Guitar CampusOnline
beta

Beta version of the platform

The portal is still growing: sections are launched one by one, some things keep changing and some features stay hidden until they are ready. It will get more interesting. For now you can subscribe to our Telegram channel to follow the news.

Subscribe to @jazzguitarcampus
Treble Bleed Vs 50s Wiring In Your Guitar With Simon Jarrett [And New Kingsley Pedals!] · Watch on YouTube →
Subtitles:
—
Gear & luthiery

Source: That Pedal Show (YouTube)

Watch on YouTube →
Gear & luthiery

Treble Bleed Vs 50s Wiring In Your Guitar With Simon Jarrett [And New Kingsley Pedals!]

6 November 2026 · Source: That Pedal Show (YouTube)

Two of our guitars go under the knife in the pursuit of better clean up tones Welcome to the show. Today we welcome back our great friend, electronics force of nature and truly wonderful guitar player, Simon Jarrett. Simon is behind the Kingsley brand, whose pedals we’ve used and featured on That Pedal Show from the very beginning. In this show we continue a discussion from the last time Simon was here, which is the specific interaction of the guitar’s electronics and controls, with your pedals

Video transcriptauto-generated captions · EN · RU

Click a timecode to jump to that moment in the video

Original (EN)
Translation (RU)

Hey everyone, welcome to That Pedal Show.

Hey everyone, welcome to That Pedal Show. Dan here. Mick here. And Simon here. Yay! The wonderful Mr. Simon Jarrett, friend of the back again for more fun and uh Noisy experimentation. beautiful. Um regular viewers of That Pedal Show,

Dan here.

please subscribe by the way, and please go to That Pedal Show store and buy merch. We greatly appreciate it. way we fund this show. Um regular viewers of the show will know Simon has been on the show now many times. We're very pleased to see him.

Mick here.

times. Keep bugging these guys and they keep having me back. And every time Simon comes, he schools us, uh reminds us a what fantastic guitar tone is, and we delve into ways in which we can find it. The last time Simon was with us, we looked at stuff like different value

And

capacitors and '50s wiring in Gibson guitars specifically or Gibson-style guitars Yeah. as a way to increase your kind of tonal palette from the guitar itself. Interacting with this stuff, but kind of before we get to it.

Simon here.

And on this occasion, we're going to continue that discussion and have a look specifically at treble bleeds as one big part of it because Dan and I have often said, right, here's the problem. A guitar that is not '50s wired, and we'll get into that in a sec,

Yay!

um and we'll demonstrate in a sec with one of my guitars, when you turn the volume down, it goes dark. Right. And the reasons for that are many and varied. They are indeed, yeah. Yeah, I mean the guitar is a sort of a system is part of a system.

The wonderful Mr.

You've got your guitar which plugs in with a cable into your amp or into a pedal. And the um electronic properties of both the pickups, the pots, the capacitors for the tone pots, the wire even inside, whether it's shielded or not, the shielded cable itself has a capacitance,

Simon Jarrett, friend of the back again for more fun and

and the length of that makes a difference to that, and that interacts with the input impedance of the amp. Are you saying that everything matters? Surely not. Yeah, everything matters, yeah. But it's all a system, right?

uh

So it's not like you can't like take the pickup on its own and say this does that. It's part of a system, right? Yes. And so the thing about electric guitar tone is, and I may have mentioned this before with you guys,

Noisy experimentation.

is one of the fundamental things about the properties of an electric guitar pickup in this system is it develops uh what's known as a resonant peak. Yes. And that delivers um a lot of the character of the particular guitar and pickup in this system. Mhm.

beautiful.

And uh humbucking humbucking pickups in general have a resonant peak that occurs at a slightly lower frequency as opposed to compared to say single coils like Strats and Teles. The resonant peak occurs at a higher frequency and is also at a higher

Um regular viewers of That Pedal Show,

level. There's a there's a higher Q. Right. And uh how that uh resonant peak changes when you lower the volume pot is key. Okay. As soon as you roll down the volume pot, what's happening is you're introducing a series resistance Yes. in between the pickups Mhm.

please subscribe by the way, and please go to That Pedal Show store and buy merch.

um and your cable and the amp or the pedal. And that series resistance, what it does is it uh it basically creates a low pass filter. There's it's a complicated mechanism, but the pickup itself is a big inductor,

We greatly appreciate it.

right? So you you get a filter between the inductance of the pickup and this series resistance forming a low pass filter. And then you get there's a low pass filter between um that series resistance created by turning down and the capacitance of the cable. Yeah.

way we fund this show.

So this the cable from the guitar to whatever you're plugging into will have the biggest uh bearing as far as cables are concerned like compared to the cable going from your pedal board to your amp because generally that's buffered, so that can be

Um regular viewers of the show will know Simon has been on the show now many times.

The first cable is so vital, right? Right. And cables are important, of course, um but the real one that matters is that first cable, okay? And that's largely because of its capacitance. Okay? And so one better way to get clean up or to have it go less dark,

We're very pleased to see him.

um, the resonant peak gets killed really quickly when you roll that down and introduce a series resistance. Yep. Uh, that low pass filter in conjunction with this capacitance is what does that, or a large part of it. So if you use a lower capacitance cable or a shorter cable,

times. Keep bugging these guys and they keep having me back.

all of a sudden, uh, then the effect is that the resonant peak uh, doesn't uh, shift downwards in frequency as much. Yeah. Okay. So you've got two things with this resonant frequency. You've got where it occurs on the frequency spectrum,

And every time Simon comes, he schools us,

and then you've got the height or the Q factor, right? Yep. So the capacitance to ground of the system uh, affects the height, not the height, sorry, the frequency of where that occurs. Okay. And the impedance, or the source the the load impedance on the pickup,

uh reminds us a what fantastic guitar tone is,

that affects the height of that peak. So if we think of that, if we think of that um, that resonant peak, I mean, it's a poor example, but we think of it like a wah pedal. So what we're doing is we're well like even with a wah pedal where we're sweeping that frequency, Yeah.

and we delve into ways in which we can find it.

we're not I think a lot of people think, well, it's like a tone control where we're just making it darker. Actually, what we're doing is we're moving where the energy is in the resonant peak further down the frequency spectrum. And that is what's when we roll off the volume,

The last time Simon was with us, we looked at stuff like different value

we're introducing that series resistance, and that is what's affecting the the resonant peak. So um, yeah. Well, rolling off the volume actually kills the resonant peak. Okay? The resonant peak actually disappears very quickly. So

capacitors and '50s wiring in Gibson guitars specifically or Gibson-style guitars

The what you notice most obviously is a notable loss of high end. And that's, you know, back on planet Earth just for a second, the the problem is or at least the problem as we perceive it. And it's important to say at this point, if this is what you want,

Yeah.

you guys turn the volume up to 10, snap it off 10 across the board into your Marshall, Yeah. this isn't a problem that that you're going deal with. Also, there've been plenty of players down the years who have used like a coily

as a way to increase your kind of tonal palette from the guitar

cable or a really long cable to do the opposite thing. So, it's really important in the caveat of if it's what you want. And the important bit about that is we've got two guitars today that to a lesser or greater extent exhibit the problem.

itself.

Now, guitar number one, sorry to cut across you just for a second. The Cutler which I recently had made is not 50s wired, standard wired. And it really really does go dark when you when you turn. So, we'll we'll we'll demonstrate that in a sec.

Interacting with this stuff, but kind of before we get to it.

And Dan's Lester, we're going to demonstrate a couple of other a couple of other ways around the problem. But just to say if you the obvious answer when we say oh I turn my volume down Okay, it's down to nine or two. Yep.

And on this occasion, we're going to continue that discussion and have a look

the chorus from the uh that Pedal Show comment section is fit a treble bleed. Mm. Yep. So, we're going to do that today. But Dan and I normally reply we hate treble bleeds. Yeah. It's that it's the thing where it's like when I hear Andy Timmons' clean

specifically at treble bleeds as one big part of it because Dan and I have often

tone that into his Blues Driver which is cranked, right? Yeah. And it's the most glorious clean tone. Now, he he uses a treble bleed and it works for him. I think with Mick and myself where we're using fuzzes Exactly. Yeah. that treble bleed turns into a an ice pick in the ear.

said, right, here's the problem.

