mix, which hopefully is what we're all after at some point down the line. Anyway, um I want to say massive thanks to Dean for being so understanding,
I I think it for me that's an easy decision.
for also understanding that I take years to do anything, whereas he's like, "Come on, come on, come on." And I'm like, "Oh god. Oh god." Um I'm I'm a bit of a slow operator in that respect. Um And obviously I wish Dean all the best in his um in his guitar making from this
I love this. I love this cuz there's just enough orange in it for [snorts] it to for
point forward. Thank you for watching That Pedal Show. Uh we really appreciate it. Thank you to our patrons on Patreon. Please go to that pedal show store and buy stuff. Uh guitar hero polo shirt in stock now. And um, yeah, we'll see how it unfolds. I'm excited. I'm excited.
it to be right.
See you soon.
Yeah.
—
Yeah.
—
And I actually you can see when you get it on the guitar,
—
it brings out the darker black smoky side of it as well because you're layering up
—
your orange. So, I think that
—
This is super nice.
—
Super super cool.
—
Okay, decision made.
—
Related decision.
—
Yeah.
—
Do you want to cover on the back or not?
—
No, thank you.
—
Perfect.
—
Yeah, we'll just that will we'll not do that.
—
I don't Well, maybe we can talk about that another time,
—
but no, not required.
—
I generally don't put them on as a rule.
—
I do.
—
Yeah, it's not something I I always will put one in a in the case if if somebody
—
wants to put one on, but
—
Yeah.
—
it's just again part of the vibe really.
—
Yeah, yeah. I know I always whatever strap style guitar I have,
—
they always come off incidentally.
—
Yeah. Yeah.
—
But cool. All right, we'll talk about the pickups and hardware in a minute.
—
Right, Dean has asked me to bring a couple of things today.
—
Pickups,
—
strings, and hardware, which we'll get on to a minute,
—
but somewhat weirdly, Ainsley's on the telly.
—
Uh I guess he's also playing the guitar.
—
I've never actually seen this.
—
Oh, somewhere there's another bloke on the stage that looks a lot like me.
—
Who's that there?
—
It's your younger, better looking brother,
—
isn't it?
—
Pickups, we've gone for
—
Montys.
—
And I was really desperate to try these.
—
Matt's '61 mini humbuckers.
—
Oh. Have you seen these before?
—
No, no.
—
Wow.
—
I just I kind of wanted a HH strat,
—
but not full size humbuckers.
—
Matt and George, the lovely people at Montys,
—
and there we go.
—
Wound for Michael Taylor.
—
There you go. They didn't actually know that I ordered them online.
—
They didn't know they were for me.
—
So, I ordered it Michael Taylor.
—
And that's what they've put there.
—
They didn't realize they were for me.
—
So, I did send Dean the measurements of these.
—
There I am.
—
I'm mightily relieved.
—
Have we got the Have we got it right?
—
Definitely. Now, I did actually cut that cavity a little bit bigger because one of
—
the things
—
Just in case.
—
that I wanted Well, just in case, but also depending on if you just wanted it a
—
little bit closer to the bridge
—
Yeah.
—
or whether you wanted it to come a little bit further forward.
—
So, just a little bit of
—
God, I haven't thought about that.
—
adjustment there.
—
Um but the front one, that is pretty much fantastic.
—
Woohoo. And you'll do a light aging job on those as well.
—
Yeah, absolutely.
—
We'll take the We'll take the outer lacquer off.
—
Yeah.
—
Little bit of aging and then sort of lightly polish them back up again.
—
We'll get a little bit of string wear marking on there.
—
Um
—
I went for nickel covers obviously cuz it's much easier on nickel than it is chrome
—
presumably.
—
Yeah. Yeah, it it it it prefers the the acid bath.
—
Which is like
—
ferrous oxide.
—
Okay.
—
That's what I use.
—
Um But yeah, that'll Yeah.
—
We should be able to make that quite subtle.
—
Awesome. And hardware uh we've gone for um
—
a a year or two back, Trev Wilkinson,
—
who is a very old friend, um got in touch to say he had some hardware he wanted us
—
to try.
—
It won't be that one, which is far more functionally
—
useful.
—
I'm mighty surprised you had that in there actually.
—
Yeah, yeah. It will be this one.
—
Yeah.
—
Which is the year one bridge, which is Trev's most accurate
—
recreation of a original strap bridge.
—
Um which, you know, we'll talk about that elsewhere,
—
but you presumably you've seen one of those before.
—
Yeah, I've got one of those.
—
Um I've been testing one in there,
—
so the measurements and cavity etc.
—
I know that is going to fit
—
Yeah.
—
just nicely.
—
Again, we'll do a little bit of little bit of aging.
—
We'll just take the the the the outer lacquer off and just give it a little bit of
—
Awesome.
—
a little bit of fade.
—
Don't touch it, but yes, nice, lovely.
—
It's nice to have a weight to it.
—
Yeah, so um obviously all the bits in there.
—
I don't know how many springs we'll end up with.
—
We'll see.
—
And uh yeah, as I say, much more functionally useful,
—
but there's something about the aesthetic and the function of the old one that I,
—
you know, 35 years of playing a guitar,
—
can't change it now.
—
And your tuners.
—
Oh, bless you. Okay, so we got Gotoh staggered post.
—
Yeah.
—
Um
—
They split.
—
Yeah. So I I've long long said that I just love these
—
and uh Dean suggested the staggered post so we get the break angle over the nut.
—
Yeah, get the break angle and actually for me,
—
I try and avoid putting a string tree on whenever possible.
—
I just cosmetically it sets off my OCD.
—
Yeah, yeah, yeah.
—
Happy days, man.
—
Happy days. Happy days.
—
I I do have um there's a small part of me that's willing to bend from vintage
—
spec.
—
It's quite [clears throat] a small part,
—
but but there we are.
—
Cool. So, that's it then.
—
Actually, you haven't spoken about pots and cap values and all that.
—
That will be one interesting question about these pickups,
—
whether they require 500s or 250s.
—
I would imagine 500s cuz they're I think they're pretty bright mini humbuckers.
—
Yeah, I reckon I reckon 500s.
—
I I think well, we can start with 500s.
—
I mean, we can ask Matt, but I I would say start with 500s.
—
Yeah.
—
If you don't like them, we change them.
—
Yeah, yeah, I think so.
—
Oh, here we go.
—
Not bad, not bad, not bad.
—
Get off my telly.
—
I'm going to talk loudly because AC/DC is on the TV and um they'll get us for
—
copyright for sure.
—
Uh, strings.
—
So, obviously, uh, the Stringjoy strings that Dan and I use,
—
those are my gauges, which um are sort of halfway between a 10 and an 11
—
and are working nicely.
—
So, Dean will obviously work with those to um to make it all right.
—
Nice.
—
It's funny all the stuff you don't think about.
