
These days the world of guitar looks very,
Delete Everything On Your Modeler
2 October 2026 · Source: Rhett Shull (YouTube)
Are amp modelers actually making you a worse guitar player? When you have thousands of amps, cabs, and pedals at your fingertips, it’s dangerously easy to spend hours tweaking and zero hours actually playing. Today, we are tackling the biggest problem in the modern guitar world: option paralysis. I’m breaking down my 4-step method for getting out of the digital rut, building a rig from scratch, and forcing yourself to actually commit to a tone. If you're stuck in a preset-scrolling loop on your
Video transcriptauto-generated captions · EN · RU
Click a timecode to jump to that moment in the video
These days the world of guitar looks very,
В наши дни мир гитары выглядит очень, Это сильно отличалось от того, что было 15 или 20 лет назад, когда я начинала с детства. В то время у меня был один усилитель, Несколько педалей, и все. Итак, когда я изучал новые стили или пытался подражать определенному игроку,
very different than it did 15 or 20 years ago when I was starting out as a young
Я действительно должен был понять, что происходит с оборудованием, которое у меня было, и понять. Ограничения, то, что я мог и не мог делать с тем, к чему у меня был доступ. И если бы я собирался купить новый кусок снаряжения,
guitar player. Back then, I had one amp,
Я действительно потратил время, чтобы понять и исследовать и выяснить, что мне нужно, потому что у меня было В то время денег практически не было. И я не хотел тратить те маленькие деньги, которые у меня были на кусок снаряжения. Я буду работать для меня.
a handful of pedals, and that was it.
Но в наши дни, с появлением плагинов и моделей усилителей, Это не проблема для современного гитариста. Ваши возможности практически безграничны. И в некотором смысле это хорошо, Но в других отношениях, я думаю, что это плохо.
So, when I was learning new styles or trying to emulate a certain player,
И я думаю, что это проблема, которую имеют все моделисты и все плагины усилителя. Слишком много вариантов. И особенно для молодых гитаристов или новых гитаристов, которые начинают Эти современные инструменты, я думаю, могут работать против них.
I really had to understand what was going on with the gear that I had and understand
Итак, в сегодняшнем видео я постараюсь помочь вам пройти через это. Если вы чувствуете, что у вас есть паралич выбора, если вы действительно не понимаете, как получить звук от вашего модельера или вашего плагин, который вы ищете, я думаю, что это видео поможет вам.
the limitations, what I could and couldn't do with what I had access to.
Шаг первый, удалите все. Погоди, прежде чем ты это сделаешь, Сначала убедитесь, что у вас есть резервная копия всех ваших вещей. Это то, что мне время от времени приходится делать с моими образцами. Мои коробки паза, потому что я тяготею к одним и тем же звукам снова и снова
And if I was going to buy a new piece of gear,
снова. Через некоторое время я перестаю исследовать и искать новые вещи. Я впадаю в колею. И всякий раз, когда я замечаю, что это начинает происходить, Я просто очищаю жесткий диск, удаляю все. То же самое касается и модельеров.
I really took time to understand and research and figure out what I needed cuz I had
Если вы используете один и тот же тип звуков, пресетов или педалей или захватов и Опять же, и вы устали от звука, который вы получаете, Начните свежий, чистый лист. Одна из замечательных вещей в моделях сегодня заключается в том, что вы всегда можете вернуться.
basically no money at the time.
Если вы решите, что у вас ничего не получится, Вернитесь и переустановите свои любимые звуки и уйдите оттуда. Но, по моему опыту, есть что-то ценное в том, чтобы иметь чистый лист, просто свежий лист бумаги для работы, пустая сетка на вашем плагине или модельере,
And I didn't want to waste what little money I had on a piece of gear that wasn't
И это то, что мы собираемся построить в следующих шагах. Шаг второй - построить свою собственную буровую установку с нуля. Не загружайте предустановку исполнителя или предустановленную пользователем.
going to work out for me.
Начните с совершенно свежего, чистого листа и постройте буровую установку с нуля. Есть много разных способов сделать это. Один из моих любимых способов - попробовать подражать любимому артисту.
But nowadays, with the advent of amp plugins and modelers,
Около года назад, когда я был нанят в качестве гастролирующего гитариста для The Midnight, Я решил, что пришло время начать копаться во многих гитарах 80-х. Ты думаешь, что Ландау, Люкатер, Дэн Хафф, Тим Пирс. Это было своего рода слепое пятно для меня как гитариста,
that's not a problem for today's guitar player.
И я сделал это с моим Quad Cortex. В интернете так много информации, Например, о том, какое снаряжение использовали эти ребята и как они его использовали. какой приказ. Что бы вы ни делали, Какому бы игроку вы ни пытались подражать,
Your options are effectively limitless.
исследовать их буровую установку и попытаться воспроизвести ее как можно ближе с вашим модельером выбор. Это сделает несколько очень важных вещей для вас. Во-первых, это научит вас некоторым основам потока сигналов.
And in some ways, that's a good thing,
Например, как порядок педали, где ваши педали идут в цепочке против вашего усилителя По сравнению с любыми почтовыми эффектами, которые могут произойти. Во-вторых, это перевернет вас на различные стили эффектов или разных кусочков Снаряжение, о котором вы можете не знать.
but in other ways, I actually think it's a bad thing.