It just it it's really harsh. And I think the way that we set up our gain stages we're on the volume a lot, right? So, we will set up the gain stages so that it sounds good at 10 but also sounds good at nine, you know? So, we find that sort of middle ground,

A guitar that is not '50s wired, and we'll get into that in a sec,

the compromise where where we're quite flexible on the volume thing. What we find is with the way that we use our gain stages that treble bleeds are too I don't know. There's too much uh it's it's too harsh.

um and we'll demonstrate in a sec with one of my guitars,

There's a harshness to it that we with the way that we play and the pedals that we use, it just doesn't seem to work. Okay. So yeah, there's there's a few comments to make about the whole treble bleed situation.

when you turn the volume down, it goes dark.

So probably a lot of guys who are first introduced to treble bleeds uh perhaps they use a capacitor which is too big. So uh basically you put a capacitor across lugs one and two of your volume pot Yeah. and this capacitor bypasses that series resistance I was just talking about.

Right.

So it's like a bright cap in the It's like a bright cap in an amp, yeah. It's across one pins one and two. Um and uh if you use say a thousand picofarad cap Mm. uh what will happen is yeah, it'll get it'll keep brightness,

And the reasons for that are many and varied.

but as you continue to roll down, it'll get even brighter and you'll lose low end and it'll be thin and harsh. Yeah. Okay? So well, couple of potential solutions. One is to use a much smaller cap Right. uh and for example uh PRS I think use a 180 picofarad cap.

They are indeed, yeah.

It's a lot smaller. And I think you've probably got one in that in your DGT, probably. I have one guitar that has a treble bleed in it that I have never wanted to take out. Right. There you go. So It's more subtle. Yeah. Yeah, yeah. So when you use a really small cap,

Yeah, I mean the guitar is a sort of a system is part of a system.

you're bypassing just the really high frequencies across that series resistance. Yeah. So when you say bypassing, you're just to lay it out you're if you think of your volume control, that dictates how much of the signal from this is going to the

You've got your guitar which plugs in with a cable into your amp or into a pedal.

output. Putting that cap across says okay, I'm going to let this frequency through no matter what is going on with the volume control, right? it's an interactive process because it does matter where the volume control set because as you change the volume setting,

And the um electronic properties of both the pickups,

that series R changes too, right? Yes, okay. any particular capacitor and resistor in parallel you know, if you change the resistor, you change that relationship. okay. Okay. so for example, if you use a small cap to bypass,

the pots, the capacitors for the tone pots,

this is what happens, you know, you find a value cap and you say, okay, I'm going to try that, and you turn it down to say eight or seven, you go, oh, that's actually pretty good. But if you continue turning down, Yeah. then Okay. the capacitor is bypassing a larger resistor,

the wire even inside, whether it's shielded or not,

and we hear that we hear more effect. Okay? So, it really depends on how much do you want to turn down. Are you turning down with a clean sound? Are you turning down with the dirty sounds? You know, so all that is really important. And we can change the value of that capacitor,

the shielded cable itself has a capacitance,

but it's always a compromise because it won't be a linear relationship. It never is. Okay? Yep. And there are ways around it by using series or parallel resistors to help, but they're always a compromise. But that's basically like the Andy Timmons setup,

and the length of that makes a difference to that,

I believe, if I've got it right. It's like a 1,000 picofarad capacitor, but it's in series with a 150k resistor. Right. And that series resistor limits the big effect that that 1,000 picofarad cap has. Got it. And we're going to do that in a minute, aren't we?

and that interacts with the input impedance of the amp.

We are. Yeah, we are. So, practical examples then. That's a lot of electronics stuff straight off the bat for those of you who may be um uh get a bit lost with those explanations. Let's talk about it in practical terms. We're going to mod two guitars today,

Are you saying that everything matters?

so you're about to hear some sounds. Simon's then going to rewire both guitars, or at least modify the wiring in both guitars, and we'll come back and we'll compare the sounds that we got. Example number one, my new Cutler. Yes. Right.

Surely not.

So, I'll try and do this as briefly as I dare. Um on experienced days, when I do this with my my old Strat, I'll explain to people that when I go straight into the amp and play with the volume up full,

Yeah, everything matters, yeah.

the sound, this guitar actually just exacerbate things is quite dark sounding once we get up towards the neck pickup. Right. Volume up full, straight into the amps with no pedals because there's no buffers anywhere here is as bright as I like it.

But it's all a system, right?

The second I turn it down it goes dull, right? Check it out.

So it's not like you can't like take the pickup on its own and say this does that.

So you hear how you lose a huge amount of top end, guitar straight into the amp for all the reasons Simon um explained in the beginning. Now the way I get around that is I'll use a clean boost which buffers the signal. I won't bother with a clean boost.

It's part of a system, right?

I'll just turn a buffer on and listen to the difference this makes, okay?

Yes.

Solve number one, introduce a buffer. At the start of the signal chain. So what we're going to test in a second is if our treble bleed mod Mhm. matches that. Okay? Yep. So I just need to write that down.

And so the thing about electric guitar tone is,

Um just before we get to the Les Paul and I'm going to try and keep the examples as simple as possible. Don't worry, Simon is going to play again before the end of the video. But I'll try and keep the examples as simple as possible so you can really hear what's going on.

and I may have mentioned this before with you guys,

If I now add an overdrive pedal the effect is slightly less because it's the buffer from the overdrive pedal is there but it's still definitely darkens off a little bit. So um Simon's brought Minstrel version three in today. Maybe we could dial that in as how we had it before.

is one of the fundamental things about the properties of an electric guitar pickup

I use the bridge pickup and I'll just do the a similar thing.

in this system is it develops uh what's known as a resonant peak.

Bit more subtle. but but definitely still there. Yeah. Yeah, of course. And is and is that that's because we're not hitting the input of the valve pedal with with a buffer. We're hitting the like there's a relationship now between the input of the pedal Mhm. and the guitar.

Yes.

Absolutely, yeah. Right, okay. Yeah, the input of the pedal has an input impedance Yep. and there'll be a certain amount of capacitance at the input of the pedal to ground. So there's something called Miller capacitance, which is the effect that a valve has.

And that delivers um a lot of the character of the particular guitar and pickup in

There's like capacitance in between the electrodes within the valve and that gets amplified by the amplification factor of the valve. So you might have like about 100 picofarad of capacitance right at the input of the effect, Oh, wow. right?

this system.

Because of the particular valve you're using. Yeah, like a 12AX7 typically you know when it's set up as a regular gain stage have about 100 picofarad of capacitance to ground. Okay. you know that's going to form a low pass filter with that that series resistance,

Mhm.

right? And if you put a buffer um then that takes away the effect of that capacitor. Right. Okay. So it eliminates that. It doesn't eliminate the effect of the first cable though cuz the buffer's after the

And uh humbucking humbucking pickups in general have a resonant peak that occurs at

cable, right? But it does affect what the input of the amp or the pedal reacts to your guitar. Okay. So why is it then that going into uh an overdrive pedal like the minstrel the without a treble bleed it goes darker, but with a fuzz when you roll it back it stays brighter.

a slightly lower frequency as opposed to compared to say single coils like Strats

Well, okay. Um there's different fuzz designs, but if we take say a classic uh like the classic fuzz face circuit, which that isn't, um it has a very low input impedance, very low, okay? So right from the get-go it kills the resonant peak that we were talking about

and Teles. The resonant peak occurs at a higher frequency and is also at a higher

immediately, okay? But because it's high gain fuzz, it generates tons of high harmonics, okay? Tons and tons of them, right? Yes. And if you put a buffer before a fuzz, you know what you get, right? It sounds incredibly harsh. That's all those high harmonics untamed. Okay.

level. There's a there's a higher Q.

But by killing the the resonant peak by having such a low input impedance, you're basically EQing the signal at the beginning of the circuit. Yes. Okay. As opposed to, you know, in a lot of most overdrive circuits and amps, there's EQing in in you know along the way,

Right.

especially at the end there'll be some kind of filtering device. In the fuzz, the filtering's all at the beginning, mostly, pretty much all at the beginning. But as soon as you turn your volume down, it's kind of interesting and this is a little bit complicated,

And uh how that uh resonant peak changes when you lower the

but when you turn the volume down uh the the pickup now sees that series resistance Mhm. as being added to the input impedance of the device. So your input impedance as far as the pickup sees it actually goes up. Right. So that allows uh some uh resonant peak to come back in,

volume pot is key.

okay? And what that and what retains our top end. and that brings back top end, especially as there is so much top end in the fuzz circuit. You just don't know it because it's all tamed at the input. Okay. Here we go. Okay. Um before we start delving in with the soldering iron,

Okay.

let's dial up some sounds on the Lester. This is not nuanced, right? Because it is it is the telly and you play a bit. It is currently wired fifties. And the mod that Simon's going to do to this uh guitar is to allow us to compare fifties and modern wiring, modern.