—
So, one of the things I'd never really thought about is the distance the bridge
—
pickup needs to be away from the bridge with a mini humbucker.
—
So, we just made an arbitrary decision based on where a single coil would be and
—
where a standard full-size humbucker would be.
—
And then, um what else did we just decide?
—
Oh, yeah, pick a pick guard in terms of what control layout am I going to go with?
—
And we decided that I'm actually moving away from the three would hurt.
—
Because it's two pickups, you actually only need two knobs,
—
right? Volume and tone.
—
But I've decided let's make it like a Gibson and have separate volumes for neck and
—
bridge pickup and then a master tone.
—
So we will have three holes.
—
Volume, volume, tone and a three-way blade selector just so that it's not too
—
unfamiliar and just to make the final point in this
—
material.
—
Ah, it's so cool.
—
So we're in a workshop which is Dean's garage and you were just explaining to me
—
you've invested in a CNC machine.
—
Yeah. Yeah, second machine.
—
So presumably this cuts bodies, necks,
—
pick guards, whatever you want it to.
—
Absolutely. Well, you can see you see where I've been doing your pick guard.
—
You can see that you when it it cuts through.
—
Um I will see the tests on the carving of the the name and the logo and all that
—
kind of stuff, all of that on there.
—
All done there. And if you've got a CNC,
—
you need proper extraction.
—
And you need What's that?
—
So that's a planer so you can join your two-piece Never never Well,
—
maybe a three-piece one day.
—
But um yeah, for your two-piece bodies you've got to have an absolutely flat perfect
—
join in the middle.
—
A leveler, is it?
—
So this is a uh this is another planer but it's for thicknessing.
—
So basically to get to your 44.5 body thickness
—
Yeah.
—
before you go anywhere, before you even join the pieces together,
—
you've got to bring that
—
down to 44.5. This is massively accurate.
—
Wow.
—
Incredibly accurate.
—
I do love machines.
—
Significant [snorts] investment, isn't it?
—
And there's you know, it's a it's a small eye into the world of a small scale guitar
—
builder because you know, the amount of effort you have to put in to get this stuff.
—
You've got to make some guitars, right?
—
Yeah.
—
And don't forget the spray room which is this is about to go through
—
An internal garden shed.
—
This is about to go through more work.
—
So that was my quick and dirty extraction.
—
Yeah.
—
Um but what I need to do is create a a cabinet,
—
really. So, I can have the whole side filtered.
—
I love it.
—
a much more even air flow.
—
Oh, man, I love it.
—
Inlet filtration on that side as well.
—
So, they've got a proper air flow.
—
To be honest, I've been mightily surprised and pleased at how well I've been able to
—
Yeah.
—
get the finish with what I've done,
—
but you've got to You've got to keep improving all the time,
—
aren't you?
—
Keep moving.
—
It is mad. And I suppose that encapsulates the challenge challenge of guitar
—
building in general in that you know,
—
Dean can make a really, really, really fantastic guitar.
—
Once you start trying to make, however many hundred a year,
—
then there's no way you can do it on your own.
—
So, you have to upscale, and that is the entire problem of guitar factories.
—
Yeah.
—
100%. And possibly get into that very sticky subject of CNC versus hand
—
carving.
—
Wow.
—
Don't use a machine.
—
But, um, but quite frankly,
—
I would say if you use a router in any stage of your guitar
—
building, you're not hand finishing it.
—
You are
—
A CNC is just a really complex router.
—
Yeah. I mean, it's a no-brainer for me.
—
I've I've visited Taylor, I've visited Martin,
—
PRS.
—
And, you know, they're they're unanimous in that if if if a machine can do it
—
better and in less time, why the hell would you do it by hand?
—
Yeah, yeah.
—
Consistency.
—
100%. And that For me, the key to the CNC ultimately is going to
—
allow the customization very quickly and easily and cost-effectively.
—
Yeah.
—
Neck profiles that we're obviously we're we're about to talk about,
—
I can offer absolutely any neck profile.
—
And really make very little difference to me in terms of time and effort and cost
—
because
—
once I've built up the library of files in the in the design file side of the CNC
—
machine, then I just use a different file,
—
you know? And it it gives you a huge amount of flexibility.
—
Amazing. Amazing.
—
Amazing.
—
We started to talk about necks.
—
We're going to go for a roasted maple uh hopefully a
—
one-piece roasted maple neck.
—
These are just some blanks that Dean's made up.
—
What's this wood, Dean?
—
That's actually um sapele.
—
Sapele, yeah. I was going to say it's definitely not maple.
—
Um just to have a look at profiles and things.
—
One thing we are doing is having a look at the old Strat.
—
Not to copy it cuz I don't want it exactly the same,
—
but um just taking some measurements to see one of the things I've talked about this
—
in vlogs a lot before, like the taper of the neck as it gets thicker down towards
—
the 12th fret is quite significant on vintage Strats,
—
certainly on this one.
—
I've measured that in vlogs before in in case you're interested.
—
And um it's kind of more unusual on the more modern guitars get to have that
—
increasing depth up the neck.
—
They tend to be flatter.
—
So, we're just getting a sense of what that looks like.
—
Um you know, we know what the nut width is.
—
Uh etc.
—
etc. and profile just to see you know,
—
just as a as a measure.
—
Not to copy it because I don't want it copied.
—
It's not I don't want that.
—
Um Dean has a guitar here and in some ways I prefer the shape of this neck
—
um to my old one, but there is a familiarity to the old one.
—
So, maybe that we end up with a hybrid or something,
—
but um yeah.
—
So, you're putting all the measurements in?
—
I I'm converting to I I was measuring work in millimeters,
—
yeah, but the reference charts are all in
—
They're all inches.
—
Are you surprised by what you've just seen or
—
Uh I'm surprised at how thick it is at the 12th fret.
—
Yeah. Yeah.
—
24.21 compared to uh
—
21
—
Oh, wow. So, it's significant.
—
on on that one.
—
Wow. That is significant.
—
So, it's 3 mil difference.
—
Well, there we go.
—
A couple of very pleasant hours spent um geeking off on guitars and things.
—
Asked me all questions that I hadn't even thought about.
—
And um we've agreed pretty much everything.
—
There's a couple things just to finish off right where we started.
—
What are we going to do about this um laser uh carving
—
uh the we've decided that the decal's going to be a transfer float kind of similar
—
to this one.
—
I dig it.
—
And uh I've got to decide on knobs.
—
But that's easy enough.
—
Um doesn't affect the next build process.
—
You just got to do that.
—
Keep going. Keep going.
—
Keep going.
—
Yeah, we can Yeah, we can crack on,
—
and if the last thing we do is put the different knobs on,
—
and put some on, and change our mind,
—
and put some different ones on.
—
That's That's That's not going to hold anything up,
—
so that's all good.
—
Awesome. Dean, thank you so much for today.
—
It's always a flipping education to see this stuff happening.