As soon as you roll down the volume pot,

And it's also going to allow us to compare a treble bleed and no treble bleed. That's the plan, you know? The one tone pot will be replaced with a push-pull pot, which will activate the treble Mhm. And the that treble bleed will affect both pickups.

what's happening is you're introducing a series resistance

And then the other push-pull pot will uh toggle between modern and fifties wiring, so you could listen to either or both. Yeah. Amazing. Right. Dan? Yes, mate. Um we just need to come up with some sounds. Well, let's let's start with the the straight clean tone from the neck.

Yes.

So this is the neck on full.

in between the pickups

The most notable thing for me is that thud Yep. on the start of the note when you when the guitar's turned down. Okay. Mhm. You have a very specific problem with neck humbuckers, don't you? I do. And which is But it's just so bloated. Yeah. It's so bloated.

Mhm.

It's like a six beers and a curry on a Friday night after a long week and then you regret being alive. So shall we introduce some overdrive and see how we can get on with that then, Dan? yep. I'm going to the minstrel. And the TS into the minstrel sounded pretty good earlier.

um and your cable and the amp or the pedal.

Let's go let's cuz you use more gain than I use. All right. Is that what you had earlier, Simon? did the Rogue into minstrel but I did the Rogue into the TS actually sounded really good too. But yeah do any combination. with it. There we go. All right, so neck pickup again.

And that series resistance, what it does is it uh it

Am I hearing that changing resonant peak then? Cuz it definitely went from thick and fat and full to more fluty for want of a better description. Yeah. Yeah, absolutely. One one thing we should mention though is that Dan's guitar is currently 50s wired. Okay?

basically creates a low pass filter.

So I guess we'll hear it modern wired after after we get back. But yeah it's I mean it still sounds good but it does have that it's still got kind of a tubby low end, Yeah. right? The the issue that I've got, right? Is that if I play that same sound on the bridge pickup, Yeah.

There's it's a complicated mechanism,

it would just rock like no one else's business, and it's tight. Okay? So,

but the pickup itself is a big inductor,

you. But now I want to go to the neck.

right? So you you get a filter between the inductance of the pickup and this series

Well, it's that thing where it sounds Bridge pickup sounds great down here, but to make this usable, I don't go near this until I'm up to C sharp up here. That's a different problem though, that's

resistance forming a low pass filter.

But there's But there's It's that low end thing that down here if I if I play power chords on the G because I And again, I hit quite hard, and it has that thing. It's like if I set up the sound so it sounds rocking on the bridge pickup,

And then you get there's a low pass filter between um that series resistance created

as soon as I go to the neck pickup down lower, it's just It's unusable for me. So, Can we scoop out more? Okay. Let's get wiring then, and um we'll explore some of these sounds in more detail, and it'll make more sense when we come back because the direct comparison's

by turning down and the capacitance of the cable.

going to be there. So uh Yeah, yeah, yeah. Let's do that. Here we are then, as promised, Simon in situ in the common room, complete with guitar cavity, soldering apparatus, and new fandangled bits of electronic gadgetry.

Yeah.

You can explain to us what you've done with that in a second, but you've already fitted the treble bleed? Yeah, I got the treble bleeds ready in place just to make the process a touch quicker. It's not quite finished, but yeah. And that's the combination resistor and capacitor?

So this the cable from the guitar

Yeah, this is a resistor and a capacitor, and uh the the resistor can be varied, so we can hear the effect of different resistances, if you like. We will, of course we like. Look at that. Killer. All right. We're going to leave Simon to it.

to whatever you're plugging into will have the biggest uh bearing as

Um I'll probably just leave the overhead camera on. Um but yeah. Uh Interesting. Okay. Back in a moment. Super.

far as cables are concerned like compared to the cable going from your pedal board

We're at that heart-in-mouth moment, Simon, where you've done a load of wiring to the guitar, and we're testing it. That's right. Have you got it Have you got it right first time? Well, let's see. I mean, this is stock with the pots down. And you hear it gets darker.

to your amp because generally that's buffered,

So this is the treble bleed, so if it works There it is, right? Let's check on the uh neck pickup. So This is the '50s Modern. This will be interesting. Now to to hear the difference, we need to roll down Oh yeah. Get out of town.

so that can be

There you go. One thing you notice with the '50s is it drops a lot more volume. Yeah, yeah, yeah, yeah. Right? But that's part of the deal. Okay. On to guitar two, Simon. Mhm. Uh it would make most sense to change this pot Yeah. and make this the push-pull pot.

The first cable is so vital, right?

Great. The middle one. Yeah, because it's closer to the volume, right? So that way the components can just go straight across. Yeah. It's always slightly slightly scary showing your wiring to someone like you, Simon.

Right.

No, not at all. Well, just don't look in the back of Dan's guitar, okay? Um Simon is soldering all day, every day. Uh pretty much. I uh except that I do have two workers, so I have to check over all their work. So I I make usually one pedal a day.

And cables are important, of course,

Those guys make two, but then I have to take care of them and the rest of the business, right? As Dan gently learns the Hotel California guitar solo, Simon is coming to the end of Please Don't Sue Us Don Don

um but the real one that matters is that first cable,

Henley. Simon's come to the end of the wiring on on the Cutler and you have some information to impart. This trim pot here Yeah. is set to be right now it's a 300K trim pot. Right. I've set it to 150K. Okay.

okay? And that's largely because of its capacitance.

When you if you open this and you want to change it you need to measure the resistance between these two lugs. The only lugs that are being used. I've chopped the other lug off. Okay. And then if you turn clockwise the resistance goes up and anticlockwise the

Okay? And so one better way to get clean up or to have it go less dark,

resistance goes down. So that's about it. And we can discuss the effect of that when we go and plug in in a minute. Yeah. So amazing. So I now have a push pull treble pot Yeah. and we'll explain this in the other room,

um, the resonant peak gets killed really quickly when you roll that down and

but I decided that it made sense for the the treble bleed to be active with the knob in the down position. Yes. So in its standard position That's right. which is a bit of a risk for me. Amazing. Do you think we should test it before we put the screws back in?

introduce a series resistance.

Sure. We could put just one or two in and Back in the room. Well well as the little bit of cutting will tell both guitars have been modified. So prosaically let's just go through the sounds that we had, okay, before and then we can do some more interesting stuff after that.

Yep.

So Simon has modded the Cutler so that the treble bleed, which is what I asked him could be in the down position That right. the standard position will be the treble bleed sound. Yeah. So which means as it was the pot will be pulled up That's right. Right.

Uh, that low pass filter in conjunction with this capacitance is what does that,

And we'll see if my sound Cutler no pedals neck pickup 10 and nine. Okay. I think I played in B. But, who knows? I know I played.

or a large part of it.

It's clearly having an effect on the neck pickup. The next one was the Minstrel. And I tried uh the neck pickup to start with, if you remember. So,

So if you use a lower capacitance cable or a shorter cable,

So that's carving out Feels like it's carving out some lower mids as well. Would that I mean, this particular combination of resistor and cap, as I say, as you turn down the volume, it's going to constantly Whatever you put in there,

all of a sudden, uh, then the effect is that the resonant peak uh,

it's going to constantly be having a different effect from like nine, eight, seven, six. So we'll go on the bridge pickup. go lower down and see what it does. Oh yeah, sure. the bridge, yeah. Just work on the bridge pickup. No treble bleed.

doesn't uh, shift downwards in frequency as much.

So there's two things that has changed in Daniel's guitar. One is he's gone from 50s wiring. Well, you've got the option of 50s or modern wiring. Mhm. Diagram on screen. And the second is you've got the treble bleed or not. So Yes. What shall we hear first?

Yeah.

I want to hear the 50s. 50s wiring. So the 50s wiring is Well, I think it was this one. The 50s wiring is that one. I'm pretty sure. So with it down, it's modern, and with it up is 50s. That's correct. Right. Okay. So modern first and All right. So

Okay. So you've got two things with this resonant frequency.

And it will only have any effect if the volume is turned down a bit. If the volume and tone are both on 10, there's no difference cuz the wiper and and pin one are shorted. So there's no difference. Right. Okay. So it maybe play it full out, come back to eight,

You've got where it occurs on the frequency spectrum,

which is where you were. Okay. And then engage the 50s wiring. Okay. So

and then you've got the height or the Q factor,

Did you put it back? I I know I've just I've just want make sure there's no difference. So 50s or modern wiring doesn't matter when up full. As long as the volume and the tone are both up full, Yep. then it's In fact, as long as the volume's up full, it makes no difference.

right?

Okay.

Yep.

Subtle difference now. Yeah, yeah. But I can I can I just want to mention something. Yep. Right now your tone's on at max, right? Yeah. It comes into its own when the tone pot is rolled back to On in 50s wiring. Oh, okay.

So the capacitance to ground of the system uh,

you don't wire the tone pot back, it's a subtle difference, right? Okay. So you have to have the tone pot low and then lower the volume and then go between 50s and modern and see the difference.

affects the height, not the height,

So now That's amazing. Keep those exact settings. Going to pile loads of gain on. Yeah. Okay. Yeah. Cuz what we did is we had

sorry, the frequency of where that occurs.

That's just that's not even a treble bleed. That's just 50s wiring. That's amazing. And now do the thing that you never ever ever do. Put the volume on three.

Okay.

Can I mention one thing about that? Mhm. We were hearing a big difference between modern and fifties wiring, but then Mick you reached over and you turned on the Rogue. Now what the fuzz does though is it does its own thing. Yeah.

And the impedance, or the source the the load impedance on the pickup,

So I don't think that with the fuzz you need to go to fifties wiring. Okay. Right? You can keep it in modern wiring and fuzz works great. Yeah, okay. It cleans up already. You can do both if you want. Right. But it's more the point when you're not using fuzz I think.

that affects the height of that peak.

the reason I did it was to put on so much gain Yeah. That then actually down to two on the guitar, which might have confused matters a little bit, but down to two on the guitar is a totally usable sound for four-pot Gibson which you'd never go Never.

So if we think of that, if we think of that um,

anywhere near. Like I could see you like turning the volume down like you were scared to go past seven. Yeah. It's like no no no. just would die. Keep going but it doesn't die. No, that's amazing. And that's just fifties wiring.

that resonant peak, I mean, it's a poor example,

Okay. So now the treble bleed, now the treble bleed, right? So if we keep it on modern for now Yeah, keep it on modern. All right. So I'm going to turn the treble bleed on. Again with the the time pot all the way up it'll make no differ Now on a dial

but we think of it like a wah pedal.

Sorry Simon, you were going to say? Well, no I I mean nothing really. Just maybe just hear it with some gain. Yeah, yeah. That's what I was going to do. So stick it in Modern? modern again. Yeah. And now um going to put lots of gain on and just see how much usable

So what we're doing is we're well like even with a wah pedal where we're sweeping

clean that gives you with lots of gain. ALL RIGHT.

that frequency,

LITERALLY unlocked sounds I've never had before in this guitar. Now put the 50s wiring in as well with that same sound. Okay.

Yeah.

Just for context, just go all out on the bridge pickup a minute, can you? Yeah. Uh was the TS9 on? Yes. Yeah, it was.

we're not I think a lot of people think,

One one thing I'd mention is that because of all those sounds you were playing with were with both the TS9 and the Minstrel. The TS9, of course, it lops off a whole lot of bottom end at the beginning, right? And so that combined with your treble bleed or your 50s wiring,

well, it's like a tone control where we're just making it darker.

you know, maybe that's too much, you know? So it's it's all, you know, and you need to take the time to dial it in on the guitar. Like where do you set that tone pot? For 50s wiring there's a huge range. I love this. I'm leaving this I mean this is this guitar now.

Actually, what we're doing is we're moving where the energy is in the resonant peak

This is how this guitar looks now. versatile. It's so cool. Yeah. Are you Simon Dan, do you want to try anything else? My questions have been answered. I'm good to go. I would just want to hear Simon play. Yeah, and and just to finish us off,

further down the frequency spectrum.

we've got Minstrel version 3 on the board which we haven't seen before and the Rogue Valve Valve Fuzz which you've heard a little bit through the video. You could maybe play a bit, Simon, and show us some sounds in them. How does that feel? With the with the new a newly modded

And that is what's when we roll off the volume,

Yeah. with with 50s wiring and a push-pull and treble boost on the push-pull. treble There you go. Here we go sound. you Well, 50s wiring we knew about, but hearing it side to side is nuts. It's nuts. I had no idea that it would make that much difference.

we're introducing that series resistance,

You know, I wanted to say something about the 50s one. You noticed Did you notice when you went when we rolled the volume and the tone back and you went between the two, one of the side effects of 50s wiring is that when you roll the tone down it acts more like a volume control.

and that is what's affecting the the resonant peak.

Yeah. So it actually takes the volume So some people don't like it for that because it's like you rolled back the tone and your volume gets lower. So perhaps for clean tones it's not as useful for some people because of that. Yeah, but the but there was top the top end regained.

So um,

It It was like an almost like an acoustic guitar. It was amazing. But but what he is about to say When you add gain, what happens? You're compressing the signal and those weaker signals are louder anyway. okay. So 50 So if you're playing into a gainy amp, 50s wiring really makes

yeah.

Right. Because the gain is compensating for the fact that that the taper has changed, right? Yeah. So, you're essentially way putting headroom back into your amp because you're pulling out a bunch of that low-mid frequency or you're you're actually reducing the volume. Yeah.

Well, rolling off the volume actually kills the resonant peak.

And that is your amp which is really squashing and overdriving heavily squashes less. And actually the difference in volume would be much less noticeable. Yeah. Which is why all our favorite players or all our favorite Gibson players of a certain period had the '50s wiring,

Okay? The resonant peak actually disappears very quickly.

right? Yeah, especially the old school guys who plugged straight in the amp or had a simple setup, you know? It's cool for that. Yeah. It is fascinating. yeah. There we go. Um Tone adventure. Amazing. I need a cable. You need the uh driving device on. cable gosh.

So

Maybe you could show us some sounds in here that you particularly like. Okay.

The what you notice most obviously is a notable loss of high end.

I mean, is that too much reverb for you? Uh not for me, but if it sounds amazing I mean, I didn't tweak anything, but that sounded pretty decent right there really. Uh just very briefly, the mode switch,

And that's, you know, back on planet Earth just for a second,

if you put it down, it's a lower gain mode and it's a little bit leaner and a little bit smoother on the top end.

the the problem is or at least the problem as we perceive it.

And with the uh with the mid control, you know, you can get It's got quite powerful mids if you want to get thick.

And it's important to say at this point,

More more gain, more girth, a bit more edge. So it's kind of a mid gain, quite rocky, yeah, yeah. And uh this is what I would call the Minstrel version three B. I've added a new mode here. If we up the gain a bit, this actually will get quite aggressive because it puts a

if this is what you want,

big bright cap across the gain pot. So so it's still got some girth, but it's got this attack on the top end, right? Um that is amazing. So that's uh yeah, that's the Minstrel.

you guys turn the volume up to 10,

It's a very popular pedal for us, but I know that you guys never really have spent a lot of time with it, so I'll just leave it with you guys to see what you think. I can see that getting a bit of use. Oh yeah. Yeah, wow. And you've got it there's a new V three page coming out,

snap it off

is that right? That's right. There's a V three page. I'll just grab it. It is out. Yeah, people have got this already. So it's just like the V two, Yep. except it adds uh a lows pot in place of the lows mini toggle. Okay. Ah, okay.

10 across the board

And so it's constantly variable, which just means you can fine tune the low end content. Yeah, because if you don't like the if you if you want between, you now have between. Yeah, yeah, yeah. Plus like some of our other pedals, like the uh peasant and the artisan,

into your Marshall,

this also doubles as an input impedance control. Okay. So lowering it not only gives you less low end, it also takes you more into mid range territory because you get this the lowering of the impedance again takes down the resonant peak. Yes, okay. off some top end as well.

Yeah.

So that's this and there's a new third mode which gives you a smidge more gain. Might need a second just to uh Yeah. Yeah, it's got to warm up. a little bit. Yeah.

this isn't a problem that that you're going deal with.

That's the same that's mode two. It's just an an edge, you know, a little bit of edge just to get to that edge of breakup point that you might get from turning up an amp a bit, you know. beautiful. past the edge of breakup. Okay.

Also, there've been plenty of players down the years who have used like a coily

I mean those tones honestly are in Page version two very much, right? Yeah. Um except for just being able to nail dial that really nicely in. And then the new mode adds a little bit just a smidge extra gain, not a lot. It's not capable of much,

cable or a really long cable to do the opposite thing.

but sometimes guys have pages and they go, you know what, is there a pedal you have that does that but just a little bit more? Yeah, yeah. So this gives you that little more and introduces a bit more mid-range.