—
[snorts]
—
And um yeah, I'm I'm gassing for it now,
—
big time.
—
Brilliant.
—
Cheers, bud.
—
See you soon.
—
And now we were rolling.
—
It was actually happening.
—
I'm not sure how much of this I reflected on in my conversations with Dean,
—
cuz it was such a long time ago now,
—
but you know, worth saying, the inspiration for this I got to nod to Michael Landau.
—
Michael Landau, if you don't know who he is,
—
um among my favorite guitar players of all time ever.
—
His approach, his tone, everything about what Michael Landau does on a guitar is
—
like Anyway,
—
um he's played lots of guitars over the years,
—
and in the last decade or so,
—
was seen with more Johan Buca strat type guitars,
—
um and a couple modifications from previous years.
—
And uh there's no doubt that seeing him playing that,
—
also Ariel Posen, I have to say, who was playing a double humbucker strat style
—
guitar, um and of course, all the people down the years who have done it
—
just to be different enough uh from the regular three single coil strat,
—
which I know so well.
—
So, um yeah, massive nod to Michael Landau.
—
But more than that, a A part of the motivation was after speaking
—
to Joey Landreth, who's a really good friend of mine,
—
Chris Buck, who's a good friend of mine.
—
Um I'm lucky to say in both cases.
—
Their choices of guitars, as they started to pick up momentum in their careers,
—
started to be influenced by the fact they didn't want to be tied by the stereotypes
—
attached to certain guitars.
—
That sounds a bit overblown for me.
—
You know, I'm not an artist.
—
I'm not releasing records or touring or anything like that.
—
However, my experience is that when I pick up a strat,
—
I start to play strat things.
—
Which is, you know, all good if you're trying to be John Mayer or Jimi Hendrix or
—
whatever. Um and if I pick up a 335,
—
I play it in a certain way.
—
And the same for Les Pauls.
—
I really like traditional guitars.
—
And that's all good.
—
That's what we want, right?
—
We want to sound like our heroes, or at least we want to emulate our heroes.
—
But what I've noticed in recent years,
—
and and you may be able to relate to this,
—
somewhere there in the back of your head,
—
you can start to hear yourself coming forwards.
—
And even at the tender age of 52, which is what I am now,
—
I'm starting to just trust it a bit more.
—
Having a guitar that is not,
—
you know, absolutely traditional spec,
—
which I've been so mad about for so long,
—
does put you in a headspace.
—
And at this point, I can kind of hear you laughing going,
—
"Well, yeah, mate, it's a bloody strat."
—
Um it kind of is, but it's um it's different enough.
—
It's different enough for me be having been so tied to that three single coil
—
instrument that we know and love, and I have loved ever since I've been 10 years
—
old. And as usual, while I'm getting lost in my head thinking about all this stuff,
—
um down the road, Dean was actually making a guitar.
—
Right.
—
Genuinely filming this.
—
Hello, Dean.
—
Good morning.
—
Uh as I've arrived, I haven't clapped eyes on the guitar yet,
—
so I thought we'd do this um as a genuine reveal.
—
Um to actually capture the uh to capture
—
the response.
—
Obviously, I'm a bit trepidatious,
—
but how are you feeling?
—
Equally the same.
—
Excited, nervous, anticipation,
—
etc., etc.
—
There we go.
—
Oh my god.
—
Well, at the moment I'm looking at it through a lens,
—
so I'm going to stop doing that and look at it with my eyes.
—
Let's just set this up.
—
I know. We've got to capture it all,
—
haven't we?
—
Otherwise where do we get to?
—
Oh, mate, the sparkle is really sparkly.
—
Have you done the bridge?
—
Yeah, yeah, yeah.
—
No way. So, you don't you Yeah, you've aged the pickup covers and the bridge.
—
Yeah. Aged the bridge, trem arm.
—
Actually, you know, I aged the knobs a little bit,
—
just rounded them off and things.
—
Oh, we can talk about all this in a minute.
—
Oh, dude.
—
Look at that neck.
—
[snorts]
—
I'll explain all the specs when I'm not concentrating quite so hard,
—
but and you cracked the finish a bit as well.
—
Yeah, exactly. So, we've got the checking in there because it's we've got quite a
—
deep gloss on it.
—
Um it it it doesn't really ping yet,
—
but that is just going to bloom in the next 6 months,
—
12 months,
—
etc.
—
So, there's a bit of um obviously,
—
I have given it a little bit of a knock around.
—
Yeah, yeah.
—
There's a few dings and dents, but it but again,
—
it it the reverse side of getting a actually quite a nice uh glossy nitro coat on
—
there that actually it's it's it's really good nitro,
—
so it doesn't like being it [snorts] it doesn't want to dent and chip particularly
—
well. It's quite robust.
—
Um
—
[clears throat]
—
so
—
It looks it looks utterly killer in the flesh.
—
I've seen a picture,
—
obviously.
—
Oh, mate, that neck is bonkers cool.
—
Okay, so uh Dean and I just had a cup of coffee and a general chat,
—
but taking out the case for the first time and a quick
—
play, I guess you're tempted to plug it in
—
um straight away and I'm like I've just said to Dean,
—
I don't want to I almost don't want to plug it in cuz I am digging the way it
—
vibrates and resonates.
—
Just to say straight off the bat, Dean set it up what I would call confidently,
—
so it's got some relief in the neck and a relatively uh or a medium to high action,
—
which is what I like.
—
So, it doesn't feel
—
like a very um sometimes if you go into a guitar store and you play a high-end
—
guitar, to me it's going to sound terrible.
—
They can feel like toys cuz they're just set up so light and so slinky,
—
which a lot of people like.
—
I don't like that.
—
And it feels like a a real guitar straight out the bat,
—
you know, like you can hit it.
—
It just feels really inviting.
—
Compare it to something similar to a 6105 or AR 6105.
—
It's the um just car version.
—
It's like uh 0.5 of a mil difference.
—
Slightly slightly wider.
—
Right. So, they feel fantastic.
—
Fret ends feel really nice, don't they?
—
That's my thing.
—
Yeah. And um and it also unfamiliar is the mini humbuckers,
—
which we'll come to talk about in a minute,
—
but straight in the hands it feels a nice mixture of
—
familiar and new.
—
And like I say, it sounds so nice unplugged that I kind of don't want to plug it in,
—
but we'll do that
—
next.
—
And great, the top string doesn't fall off the fretboard like my bloody strap
—
does.
—
So, I just wanted to record that in the moment um as the initial reaction before we
—
before we plugged it in.
—
Initial sounds plugged in then.
—
I've already done a little bit, sat down and just had a little feel around for
—
what's going going Obviously, this is an unfamiliar territory for me on an S-type
—
guitar.
—
Um I've asked Dean to wire at 50's uh with a separate volume for each pickup
—
and a master tone and as such uh we get the neck
—
pickup.
—
And in the playing that we've just done,
—
it I've been really pleased with how in tune the guitar is.
—
That I'm super happy with that.
—
The bridge pickup feels like it might be a little microphonic under gain.
—
We did a bit of gain playing just a minute,
—
which I will supplement back at the studio.
—
But, um just playing some clean stuff.
—
I'm just going to turn some delay on in a minute.
—
And um the like the kind of in tuneness and the resonance of it I'm
—
digging.
—
I don't know how much that will come across on on the mics we've got set up here.
—
Obviously, I'll do a lot more playing back at the studio,
—
but the initial feeling is one of
—
familiarity.
—
A lot of sonorous kind of fun in the sound and it's just so
—
playable. It's always a bit weird when you pick up a guitar for the first time for
—
obvious reasons.
—
Takes a minute just for you to feel happy to give it a hit,
—
so to speak.
—
Oh my god, what terrible manners.
—
I didn't film a goodbye with Dean um when I picked the guitar up.
—
I think my brain was just so blown.
—
We'd had a fascinating conversation and uh I did say goodbye to him.
—
I just didn't film it.
—
What then followed was the usual period of acclimatization when you get a new
—
guitar. You're sort of equal parts intrigued by it and maybe a bit scared of it as
—
well, cuz you're not entirely sure what it's going to do or how it's going to be.
—
Uh but it became pretty quickly apparent uh Houston,
—
we have a problem.
—
And an actual full-blown obvious problem would be easy to solve,
—
but this was a bit more nuanced than that because what I discovered was that at
—
lower you know, for most people absolutely normal playing
—
volumes, the guitar sounded fantastic.
—
And even at high volumes on cleaner sounds,
—
it it really does have a unique voice,
—
something that I find very appealing.
—
However, at the volumes I play at and at the distortion levels I play at stacking up
—
various things, um it was clear that there was significant microphonic feedback,
—
uncontrollable microphonic feedback.
—
Now, I want to say I've said I will say this numerous times in this
—
video.
—
It's not the fault of the pickup that it is slightly microphonic,
—
right? Early PAF-style humbuckers,
—
and that's what this is, just a mini version of it.
—
Incidentally, the first versions of which they think were about 1961,
—
weren't wax potted, right?
—
So, they were never designed to um combat feedback in the way that more modern
—
pickups are. And it's really a part of that early PAF sound for them not to be wax
—
potted.
—
However, as rock guitarists discovered in the 1970s,
—
or probably before that,
—
um for my particular style of playing,
—
something was going to need to happen inside that pickup in order to make it usable
—
for me.
—
Secondly, I wanted to rewire it.
—
And again,
—
I'd asked Dean to wire the guitar in a certain way.
—
Um I thought it would make sense to have the pickups on different volume controls,
—
which is how it is in my DGT, my PRS DGT.
—
And I should have known, cuz even having done well,
—
I don't know.
—
Many, many, many gigs, I I to say hundreds,
—
but it was probably a hundred gigs on that guitar.
—
Um I still get totally confused by the the layout.
—
So, I decided to rewire it in the typical strat style.
—
Again, no fault of Dean.
—
I asked him to do it as something different,
—
but it just didn't work out for me.
—
And as I said, it had become apparent I'd started using the guitar um to do bits and
—
bobs of TPS filming.
—
And I'll cut in a bit here.
—
This is before um we actually got going with the main show and I was just playing to
—
warm up a little bit.
—
And it was caught on camera and me and Dan have a conversation about it.
—
So, this is this is real.
—
It's right on the edge.
—
It sounds great.
—
Yeah, it does.
—
Just need to sort that out.
—
What what is it that because I think it sounds amazing.
—
What what don't you like about it?
—
Two things.
—
One.
—
That.
—
Okay.
—
It's just too And then that will go into microphonic
—
feedback.
—
Gee, I'd I'd hate to lose that sound though.
—
And Dan was right, you know, making a change to a guitar that sounds good is
—
dangerous because you don't want to lose,
—
you know, baby bathwater, all that kind of stuff.
—
However, uh the following week I played it for the whole of the 10 Things We've
—
Learned About reverb show.
—
I'll cut a bit of that in as well.
—
And what you can hear is when the gain pedal is on and there was quite a bit of
—
gain, it was quite loud, the guitar is just ready to go.
—
It's just on the edge of that microphonic feedback.
—
Out there in the real world and in there some days I play considerably louder than
—
that and with considerably more gain.
—
So, there's no choice.
—
I had to change it.
—
Not entirely sure where we're picking the story up from,
—
but let's pick up the story.
—
So, it's Friday afternoon.
—
Um I'm waiting for Royal Mail to turn up to collect the orders for the polo shirts.
—
This is an unembroidered one, one of the ones with Anyway,
—
it doesn't matter.
—
Um I was going to go and do this at home.
—
I've unusually been gifted some free time this weekend,
—
so I was going to do it this home.
—
No Royal Mail, so let's get on and investigate here.
—
I think the general plan whip the scratch plate off,
—
have a look what's going on underneath.
—
I just I want to make it absolutely clear all the way through this
—
that it's absolutely no fault of Dean's at all that the guitar
—
isn't that I'm going to change it,
—
you know, I asked him to do this to begin with,
—
[snorts]
—
but um it's not really to my liking,
—
so or at least I can't get used to it.
—
So, I'm going to change it.
—
Problem number one, let's get it wired so that it makes sense to me.
—
Issue number two, the microphonic bridge pickup.
—
Um again, I don't want to like say there's any fault with Monty's for making a
—
microphonic pickup.
—
[gasps]
—
They don't wax pot them.
—
I'll discuss that elsewhere, but it's too microphonic for me.
—
I have fixed uh a Gibson one before by putting some sealant in between the
—
cover and the and the coils.
—
Now, maybe I'll just do that.
—
What I should do is call Matt and ask his advice,
—
but I might just get on with it anyway,
—
cuz that's the kind of mood I'm in.
—
I should be out walking the dog and going for a beer,
—
but no Royal Mail, so um
—
hmm.
—
They call me laissez-faire.
—
Might be a little bit of solder on the old finish there.
—
Nice. Makes it mine, doesn't
—
it?
—
It's not a pedal show, is it, if I'm not laboring over some hilarious wiring job.
—
Um but I'm just going to redo it from scratch just so I know where I am.
—
I'll just start pulling everything
—
off.
—
Incredibly [snorts] annoying, Royal Mail haven't turned up,
—
so I am going to go home after all.
—
Anyway, uh I'll get this all stripped off and um go from
—
there.
—
Okay, we've changed locations.
—
It's a beautiful sunny day.
—
I'm at home. I'm going to whip this pick up out,
—
have a look at it, take it apart, and see if there's anything that can be tightened
—
up in there. Maybe put some sealant in there,
—
just like I did with the PRS SE pickup,
—
or at least the Gibson pickup that went into the PRS Silver Sky SE.