So, it's really important in the caveat of if it's what you want.

Um, yeah. That's so good. Big boy sounds today. So that's Yeah, that's the page version three. Um, boy sounds today. And uh I finally, you know, after all this 50s and and and all that and treble bleed, everything's just Everything's Everything's just so right now, you know.

And the important bit about that is we've got two guitars today

Yeah, yeah. It sounds amazing. Can I just hear the Rogue quickly with with the old Stratoblaster? Yes. Explain to me, Simon, the voice thing again. Sure. Well, first of all, if you would play with your volume full up, I'll show you what it does through the range.

that to a lesser or greater extent exhibit the problem.

And then we'll try again with your volume down because it's really mostly about fine tuning the cleaned up sound. Okay. But it also has an effect on the full up sound, but less so.

Now, guitar number one, sorry to cut across you just for a second.

So one thing I should mention is as you noticed when you clean up with a guitar like the Strat with a fuzz pedal, it can get kind of spiky, you know, the cleanup can be too much mid scoop and too much upper shimmery stuff that gets a little harsh. It's yeah,

The Cutler which I recently had made is not 50s wired,

So here you can kind of dial that out a bit by going that way. yeah. Um maybe before you stop there, Mick, what we should also do is do that again, but do it going into something that's just a little bit driven already. Right.

standard wired.

'Cause that will take some of that edginess off it as well, right? So if we set this up, um that's this one, isn't it? Mhm. So if you let's just set that up

And it really really does go dark when you when you turn.

So depending on how much cleanup you want with the gain set and the kind of guitar like with this guitar when you roll down it just won't be as shimmery in that cleanup right yeah to have that to have control of that because that's what we want right with our

So, we'll we'll we'll demonstrate that in a sec.

that's why I did it with the strap was because Yeah I want when I step on my fuzz for it to go shimmery like we like we love so to have control over it is is cool man Yeah yeah Good okay we covered a lot of ground today um I

And Dan's Lester, we're going to demonstrate a couple of other a couple of other

guess the coming weeks and months will be interesting to see how much we use our treble bleed um and maybe even change some of the values of that the the resistor in there just to see more or less treble bleed but Yeah Thank you

ways around the problem.

Yeah you're welcome one thing that will be interesting is is with the 50s wiring is really as as it comes in into its own when the tone's down if you're not used to playing with that tone down as a default starting point it's less of less use,

But just to say if you the obvious answer when we say

right? So if you want to use it and get the most out of it, are you, you know, you have to kind of go there and find your sound with the tone and volume down and tweak it for that, you know? We're so in, we're so used to having everything on 10 all the time,

oh I turn my volume down

you know? And this just opens all that up. It's amazing. Cool. I think we might get you to play us out, Simon, if that's all right. Um, we are about to do viewers' comments and questions, so we're about to do that. So yeah, thank you for visiting again.

Okay, it's down to nine or two.

Thanks so much for having me. Amazing. modding our guitar. Yeah. Well, your guitar had a bit of a crackle, so hopefully hopefully I didn't break your new guitar. I think I know what that is. I think I know what it is. Good. All right. Go to that Pedal Show store.

Yep.

Please subscribe. Thanks to the retailers. And extra special thank you to our patrons on Patreon. Thank you, guys. Thank you so much. Yeah, yeah. And without further ado, this is Simon Jarrett. Thank you. Oh, yeah. So we um You need the go thing again.

the chorus from the uh that Pedal Show comment section is fit a treble bleed.

Yeah.

Mm. Yep.

—

So, we're going to do that today.

—

But Dan and I normally reply we hate treble bleeds.

—

Yeah. It's that it's the thing where it's like when I hear Andy Timmons' clean

—

tone that into his Blues Driver which is cranked,

—

right?

—

Yeah.

—

And it's the most glorious clean tone.

—

Now, he he uses a treble bleed and it works for him.

—

I think with Mick and myself where we're using fuzzes

—

Exactly. Yeah.

—

that treble bleed turns into a an ice pick in the ear.

—

It just it it's really harsh.

—

And I think the way that we set up our gain stages we're on the volume a lot,

—

right? So, we will set up the gain stages so that it sounds good at 10 but also

—

sounds good at nine, you know?

—

So, we find that sort of middle ground,

—

the compromise where where we're quite flexible on the volume thing.

—

What we find is with the way that we use our gain stages that treble bleeds are

—

too I don't know.

—

There's too much uh it's it's too harsh.

—

There's a harshness to it that we with the way that we play and the pedals that we

—

use, it just doesn't seem to work.

—

Okay. So yeah, there's there's a few comments to make about the whole treble bleed

—

situation.

—

So probably a lot of guys who are first introduced to treble bleeds uh perhaps they

—

use a capacitor which is too big.

—

So uh basically you put a capacitor across lugs one and two of your volume pot

—

Yeah.

—

and this capacitor bypasses that series resistance I was just talking about.

—

So it's like a bright cap in the

—

It's like a bright cap in an amp, yeah.

—

It's across one pins one and two.

—

Um and uh if you use say a thousand picofarad cap

—

Mm.

—

uh what will happen is yeah, it'll get it'll keep brightness,

—

but as you continue to roll down, it'll get even brighter and you'll lose low end

—

and it'll be thin and harsh.

—

Yeah.

—

Okay? So well, couple of potential solutions.

—

One is to use a much smaller cap

—

Right.

—

uh and for example uh PRS I think use a 180 picofarad cap.

—

It's a lot smaller.

—

And I think you've probably got one in that in your DGT,

—

probably.

—

I have one guitar that has a treble bleed in it that I have never

—

wanted to take out.

—

Right.

—

There you go.

—

So

—

It's more subtle.

—

Yeah.

—

Yeah, yeah. So when you use a really small cap,

—

you're bypassing just the really high frequencies across that series resistance.

—

Yeah. So when you say bypassing, you're just to lay it out you're if you think of

—

your volume control, that dictates how much of the signal from this is going to the

—

output. Putting that cap across says okay,

—

I'm going to let this frequency through no matter what is going on with the volume

—

control, right?

—

it's an interactive process because it does matter where the volume control set

—

because as you change the volume setting,

—

that series R changes too, right?

—

Yes, okay.

—

any particular capacitor and resistor in parallel you know,

—

if you change the resistor, you change that relationship.

—

okay. Okay.

—

so for example,

—

if you use a small cap to bypass,

—

this is what happens, you know, you find a value cap and you say,

—

okay, I'm going to try that, and you turn it down to say eight or seven,

—

you go, oh, that's actually pretty good.

—

But if you continue turning down,

—

Yeah.

—

then

—

Okay.

—

the capacitor is bypassing a larger resistor,

—

and we hear that we hear more effect.

—

Okay?

—

So, it really depends on how much do you want to turn down.

—

Are you turning down with a clean sound?

—

Are you turning down with the dirty sounds?

—

You know, so all that is really important.

—

And we can change the value of that capacitor,

—

but it's always a compromise because it won't be a linear relationship.

—

It never is.

—

Okay?

—

Yep.

—

And there are ways around it by using series or parallel resistors to help,

—

but they're always a compromise.

—

But that's basically like the Andy Timmons setup,

—

I believe, if I've got it right.

—

It's like a 1,000 picofarad capacitor,

—

but it's in series with a 150k resistor.

—

Right.

—

And that series resistor limits the big effect that that 1,000 picofarad cap has.

—

Got it.

—

And we're going to do that in a minute,

—

aren't we?

—

We are. Yeah, we are.

—

So, practical examples then.

—

That's a lot of electronics stuff straight off the bat for those of you who may be

—

um uh get a bit lost with those explanations.

—

Let's talk about it in practical terms.

—

We're going to mod two guitars today,

—

so you're about to hear some sounds.

—

Simon's then going to rewire both guitars,

—

or at least modify the wiring in both guitars,

—

and we'll come back and we'll compare the sounds that we got.

—

Example number one, my new Cutler.

—

Yes.

—

Right.

—

So, I'll try and do this as briefly as I dare.

—

Um on experienced days,

—

when I do this with my my old Strat,

—

I'll explain to people that when I go straight into the

—

amp and play with the volume up full,

—

the sound, this guitar actually just exacerbate things is quite dark sounding once

—

we get up towards the neck pickup.

—

Right.

—

Volume up full, straight into the amps with no pedals because there's no buffers

—

anywhere here is as bright as I like it.

—

The second I turn it down it goes dull,

—

right? Check it out.

—

So you hear how you lose a huge amount of top end,

—

guitar straight into the amp for all the reasons Simon um explained in the

—

beginning.