—
Uh that's the nature of these pickups,
—
you know, they are not uh heavily wax potted as part of the tone,
—
but maybe I do need it a bit.
—
Tends not to be a problem in strats,
—
anyway. Tele's you get it because of the way the pickup sits in the
—
bridge.
—
Um but yeah yeah anyway anyway anyway
—
let's have this pickup out and have a look at it.
—
Oh, look at that.
—
Flat screws.
—
And again, I just I kind of want to reiterate that it's not a flaw as such.
—
Um it's inherent in the design of the pickup,
—
and if you want a silent pickup, have it wax potted.
—
But [snorts] there's something about the open and airy nature of the sound of
—
non-potted pickups
—
[snorts]
—
that um well, I love.
—
These two solder joints here, we just need to release those,
—
slip a razor blade down in between,
—
and take the cover off.
—
And because it's not wax potted, that cover should just come off there super
—
easy.
—
Razor blade.
—
I should put it in a little vise or something really.
—
So, I chop my bloody hand off.
—
There we go. There's that one.
—
So, that should come out there now.
—
There you go.
—
Have I managed to not damage it?
—
Yes, I have.
—
Oh, that's interesting.
—
Look at that. How cool.
—
So, the magnet's in there.
—
It's not super tight.
—
Make sure I remember which way it goes in.
—
So, the blue is See that?
—
The blue is facing back.
—
So, if I pull this magnet out now,
—
very gently.
—
Normally, you should Yeah, see that?
—
Normally, you'd have screws that were holding the whole pickup
—
together.
—
But actually, that That is kind of loose.
—
So,
—
hmm.
—
I wonder if that might be part of the issue.
—
Okay. Uh let's just gently peel this back.
—
You can see what's going on here.
—
Okay.
—
I wear my glasses.
—
I can't see.
—
I always keep a bunch of ridiculous high-strength reading glasses nearby just in
—
case.
—
Minimizing any vibration within the pickup itself is what is the thing that has to
—
happen.
—
So, first of all, how tightly does it fit in this
—
cover?
—
And there is a bit of movement in the
—
middle of the cover.
—
Yeah, so be careful of that.
—
I think applying some gentle pressure to the edges of the
—
cover and also to the top of the cover which is what they
—
do at Monty's is a good thing to do.
—
Secondly, I did have [snorts] some success using silicone sealant.
—
This was something suggested by uh Throwback Pickups where you can just run some
—
silicone sealant along the slug coil.
—
I mean, this one's got a bar magnet,
—
so what is that?
—
Is that the slug coil?
—
[snorts]
—
Don't know. I'm showing my ignorance here in a in a big way.
—
Um and then that will seat it to the cover um
—
a little more successfully.
—
And while it sounds not ideal,
—
I have done it in a Gibson humbucker that I fitted to that PRS and it did make a
—
difference. So, I think I'm going to do a combination of those two things.
—
Um use a bit of silicone sealant.
—
Actually physically compress the cover a little bit.
—
I should clean up these solder joints before I do that and then reassemble the
—
pickup.
—
The one thing I don't know is if these I just googled if bobbins should be touching
—
and in a in a normal humbucker they are because it ensures good fit in the case.
—
But, what I might do there's it's spaced at this end.
—
Hopefully, you can see that.
—
It's spaced at this end because there's a bit of wire in between.
—
So, what I might do is equally space it at that end using a tiny spacer like
—
a But, then I don't want to introduce anything that's going to interfere with the
—
coils.
—
So, even a cocktail stick is too wide.
—
God. Here comes chopping fingers off time
—
again.
—
So many sharp things.
—
So many guitar players' fingers.
—
Where's the pickup There it is.
—
There you are.
—
What I might do is put a blob of silicone on
—
that. It'll stop that from moving.
—
Right. Just going to squash that a bit.
—
[snorts] [sighs and gasps]
—
So it's a really tight
—
fit.
—
I guess here goes nothing then.
—
Got my spacer installed.
—
Going to It's It's just touching the tape,
—
and I'm going to put some some silicone in,
—
reseal it, and clamp it, and see what happens.
—
Uh Yeah, I know.
—
Here goes nothing.
—
I mean, this could easily be one of the worst ideas I've ever had.
—
But there we are.
—
Yeah, I don't know.
—
I'm kind of I'm I'm in two minds about what to do now.
—
So I think what we'll do I've been
—
careful to clamp from the top and the bottom so the sides aren't affected at all,
—
but I don't know whether I should actually try and clamp the sides,
—
but
—
[snorts]
—
um on there,
—
being careful not to solder it to the clamp.
—
Okay, so while that's clamping,
—
um I can get on and wire the guitar.
—
Sorry about these glasses, they just help me see.
—
They're Catherine's reading glasses.
—
Sounds a bit bad.
—
Why would you buy a guitar and rewire it?
—
Well, because I I want to say this,
—
I keep saying it all the way through and I want to keep saying it.
—
It's of no fault of Dean and Matt that I want to change things.
—
It's just I want to change them.
—
I went for something experimental and it hasn't really worked for me.
—
So, I'm just going to rewire it.
—
Now, there I've got an ulterior motive.
—
Look what Matt gave me.
—
That, my dear friends, is a Bourns blue pot,
—
which has an interesting story, developed um in conjunction with Schecter,
—
to get the highest quality guitar pot possible.
—
Now, I'm always going through volume pots,
—
particularly on my Les Paul, where I just they just crap out like
—
within months. So, I'm forever replacing the volume pot on my Lester,
—
particularly. And of course, if it goes in the 335,
—
it's a pain, a royal pain to change.
—
So, I'm going to use this as a test case and use the Bourns in this guitar to see if
—
it's any more robust.
—
It's 500k.
—
Uh it's an audio taper.
—
The lugs are a bit weird cuz they're in um well,
—
they just look a bit different, but they are actually in the same places a normal
—
pot. So, um let's proceed with that.
—
Anyway, Bourns pots, if Dumble made pots,
—
he would have made Bourns pots.
—
Right, I'm definitely not filming all of this cuz it'll take me a while as it always
—
does.
—
Um Uh I got a diagram off Lindy Fralin's
—
website um for two humbuckers,
—
master volume,
—
and separate tone for each pickup.
—
So, it's kind of like a strat.
—
So, So go, a Lindy Fralin diagram.
—
Just available from their website.
—
I'll just put it on screen.
—
Lugs one, two, and three, so I don't get it wrong.
—
Anyway, I'll start.
—
And then uh I'll come back when when it's finished.
—
Obviously, I can't wire the bridge pickup in,
—
but I Fine, I can do that at the end.
—
I can get everything else prepared.
—
And um off we go.
—
Okay. I'll see you later.
—
It's the next day then.
—
I've got the bridge pickup in.
—
This whole business here was really tough.
—
I don't know if that's going to focus.
—
Um just because of the positioning of the lugs on that Bourns pot.
—
Um that little bit of un- shrunk shrink wrap there is there just to
—
[sighs]
—
stop anything shorting on the other lugs.
—
It's not pretty.
—
God, it's not pretty.
—
It's really hard.
—
I suppose I could have run the other ground wires off these other pots,
—
but anyway, whatever.
—
[snorts]
—
Um because in theory this should be doing the the ground connection everywhere
—
else.
—
Marshall MS2, signed by Jim Marshall.
—
How cool is that?
—
Welcome to that heart-in-mouth moment.
—
Um the sickening sinking feeling of spending ages wiring a guitar
—
to see if it works or not.
—
Please work.
—
Amazing.
—
Looks like something's not quite right with the uh middle position,
—
but the bridge and the neck pickups positions work great.
—
So I just need to have that off, have a look at the switch,
—
and see if I can learn anything.
—
Great, I've discovered it.
—
On the switch here, I misunderstood the diagram because Oh,
—
sorry, it's not in focus.
—
These two middle lugs have got to be connected for the middle middle position to
—
work. I just checked it, and that does
—
work.
—
Middle position.
—
Neck position.
—
Bridge position.
—
I think we're winning.
—
Tone control works.
—
Volume control works.
—
It's working.
—
Hooray.
—
Boring stuff first and I'll just set the rig up.
—
We'll hear this guitar in a minute.
—
Um I've just I've set it up as I would normally have
—
it.
—
So, haven't tweaked anything for this guitar yet.
—
And I got three prosaic questions to begin with.
—
One is does my wiring work?
—
Two is um has my pickup
—
intervention made it dull sounding?
—
Which is possible.
—
And three has the pickup intervention uh cured the feedback issue?
—
Which I guess we'll find out.
—
So, um I'll just check we're in
—
tune.
—
That bodes well.
—
I've literally just taken it out of the gig bag.
—
Haven't done any sighting lap or pre anything today.
—
So, we are literally checking if it works for the first
—
time.
—
Please, Mommy.
—
Please.
—
Little bit out of tune.
—
The volume control works.
—
As you'll see from the DB meter, it's hella loud in here today.
—
It will be reading slightly more than normal cuz I've put it closer to the
—
amps.
—
Let's put some overdrive on and see what
—
happens.
—
Uh sorry about the awful noise.
—
Okay, does the wiring work?
—
Yes. Uh does the pickup sound noticeably duller?
—
Not that I can tell.
—
And has the microphony or at least the resonance causing microphonic feedback been
—
solved? Yes.
—
And then when I flicked onto the neck pickup,
—
you heard that it was straight into uncontrollable microphonic feedback.
—
Um again, more prosaically,
—
before I actually try and do anything musical,
—
what does it sound like compared to my other two favorite guitars?
—
Um because the idea is Well,
—
I don't know what the idea is.
—
What does it sound like next to my other two guitars?
—
Um let's get the Strat.
—
Now, obviously, what I'm expecting
—
here is the Strat's going to do
—
this, you know,
—
nice Strat thing that we would expect,
—
okay?
—
I'm not expecting the Cutler to do
—
that.
—
As expected, my other favorite guitar.
—
This is a bit weird in the mid position cuz one of the pickups is out of phase.
—
So, we'll stay on the bridge
—
position.
—
This is a I don't know how it translates on the camera,
—
but this is a magic sounding guitar.
—
It has high lows and mids.
—
It's got everything.
—
Introduce some um overdrive and work backwards.
—
Let's go for some um kind of medium overdrive from the tube
—
screamer and we'll
—
see.
—
It's interesting.
—
It's like the Again, I don't know what the mics are going to pick up,
—
but it sounds like the mids are in a really different place on the Cutler compared
—
to either of the other guitars.
—
It's got this bite this bark.
—
Um kind of a lower mid-range bark that seems kind of much
—
rockier.
—
I don't know if that's the case.
—
I'll do one more test.
—
I'll put some uh put some fun on.
—
Uh maybe a jewel delay with a bit
—
of
—
[screaming]
—
Yeah, man. That's really interesting and it sort of All the guitars sound good to me
—
in this room. They sound great, but they sound different enough to warrant you know,
—
being separate instruments in the in the uh the arsenal,
—
so to speak.
—
What you heard that with this one is at that level of gain and volume.
—
And we are I mean, it's loud and there's a reasonable amount of gain.
—
Mid-frequency gain as well.
—
This one becomes uncontrollable with feedback at that level.
—
Or at least requires a different approach.
—
The Cutler, considering it had that issue with the microphony on the bridge pickup
—
before, um is coping exceptionally well and I love the harmonics it's generating,
—
quite different from the Strat, which,
—
you know, sounds like a Strat with high gain.
—
I'm really encouraged by that.
—
Um I'm really glad the guitars sound different.
—
Obviously, it's a little bit arbitrary cuz I've just got the pedals set up how I
—
normally set them.
—
I've done no dialing in.
—
And you know, I'll say again,
—
this and my '61 Strat are the best guitars I have ever owned.
—
I mean, they are my two favorite guitars of all time ever that I've ever owned.
—
So, to just drop the Cutler into that cold and expect it to even
—
be in the same spot, let alone the same gain,
—
is a big ask.
—
And I think it's standing up quite nice.
—
Yeah, man, that's booting pretty well.
—
That's booting pretty
—
well.
—
[screaming]
—
I don't know if the camera's going to be residing focus.
—
Fuzz. Uh right at the end there.
—
I think that's enough.
—
I think that's enough.
—
I think I I've got a really good idea of what's going on.
—
The guitar reacts differently when you turn it down.
—
I'm going to attempt to wire it 50s,
—
maybe.
—
Um and I don't even talked about the vibrato.
—
Dean set it up to float.
—
And it seems to work quite nicely.
—
Weirdly, as a, you know, 40-year strat player,
—
I'm not I don't use the vibrato a lot,
—
to be honest. I'm just used to it being there for the sort of tonal and feel effects
—
that it has.
—
I tend to set it flat on the body,
—
but I kind of want to get into using it a bit more.
—
So, in this it's set to float a little bit.
—
It's um I need to put a spring in the bottom of the um thing,
—
because it does do that,
—
but
—
All right. More more work required.
—
Yeah, cool. All right.
—
I think that gives us a really good idea of some of the sounds that this guitar is
—
doing.
—
Um overall, I would say uh well,
—
I don't know. I need to go out and play it and play it on that pedal show and and
—
figure it out. But, what I dig, and I I'll probably reiterate this in other parts of
—
the video, it's really different from my Strat,
—
despite being the same shape, despite being ostensibly the same thing,
—
but with different pickups.
—
It is really different.
—
And it's on the way to the 345, but it's very different from that as well,
—
or a 335, or the Les Paul.
—
So, um there you go.
—
Some sounds.