—

Now the way I get around that is I'll use a clean boost which buffers the signal.

—

I won't bother with a clean boost.

—

I'll just turn a buffer on and listen to the difference this makes,

—

okay?

—

Solve number one, introduce a buffer.

—

At the start of the signal chain.

—

So what we're going to test in a second is if our treble bleed mod

—

Mhm.

—

matches that.

—

Okay?

—

Yep.

—

So I just need to write that down.

—

Um just before we get to the Les Paul and I'm going to try and keep the examples as

—

simple as possible.

—

Don't worry, Simon is going to play again before the end of the video.

—

But I'll try and keep the examples as simple as possible so you can really hear

—

what's going on.

—

If I now add an overdrive pedal the effect is slightly less because it's the

—

buffer from the overdrive pedal is there but it's still definitely darkens off a

—

little bit.

—

So um Simon's brought Minstrel version three in today.

—

Maybe we could dial that in as how we had it before.

—

I use the bridge pickup and I'll just do the a similar

—

thing.

—

Bit more subtle.

—

but but definitely still there.

—

Yeah.

—

Yeah, of course.

—

And is and is that that's because we're not hitting the input of the valve

—

pedal with with a buffer.

—

We're hitting the like there's a relationship now between the input of the pedal

—

Mhm.

—

and the guitar.

—

Absolutely, yeah.

—

Right, okay.

—

Yeah, the input of the pedal has an input impedance

—

Yep.

—

and there'll be a certain amount of capacitance at the input of the pedal to ground.

—

So there's something called Miller capacitance,

—

which is the effect that a valve has.

—

There's like capacitance in between the electrodes within the valve and that gets

—

amplified by the amplification factor of the valve.

—

So you might have like about 100 picofarad of capacitance right at the input of the

—

effect,

—

Oh, wow.

—

right?

—

Because of the particular valve you're using.

—

Yeah, like a 12AX7 typically you know when it's set up as a regular gain stage have

—

about 100 picofarad of capacitance to ground.

—

Okay.

—

you know that's going to form a low pass filter with that that series resistance,

—

right? And if you put a buffer um then that takes away the effect of that capacitor.

—

Right.

—

Okay. So it eliminates that.

—

It doesn't eliminate the effect of the first cable though cuz the buffer's after the

—

cable, right? But it does affect what the input of the amp or the pedal reacts to

—

your guitar.

—

Okay.

—

So why is it then that going into uh an overdrive

—

pedal like the minstrel the without a treble bleed

—

it goes darker, but with a fuzz when you roll it back it stays brighter.

—

Well, okay.

—

Um there's different fuzz designs,

—

but if we take say a classic uh like the classic fuzz face circuit,

—

which that isn't, um it has a very low input impedance,

—

very low, okay?

—

So right from the get-go it kills the resonant peak that we were talking about

—

immediately, okay?

—

But because it's high gain fuzz, it generates tons of high harmonics,

—

okay? Tons and tons of them, right?

—

Yes.

—

And if you put a buffer before a fuzz,

—

you know what you get, right?

—

It sounds incredibly harsh.

—

That's all those high harmonics untamed.

—

Okay.

—

But by killing the the resonant peak by having such a low input impedance,

—

you're basically EQing the signal at the beginning of the circuit.

—

Yes. Okay.

—

As opposed to, you know, in a lot of most overdrive circuits and amps,

—

there's EQing in in you know along the way,

—

especially at the end there'll be some kind of filtering device.

—

In the fuzz, the filtering's all at the beginning,

—

mostly, pretty much all at the beginning.

—

But as soon as you turn your volume down,

—

it's kind of interesting and this is a little bit complicated,

—

but when you turn the volume down uh the the pickup now sees that series

—

resistance

—

Mhm.

—

as being added to the input impedance of the device.

—

So your input impedance as far as the pickup sees it actually goes up.

—

Right.

—

So that allows uh some uh resonant peak to come back in,

—

okay?

—

And what that and what retains our top end.

—

and that brings back top end, especially as there is so much top end in the fuzz

—

circuit. You just don't know it because it's all tamed at the input.

—

Okay. Here we go.

—

Okay. Um before we start delving in with the soldering iron,

—

let's dial up some sounds on the Lester.

—

This is not nuanced, right?

—

Because it is it is

—

the telly and you play a bit.

—

It is currently wired fifties.

—

And the mod that Simon's going to do to this uh guitar is to allow us to compare

—

fifties and modern wiring,

—

modern.

—

And it's also going to allow us to compare a treble bleed and no treble bleed.

—

That's the plan, you know?

—

The one tone pot will be replaced with a push-pull pot,

—

which will activate the treble

—

Mhm.

—

And the that treble bleed will affect both pickups.

—

And then the other push-pull pot will uh toggle between modern and fifties wiring,

—

so you could listen to either or both.

—

Yeah.

—

Amazing.

—

Right.

—

Dan?

—

Yes, mate.

—

Um we just need to come up with some sounds.

—

Well, let's let's start with the the straight clean tone from the neck.

—

So this is the neck on

—

full.

—

The most notable thing for me is that thud

—

Yep.

—

on the start of the note when you when the guitar's turned down.

—

Okay.

—

Mhm.

—

You have a very specific problem with neck humbuckers,

—

don't you?

—

I do.

—

And which is

—

But it's just so bloated.

—

Yeah.

—

It's so bloated.

—

It's like a six beers and a curry on a Friday night after a long week and then you

—

regret being alive.

—

So shall we introduce some overdrive and see how we can get on with that then,

—

Dan?

—

yep. I'm going to the minstrel.

—

And the TS into the minstrel sounded pretty good earlier.

—

Let's go let's cuz you use more gain than I use.

—

All right.

—

Is that what you had earlier, Simon?

—

did the Rogue into minstrel but I did the Rogue into the TS actually sounded really

—

good too. But yeah do any combination.

—

with it.

—

There we go. All right, so neck pickup

—

again.

—

Am I hearing that changing resonant peak then?

—

Cuz it definitely went from thick and fat and full to more fluty for want of a

—

better description.

—

Yeah. Yeah, absolutely.

—

One one thing we should mention though is that Dan's guitar is

—

currently 50s wired.

—

Okay?

—

So I guess we'll hear it modern wired after after we get

—

back.

—

But yeah it's I mean it still sounds good but it does have that it's still got kind

—

of a tubby low end,

—

Yeah.

—

right?

—

The the issue that I've

—

got, right?

—

Is that if I play that same sound on the bridge pickup,

—

Yeah.

—

it would just rock like no one else's business,

—

and it's tight. Okay?

—

So,

—

you.

—

But now I want to go to the

—

neck.

—

Well, it's that thing where it sounds Bridge pickup sounds great down here,

—

but to make this usable, I don't go near this until I'm up to C sharp up here.

—

That's a different problem though,

—

that's

—

But there's But there's It's that low end thing that down here if I if I play power

—

chords on the G because I And again,

—

I hit quite hard, and it has that thing.

—

It's like if I set up the sound so it sounds rocking on the bridge pickup,

—

as soon as I go to the neck pickup down lower,

—

it's just It's unusable for me.

—

So,

—

Can we scoop out more?

—

Okay. Let's get wiring then, and um we'll explore some of these sounds in more

—

detail, and it'll make more sense when we come back because the direct comparison's

—

going to be there.

—

So uh Yeah, yeah, yeah.

—

Let's do that.

—

Here we are then, as promised, Simon in situ in the common room,

—

complete with guitar cavity,

—

soldering apparatus,

—

and

—

new fandangled bits of electronic gadgetry.

—

You can explain to us what you've done with that in a second,

—

but you've already fitted the treble bleed?

—

Yeah, I got the treble bleeds ready in place just to make the process a touch

—

quicker. It's not quite finished, but yeah.

—

And that's the combination resistor and capacitor?

—

Yeah, this is a resistor and a capacitor,

—

and uh the the resistor can be varied,

—

so we can hear the effect of different resistances,

—

if you like.

—

We will, of course we like.

—

Look at that. Killer.

—

All right. We're going to leave Simon to it.

—

Um I'll probably just leave the overhead camera on.

—

Um but yeah.

—

Uh Interesting.

—

Okay. Back in a moment.

—

Super.

—

We're at that heart-in-mouth moment,

—

Simon, where you've done a load of wiring to the guitar,

—

and we're testing it.

—

That's right.

—

Have you got it Have you got it right first time?

—

Well, let's see.

—

I mean, this is stock with the pots down.

—

And you hear it gets darker.