—
What haven't I talked about?
—
I don't know.
—
Like I say, it's hard to say something coherent,
—
try and play well, and uh maintain focus on all of the above.
—
I do find it hard to play the guitar and listen to what's happening.
—
Sounds weird, doesn't it?
—
Okay, back to the program.
—
Here we are, then.
—
Part 2,526.
—
Homer's Odyssey has nothing on this.
—
Soldering iron,
—
guitar.
—
There are no fat ladies.
—
Uh there's definitely no singing.
—
Um and the only music you can hear are the tiny violins around my broken soul.
—
Um What happened?
—
Uh well, let me tell you a story first.
—
I've been going through a thing with my car for the last 18
—
months.
—
Started with a deflating rear driver's side wheel.
—
Tire, should I say.
—
First assumption,
—
puncture.
—
No, cracked rim.
—
Okay, cracked alloy wheel.
—
Let's have the alloy wheel repaired.
—
We get the alloy wheel repaired, still going down.
—
Have the alloy wheel wheel repaired again,
—
still going down.
—
Hmm.
—
Replace the tire.
—
Still going down.
—
Uh car goes to MOT, alloy wheel cracked beyond repair,
—
needs new wheel.
—
Buy new wheel.
—
Tire still going down.
—
Mini punctures, apparently.
—
Buy a new tire.
—
18 months, over 2,000 pounds.
—
And when you think about that, you could buy a lot of effects pedals,
—
maybe even a custom shop strat if you were lucky,
—
for around that kind of money.
—
It hurts.
—
Throughout, the voice of Eckhart Tolle echoes in my head,
—
that you are in exactly the place you need to be,
—
and the universe is giving you exactly what you need right now,
—
in this moment.
—
This is all happening for a reason.
—
This is all happening for a reason.
—
I don't know what that bloody reason is,
—
but it is happening.
—
Anyway, I got to a point where I was kind of happy with it.
—
Simon Jarrett came in to film a show with us,
—
and we decided to try a treble bleed mod for the interest of the show.
—
Um we were a bit unfair on Simon in the day.
—
We were asking him to do a lot in a really short time,
—
and then we got really pushed for time to finish the film before VCQ.
—
Anyway, it's ended up with a problem.
—
Um a fault.
—
So, we never really got to hear the treble bleed.
—
We did get to hear the treble bleed in Dan's guitar.
—
But what he also did in Dan's guitar,
—
which you can see in the video, is he put a switch on,
—
so you could tell between 50's wiring and normal wiring,
—
and whether the treble bleed was in or out.
—
I didn't care for the treble bleed at all,
—
as I've never cared for any treble bleed except the one in my PRS DGT,
—
which I don't want to take out purely because the guitar sounds so good,
—
and I don't want to change it.
—
What it has led me to decide though is that the best configuration possible for
—
these pickups, given that they are PAF spec mini
—
humbuckers, is to just wire them 50's.
—
It leaves me with a couple of issues.
—
Three knobs means I can't do the four-pot Gibson thing,
—
which I really want to do.
—
Secondly, let's do this.
—
this switch and that knob position puts me in strat mode,
—
which we know about.
—
So, can I is there a way in which I can wire it that gives me 50's wiring,
—
which is what I want, so it sounds great when I turn it down,
—
and not the confusion of that switch?
—
And how did the wheel resolve itself?
—
It hasn't. It's going back in for a new valve.
—
Cuz the valves are separate on this particular type of car,
—
it would seem.
—
Hello scratch plate, my old
—
friend.
—
Will this bollocks ever end?
—
Danger, I've been doing some thinking.
—
And one issue I had with the three-way switch was when you switch it,
—
it's super clunky, right?
—
Because of the unpotted nature of the pickups,
—
and you hear that conk every time you uh move it.
—
Secondly, I just get so confused with wiring diagrams,
—
and the five the three or the five-way switch Fender switch is just like it drives
—
me nuts. A Gibson one is much easier to understand.
—
So, I'm going to do something potentially unthinkable,
—
and check this.
—
This came out of my old Gretsch,
—
the 5422, and it's a shallow one,
—
so it will fit in there.
—
Sorry, pointing the camera in the wrong place.
—
[snorts]
—
So, I might get rid of the old five-way look.
—
Put the three-way in, and wire it like an Explorer.
—
Oh, dog's barking.
—
Now, it doesn't mean this is going to be a bit ugly,
—
cuz I'm going to have to drill a hole,
—
and I'll have two holes left.
—
But at this point, dog's barking.
—
Um I'm willing to try it, actually.
—
I'm just I've got a wiring diagram from Lindy Fralin that I've just sent to Matt
—
Gleeson to say, "Is this 50's wiring?"
—
Cuz I get so confused.
—
I get so confused.
—
Rosie, what you doing?
—
Rosie here?
—
Here's the spaniel.
—
You helping?
—
Not really. What are you barking at?
—
Hey.
—
Boo.
—
Just check with Matt, the wiring diagram is good.
—
It is 50's wiring.
—
The tone pot has to come after the volume pot.
—
I think. I don't know.
—
I just I can't get this stuff into my head.
—
Right, I don't have a drill big enough to do this.
—
But I do have a countersink.
—
So I can go straight down through there.
—
And as long as I don't go too far,
—
I'll do it from both sides perhaps.
—
That will be the right uh diameter for this.
—
Um The gold is going to go with the knobs and
—
the pickguard and the orange of the guitar.
—
These are the clash point, but that's okay.
—
And it's going to be a bit ugly because we've got holes here that we don't need.
—
If it works, maybe I can get Dean to cut me a new pickguard specifically for
—
this. But um functionality-wise,
—
ease of wiring, and hopefully losing that horrific clunk of the Fender three-way
—
will make this successful.
—
Let's see.
—
Mick and drill hilarity once again.
—
Let's see if we can ask this up then.
—
Ooh.
—
It's a nice cracking noise.
—
[sighs]
—
Great.
—
That's great.
—
[snorts]
—
So, I suppose the thing to test is does it fit in the guitar?
—
Will this width fit in the guitar?
—
Because the switch I want the switch on this orientation,
—
so it makes um makes sense logically.
—
I'm just going to check that it will drop into the guitar and this route is big
—
enough to take it.
—
Uh it doesn't look like it will, which is kind of annoying.
—
The switch won't go in there.
—
Because it won't go in on that orientation,
—
which is a real ballsack.
—
I should have checked this.
—
Looks like I'll be able to get it straight up and down.
—
Gibson style.
—
Not ideal, but we'll go with it.
—
Deja vu?
—
Uh okay. It ain't pretty.
—
I've I've sort of lost the will at this point.
—
Anyway, it's wired up.
—
Going [snorts] to drop it in the guitar and see if it works.
—
Yeah, middle age.
—
It's in.
—
We have the Marshall MS2 of Destiny.
—
Signed by Jim Marshall.
—
Did I say that before?
—
Uh and I've wired up the jack,
—
so we can see if it works.
—
It's the heart-in-mouth moment.
—
Right, bridge pickup.
—
Happy days.
—
Yeah.
—
Tone pot works.
—
Volume pot works.
—
Neck pickup.
—
Volume pot works.
—
Tone pot works. Middle position.
—
They both work.
—
Happy days.
—
Although with 50's wiring, if you've got one turned down,
—
the other one shouldn't work.
—
Maybe I haven't wired it 50's.
—
Oh,
—
mommy.
—
These are not my glasses, but they do help me see.
—
Uh night has fallen on the parish of Guitarwiring-shire.
—
Um I realized what I've done.
—
W- When you're in the mid position on a 50s wired Gibson and you put one of the
—
pickups to zero, it should be silent.
—
And I've realized what I've done, which is those bloody Bourns pots which I was so
—
cock-a-hoop about earlier and how cool they were,
—
I've mixed up lugs two and three, haven't I?
—
Cuz they're arranged weirdly.
—
They're not arranged in a line.
—
And um so I've got lugs two and three the wrong way around for the bridge pickup,
—
so I will swap those.
—
So it's going to all got to come out again.
—
Swap those two over and then hopefully I will have my 50s wired guitar finally.
—
Oh my god, it's Saturday night.
—
What have I done with my life?
—
Why am I wearing these glasses?
—
And so many other questions.
—
As I expected, I don't know if you can see.
—
It's dark, basically.
—
I really hate overhead lights, but anyway.
—
So, bridge pickup,
—
happy days.
—
Neck pickup,
—
Middle position,
—
and if you turn one of them down, like if I turn the neck pickup down now,
—
the bridge pickup won't work.
—
[sighs]
—
As per proper 50s wiring.
—
Going to get it strung up.
—
Um see if it works.
—
Seems to work.
—
Norks and lordy, blimey O'Reilly.
—
Flipping hell.
—
I think I'm happy.
—
Um, I don't know.
—
What? You got to go there to come back?
—
The road of excess leads to the palace of wisdom,
—
maybe.
—
Ironically enough, we're sort of back where we started.
—
Two volumes in one tone.
—
And I'm pleased about that.
—
The main There are two main differences.
—
One is that this volume now controls the bridge pickup.
—
And this one controls the neck pickup.
—
But it's counterintuitive for some people,
—
but it makes sense to me.
—
I just couldn't get a hang of it the other way around.
—
Secondly, we've um replaced the Fender-style blade three-way selector with a
—
Gibson-style one.
—
And it actually clunks a bit less.
—
It still clunks, but it's clunking way less than the than the blade selector.
—
Um and it it It sounds dumb,
—
but just that style of switch puts me in a more Gibson frame of mind,
—
which is what we're dealing with with these pickups.
—
Uh with these parts, but more importantly than that,
—
much more importantly than that,
—
first of all, retain 50's wiring.
—
So, it does I think I felt like it had lost a little bit of brightness going to
—
standard wiring when you turn the volume down.
—
And perhaps most importantly of all,
—
the blend of the two pickups is now variable because in the middle position you can
—
change the relative um volume.
—
And that changes all kinds of things.
—
Let give you a quick demo of that.
—
So, here we are in the mid position,
—
both volumes full up.
—
Maybe relatively subtle with a clean sound,
—
but as you pile gain on those differences are marked and you can just sort of sit it
—
in in the right place for the amount of vocal quack in that mid position.
—
After that, um, full out bridge pickup.
—
Oh, yeah. You can have a quick look at that.
—
That's the story for another day.
—
Um hopefully what you can hear is the neck pickup retains good amount of clarity
—
thanks to that 50s wiring and also I haven't mentioned this in the whole video.
—
The reason we put it back here a bit um is so that it's a bit clearer.
—
I've always struggled with neck pickups that are right against the the end of the
—
fingerboard.
—
Um I don't know what really what much else there is to say.
—
I'm really happy with it.
—
Um Something I was messing around with earlier
—
maybe.
—
Uh
—
It's done.
—
I'm happy.
—
And if that was as painful to watch as it was to make,
—
I don't blame you for turning off.
—
It's done. It's a great, great, great guitar.
—
Dean, thank you so much.
—
Matt Montys, thank you so much.
—
Took me a minute to just find my feet,
—
but I'm expect to see a lot more of it on that pedal
—
show.
—
Despite the seemingly minute variation from what you would
—
consider as the classic Fender Stratocaster design,
—
you know, it ain't a fan fret Kiesel,
—
right? It's not uh one of those things,
—
Strandberg. It's not that.
—
It's not a Parker Fly.
—
It's not a Teuffel Birdfish.
—
Um what it is is far enough away from what I know uh enough to drag me
—
away from what I know.
—
And that's good because I think that's what starts to pull us in the direction of
—
that voice that I talked about earlier,
—
that little voice in the back of your head that is somewhere uniquely you,
—
rather than trying to emulate, you know,
—
in my case Landau, Stevie Ray.
—
You know, it it's all part of the cake,
—
isn't it? It's all part of how you sound,
—
but perhaps perhaps if you take the time,
—
if you let the guitar direct you a little bit,
—
and you're brave enough, we'll see.
—
Um you start to appear in the mix,
—
which hopefully is what we're all after at some point down the line.
—
Anyway, um I want to say massive thanks to Dean for being so
—
understanding,
—
for also understanding that I take years to do anything,
—
whereas he's like, "Come on, come on,
—
come on." And I'm like, "Oh god.
—
Oh god." Um I'm I'm a bit of a slow operator in that respect.
—
Um And obviously I wish Dean all the best in his um in his guitar making from this
—
point forward. Thank you for watching That Pedal Show.
—
Uh we really appreciate it.
—
Thank you to our patrons on Patreon.
—
Please go to that pedal show store and buy stuff.
—
Uh guitar hero polo shirt in stock now.
—
And um, yeah, we'll see how it unfolds.
—
I'm excited. I'm excited.
—
See you soon.
—
More in this topic
VideoMake a Darkglass Anagram patch in less than 60 seconds! 🔥 #shorts #guitars #darkglassAndertons Music Co (YouTube)
VideoEric Gales: When Guitar Inspiration Takes OverTrueFire (YouTube)
VideoFoo Fighters “The Pretender” quick breakdown #guitar #foofightersRick Beato (YouTube)
VideoEric Gales Learned His First Guitar Song in 24 HoursEric Gales was only four or five years old when his brother gave him a challenge: learn a song on guitar by the next day. The reward? A trip to a favorite local restaurant known for its enormous burgers and great ice cream. Eric took the challenge seriously and learned the song within 24 hours, surprising his brother and showing just how determined he already was to play guitar. In this TrueFire excerpt, Eric also reflects on the wide range of music his brother introduced him to growing up, fromTrueFire (YouTube)