—

So this is the treble bleed, so if it

—

works There it is,

—

right?

—

Let's check on the uh neck pickup.

—

So This is the '50s Modern.

—

This will be interesting.

—

Now to to hear the difference, we need to roll down Oh yeah.

—

Get out of town.

—

There you go. One thing you notice with the '50s is it drops a lot more volume.

—

Yeah, yeah, yeah, yeah.

—

Right? But that's part of the deal.

—

Okay. On to guitar two, Simon.

—

Mhm. Uh it would make most sense to change this pot

—

Yeah.

—

and make this the push-pull pot.

—

Great. The middle one.

—

Yeah, because it's closer to the volume,

—

right? So that way the components can just go straight across.

—

Yeah. It's always slightly slightly scary showing your wiring to someone like

—

you, Simon.

—

No, not at all. Well, just don't look in the back of Dan's guitar,

—

okay?

—

Um

—

Simon is soldering all day, every day.

—

Uh pretty much.

—

I uh except that I do have two workers,

—

so I have to check over all their work.

—

So I I make usually one pedal a day.

—

Those guys make two, but then I have to take care of them and the rest of the

—

business,

—

right?

—

As Dan gently learns the Hotel California guitar solo,

—

Simon is coming to the end of Please Don't Sue Us Don Don

—

Henley. Simon's come to the end of the wiring on on the Cutler and you have some

—

information to impart.

—

This trim pot here

—

Yeah.

—

is set to be right now it's a 300K trim pot.

—

Right.

—

I've set it to 150K.

—

Okay.

—

When you if you open this and you want to change it you need to measure the

—

resistance between these two lugs.

—

The only lugs that are being used.

—

I've chopped the other lug off.

—

Okay.

—

And then if you turn clockwise the resistance goes up and anticlockwise the

—

resistance goes down.

—

So that's about it.

—

And we can discuss the effect of that when we go and plug in in a minute.

—

Yeah. So amazing.

—

So I now have a push pull treble pot

—

Yeah.

—

and we'll explain this in the other room,

—

but I decided that it made sense for the the treble bleed to be active with the

—

knob in the down position.

—

Yes.

—

So in its standard position

—

That's right.

—

which is a bit of a risk for me.

—

Amazing. Do you think we should test it before we put the screws back in?

—

Sure. We could put just one or two in and

—

Back in the room.

—

Well well

—

as the little bit of cutting will tell both guitars have been modified.

—

So prosaically let's just go through the sounds that we had,

—

okay, before and then we can do some more interesting stuff after

—

that.

—

So Simon has modded the Cutler so that the treble bleed,

—

which is what I asked him could be in the down position

—

That right.

—

the standard position will be the treble bleed sound.

—

Yeah.

—

So which means as it was the pot will be pulled up

—

That's right.

—

Right.

—

And we'll see if my sound Cutler no pedals neck pickup 10 and nine.

—

Okay. I think I played in B.

—

But, who knows?

—

I know I played.

—

It's clearly having an effect on the neck pickup.

—

The next one was the Minstrel.

—

And I tried uh the neck pickup to start with,

—

if you remember.

—

So,

—

So that's carving out Feels like it's carving out some lower mids as well.

—

Would that

—

I mean, this particular combination of resistor and cap,

—

as I say, as you turn down the volume,

—

it's going to constantly Whatever you put in there,

—

it's going to constantly be having a different effect from like nine,

—

eight, seven, six.

—

So we'll go on the bridge pickup.

—

go lower down and see what it does.

—

Oh yeah, sure. the bridge, yeah.

—

Just work on the bridge pickup.

—

No treble bleed.

—

So there's two things that has changed in Daniel's guitar.

—

One is he's gone from 50s wiring.

—

Well, you've got the option of 50s or modern wiring.

—

Mhm.

—

Diagram on screen.

—

And the second is you've got the treble bleed or not.

—

So

—

Yes.

—

What shall we hear first?

—

I want to hear the 50s.

—

50s wiring. So the 50s wiring is

—

Well, I think it was this one.

—

The 50s wiring is that one.

—

I'm pretty sure.

—

So with it down, it's modern, and with it up is 50s.

—

That's correct.

—

Right. Okay. So

—

modern first and

—

All right. So

—

And it will only have any effect if the volume is turned down a bit.

—

If the volume and tone are both on 10,

—

there's no difference cuz the wiper and and pin one are shorted.

—

So there's no difference.

—

Right. Okay.

—

So it maybe play it full out, come back to eight,

—

which is where you were.

—

Okay.

—

And then engage the 50s wiring.

—

Okay.

—

So

—

Did you put it back?

—

I I know I've just I've just want make sure there's no

—

difference.

—

So 50s or modern wiring doesn't matter when up full.

—

As long as the volume and the tone are both up full,

—

Yep.

—

then it's In fact, as long as the volume's up full,

—

it makes no difference.

—

Okay.

—

Subtle difference now.

—

Yeah, yeah.

—

But I can I can I just want to mention something.

—

Yep.

—

Right now your tone's on at max, right?

—

Yeah. It comes into its own when the tone pot is rolled back to

—

On in 50s wiring.

—

Oh, okay.

—

you don't wire the tone pot back, it's a subtle difference,

—

right?

—

Okay.

—

So you have to have the tone pot low and then lower the volume and then go between

—

50s and modern and see the

—

difference.

—

So now

—

That's amazing.

—

Keep those exact settings.

—

Going to pile loads of gain on.

—

Yeah. Okay.

—

Yeah. Cuz what we did is we

—

had

—

That's just that's not even a treble bleed.

—

That's just 50s wiring.

—

That's amazing.

—

And now do the thing that you never ever ever do.

—

Put the volume on

—

three.

—

Can I mention one thing about that?

—

Mhm.

—

We were hearing a big difference between modern and fifties wiring,

—

but then Mick you reached over and you turned on the Rogue.

—

Now what the fuzz does though is it does its own thing.

—

Yeah.

—

So I don't think that with the fuzz you need to go to fifties wiring.

—

Okay.

—

Right? You can keep it in modern wiring and fuzz works great.

—

Yeah, okay.

—

It cleans up already.

—

You can do both if you want.

—

Right.

—

But it's more the point when you're not using fuzz I think.

—

the reason I did it was to put on so much gain

—

Yeah.

—

That then actually down to two on the guitar,

—

which might have confused matters a little bit,

—

but down to two on the guitar is a totally usable sound for four-pot Gibson which

—

you'd never go

—

Never.

—

anywhere near. Like I could see you like turning the volume down like you were

—

scared to go past seven.

—

Yeah.

—

It's like no no no.

—

just would die.

—

Keep going but it doesn't die.

—

No, that's amazing.

—

And that's just fifties wiring.

—

Okay. So now the treble bleed, now the treble bleed,

—

right?

—

So if we keep it on modern for now

—

Yeah, keep it on modern.

—

All right. So I'm going to turn the treble bleed on.

—

Again with the the time pot all the way up it'll make no

—

differ Now on a dial

—

Sorry Simon, you were going to say?

—

Well, no I I mean nothing really.

—

Just maybe just hear it with some gain.

—

Yeah, yeah.

—

That's what I was going to do.

—

So stick it in

—

Modern?

—

modern again.

—

Yeah.

—

And now um going to put lots of gain on and just see how much usable

—

clean that gives you with lots of gain.

—

ALL RIGHT.

—

LITERALLY unlocked sounds I've never had before in this guitar.

—

Now put the 50s wiring in as well with that same sound.

—

Okay.

—

Just for context, just go all out on the bridge pickup a minute,

—

can you?

—

Yeah.

—

Uh was the TS9 on?

—

Yes.

—

Yeah, it was.

—

One one thing I'd mention is that because of all those sounds you were playing with

—

were with both the TS9 and the Minstrel.

—

The TS9, of course, it lops off a whole lot of bottom end at the beginning,

—

right? And so that combined with your treble bleed or your 50s wiring,

—

you know, maybe that's too much, you know?

—

So it's it's all, you know, and you need to take the time to dial it in on the

—

guitar. Like where do you set that tone pot?

—

For 50s wiring there's a huge range.

—

I love this. I'm leaving this I mean this is this guitar now.

—

This is how this guitar looks now.

—

versatile.

—

It's so cool.

—

Yeah.

—

Are you Simon Dan, do you want to try anything else?

—

My questions have been answered.

—

I'm good to go. I would just want to hear Simon play.

—

Yeah, and and just to finish us off,

—

we've got Minstrel version 3 on the board which we haven't seen before and the Rogue

—

Valve Valve Fuzz which you've heard a little bit through the

—

video.

—

You could maybe play a bit, Simon,

—

and show us some sounds in them.

—

How does that feel?

—

With the with the new a newly modded

—

Yeah.

—

with with 50s wiring and a push-pull and treble boost on the push-pull.

—

treble There you go.

—

Here we go sound.

—

you Well, 50s wiring we knew about,

—

but hearing it side to side is nuts.

—

It's nuts. I had no idea that it would make that much difference.

—

You know, I wanted to say something about the 50s one.

—

You noticed Did you notice when you went when we rolled the volume and the tone back

—

and you went between the two, one of the side effects of 50s wiring is

—

that when you roll the tone down it acts more like a volume control.

—

Yeah.

—

So it actually takes the volume So some people don't like it for that because it's

—

like you rolled back the tone and your volume gets lower.

—

So perhaps for clean tones it's not as useful for some people because of that.

—

Yeah, but the but there was top the top end regained.

—

It It was like an almost like an acoustic guitar.

—

It was amazing.

—

But but what he is about to say

—

When you add gain, what happens?

—

You're compressing the signal and those weaker signals are louder anyway.

—

okay.

—

So 50 So if you're playing into a gainy amp,

—

50s wiring really makes

—

Right.

—

Because the gain is compensating for the fact that that the taper has changed,

—

right?

—

Yeah. So, you're essentially way putting headroom back into your amp because

—

you're pulling out a bunch of that low-mid frequency or you're you're actually

—

reducing the volume.

—

Yeah.

—

And that is your amp which is really squashing and overdriving heavily squashes

—

less.

—

And actually the difference in volume would be much less noticeable.

—

Yeah.

—

Which is why all our favorite players or all our favorite Gibson players of a

—

certain period had the '50s wiring,

—

right?

—

Yeah, especially the old school guys who plugged straight in the amp or had a simple

—

setup, you know?

—

It's cool for that.

—

Yeah.

—

It is fascinating.

—

yeah.

—

There we go.

—

Um

—

Tone adventure.

—

Amazing.

—

I need a cable.

—

You need the uh driving device on.

—

cable gosh.

—

Maybe you could show us some sounds in here that you particularly like.

—

Okay.

—

I mean, is that too much reverb for you?

—

Uh not for me, but if it sounds amazing

—

I mean, I didn't tweak anything, but that sounded pretty decent right there really.

—

Uh just very briefly, the mode switch,

—

if you put it down, it's a lower gain mode and it's a little bit leaner and a little

—

bit smoother on the top

—

end.

—

And with the uh with the mid control,

—

you know, you can get It's got quite powerful mids if you want to get

—

thick.

—

More more gain, more girth, a bit more

—

edge.

—

So it's kind of a mid gain, quite rocky,

—

yeah, yeah. And uh this is what I would call the Minstrel version three

—

B. I've added a new mode here.

—

If we up the gain a bit, this actually will get quite aggressive because it puts a

—

big bright cap across the gain pot.

—

So so it's still

—

got some girth, but it's got this attack on the top end,

—

right?

—

Um that is amazing.

—

So that's uh yeah, that's the Minstrel.

—

It's a very popular pedal for us, but I know that you guys never really have spent a

—

lot of time with it, so I'll just leave it with you guys to see what you think.

—

I can see that getting a bit of use.

—

Oh yeah.

—

Yeah, wow. And you've got it there's a new V three page coming out,

—

is that right?

—

That's right. There's a V three page.

—

I'll just grab it.

—

It is out. Yeah, people have got this already.

—

So it's just like the V two,

—

Yep.

—

except it adds uh a lows pot in place of the lows mini toggle.

—

Okay.

—

Ah, okay.

—

And so it's constantly variable, which just means you can fine tune the low end

—

content.

—

Yeah, because if you don't like the if you if you want between,

—

you now have between.

—

Yeah, yeah, yeah.

—

Plus like some of our other pedals,

—

like the uh peasant and the artisan,

—

this also doubles as an input impedance control.

—

Okay.

—

So lowering it not only gives you less low end,

—

it also takes you more into mid range territory because you get this the lowering of

—

the impedance again takes down the resonant peak.

—

Yes, okay.

—

off some top end as well.

—

So that's this and there's a new third mode which gives you a smidge more

—

gain.

—

Might need

—

a second just to uh

—

Yeah. Yeah, it's got to warm up.

—

a little bit.

—

Yeah.

—

That's the same that's mode two.

—

It's just an an edge, you know, a little bit of edge just to get to that edge of

—

breakup point that you might get from turning up an amp a bit,

—

you know.

—

beautiful.

—

past the edge of breakup.

—

Okay.

—

I mean those tones honestly are in Page version two very much,

—

right?

—

Yeah.

—

Um except for just being able to nail dial that really nicely in.

—

And then the new mode adds a little bit just a smidge extra gain,

—

not a lot. It's not capable of much,

—

but sometimes guys have pages and they go,

—

you know what, is there a pedal you have that does that but just a little bit more?

—

Yeah, yeah.

—

So this gives you that little

—

more and introduces a bit more

—

mid-range.

—

Um, yeah.

—

That's so good.

—

Big boy sounds today.

—

So that's

—

Yeah, that's the page version three.

—

Um,

—

boy sounds today.

—

And uh I finally, you know, after all this 50s and and and all that and treble

—

bleed, everything's just Everything's Everything's just so right now,

—

you know.

—

Yeah, yeah. It sounds amazing.

—

Can I just hear the Rogue quickly with with the old Stratoblaster?

—

Yes.

—

Explain to me, Simon, the voice thing again.

—

Sure. Well, first of all, if you would play with your volume full up,

—

I'll show you what it does through the range.

—

And then we'll try again with your volume down because it's really mostly about fine

—

tuning the cleaned up sound.

—

Okay.

—

But it also has an effect on the full up sound,

—

but less so.

—

So one thing I should mention is as you noticed when you clean up with a guitar like

—

the Strat with a fuzz pedal, it can get kind of spiky,

—

you know, the cleanup can be too much mid scoop and too much upper shimmery

—

stuff that gets a little harsh.

—

It's yeah,

—

So here you can kind of dial that out a bit by going that way.

—

yeah.

—

Um maybe before you stop there, Mick,

—

what we should also do is do that again,

—

but do it going into something that's just a little bit driven already.

—

Right.

—

'Cause that will take some of that edginess off it as well,

—

right? So if we set this up, um that's this one,

—

isn't it?

—

Mhm.

—

So if you let's just set that

—

up

—

So depending on how much cleanup you want with the gain set and the kind of guitar

—

like with this guitar when you roll down it just won't be as shimmery in that

—

cleanup right yeah

—

to have that to have control of that because that's what we want right with our

—

that's why I did it with the strap was because

—

Yeah

—

I want when I step on my fuzz for it to go shimmery like we like we love so to have

—

control over it is is cool man

—

Yeah yeah

—

Good okay we covered a lot of ground today um I

—

guess the coming weeks and months will be interesting to see how much we use

—

our treble bleed um and maybe even change some of the values of that

—

the the resistor in there just to see more or less treble bleed but

—

Yeah

—

Thank you

—

Yeah you're welcome one thing that will be interesting is is with the 50s wiring is

—

really as as it comes in into its own when the tone's down if you're not used to

—

playing with that tone down as a default starting point it's less of less use,

—

right? So if you want to use it and get the most out of it,

—

are you, you know, you have to kind of go there and find your sound with the tone

—

and volume down and tweak it for that,

—

you know?

—

We're so in, we're so used to having everything on 10 all the time,

—

you know? And this just opens all that up.

—

It's amazing.

—

Cool. I think we might get you to play us out,

—

Simon, if that's all right.

—

Um, we are about to do viewers' comments and questions,

—

so we're about to do that.

—

So yeah, thank you for visiting again.

—

Thanks so much for having me.

—

Amazing.

—

modding our guitar.

—

Yeah. Well, your guitar had a bit of a crackle,

—

so hopefully hopefully I didn't break your new guitar.

—

I think I know what that is.

—

I think I know what it is.

—

Good. All right.

—

Go to that Pedal Show store.

—

Please subscribe.

—

Thanks to the retailers.

—

And extra special thank you to our patrons on Patreon.

—

Thank you, guys.

—

Thank you so much.

—

Yeah, yeah.

—

And without further ado, this is Simon Jarrett.

—

Thank you.

—

Oh, yeah.

—

So we um

—

You need the go thing

—

again.

—

Yeah.

—

Machine translation (synapse:auto)Report translation error

More in this topic