Для меня в какой-то момент это было очень круто, Узнав о событии H3000, Знаменитый стеллаж, который использовался на бесчисленных записях в 80-х и 90-х годах. Я знал звук, который я хотел услышать. Но я не знал, какую часть снаряжения использовали эти ребята.
And I think this is a problem that all modelers and all amp plugins have.
Итак, проведя некоторое исследование, я узнал о H3000. и я узнал о конкретных пресетах, которые Люкатер, Ландау, Дэн Хафф использовали свои H3000 в студии. и затем я смог повторить это в Quad Cortex или в моем Axe FX,
There's too many options.
или в моей Helix. Это огромное, если вы хотите узнать больше о звуковом дизайне и Создавайте свой тон. Это не просто понимание того, какой тип овердрайва или фузза мог быть Использовали, но что еще происходило. Выберите конкретную песню, соло или часть, которую вы любите,
And especially for younger guitar players or newer guitar players who are starting
и возьмите эту цифровую версию своей установки, которую вы построили, И постарайтесь совместить его. А, это очень весело, я думаю: Если ты ботаник, как и я, Но Б, это сделает тебя намного лучше гитариста. Ты поймешь тон и звучание намного лучше. Шаг третий: изучите основы.
out, these modern tools, I think can actually work against them.
Я говорю о скучных вещах, которые многие гитаристы склонны пропускать. Это такие вещи, как EQ, сжатие, получить постановку, микрофоны и размещение микрофонов на акустических шкафах. Дело в том, что с модельерами или плагинами они не обязательно эмулируют звук
So, in today's video, I'm going to try and help guide you through some of this
Усилитель в комнате, сидящий рядом с вами. Они эмулируют звуки усилителя или целой установки, как это было бы. Запись в студии или на сцене. Если ваш модельер или плагин дает вам доступ к педали EQ или блокам EQ, Используйте их и экспериментируйте с ними.
stuff. If you feel like you have option paralysis,
Узнайте, что делает EQ перед усилителем и после усилителя. То же самое и с компрессией. Возьмите компрессорный эффект или блокируйте и поместите его в разные точки вашего сигнала цепочку и посмотреть, как изменяется ощущение и звук вашего тона перед приводами,
if you don't really understand how to get the sound out of your modeler or your
после приводов, или в самом конце вашей сигнальной цепи после всего усилителя и Акустические кабинеты и эффекты имели место. И последнее, но не менее важное: узнайте о постановке выигрыша. Если вы не знакомы, gain stage - это идея контроля уровней.
plugin that you're looking for, I think this video will help you out.
контроль громкости в разных точках вашей сигнальной цепи. Если вы думаете об этом, когда ваш сигнал гитары проходит через вашу установку, У вас есть несколько педалей, у вас есть усилитель, У вас может быть несколько пост-эффектов,
Step one, delete everything.
Каждый из этих элементов может влиять на общий объем, Получение вашего сигнала. И поэтому важно понять, как правильно поставить эти вещи. или как поставить их таким образом, чтобы дать вам звук или тон, который вы могли бы быть Шаг четвертый - это фиксация.
Now, hold on. Before you actually go and do that,
Это, пожалуй, самая трудная часть, По крайней мере, для меня, когда дело доходит до использования любого модельера или плагина. Когда у вас есть доступ к множеству различных инструментов и звуков, усилителей и педалей и
make sure you have a backup of all your stuff first.
колонки и микрофоны, всегда есть это чувство в задней части головы, когда Вы создаете звук или играете модельера типа: «А что, если я попробую это сделать? Что, если бы я попробовал эту другую ИК?» И до того, как ты это узнаешь, ты через три-четыре часа.
This is something that I have to do from time to time with my samplers,
Ты едва играл на гитаре, ты потратил все время на настройку звуков. Это одна из вещей, которые мне нравятся в традиционных аналоговых буровых установках. Если хотите, и почему я до сих пор предпочитаю использовать их вживую, Это их ограничение.
my groove boxes, because I find myself gravitating to the same sounds over and over
Независимо от того, насколько большим или сложным может быть буровая установка, Там всегда будет какое-то ограничение, которое может не присутствовать. С вашим Квад Кортексом, Кемпером или спиралью. Так что, на мой взгляд, это важно. Практикуйте это обязательство.
again. After a while, I stop exploring and looking for new things.
Закройте браузер на своем плагине, Держитесь подальше от предустановленного меню на вашем Quad Cortex, Старайтесь не переключаться между различными пресетами, которые часто и только один звук. И если вы хотите изменить его, если вы ищете что-то новое,
I sort of fall into a rut.
Сделай вид, что это как настоящая аналоговая установка, Настоящий усилитель, настоящая педальная доска, настоящие микрофоны. Гораздо легче сказать, чем сделать. Я могу сказать вам по опыту, что я становлюсь жертвой этой бесконечной настройки.
And whenever I notice that starting to happen,
То, что происходит, но это то, над чем нужно работать. Вот так. Это мои советы, чтобы получить максимальную отдачу от вашего модельера или плагина и сделки с самой большой проблемой из них, которая заключается в бесконечном параличе.
I just clear out the hard drive, delete everything.
Если вы нашли это видео полезным, дайте мне знать, оставив лайк и комментарий вниз ниже. Это помогает алгоритму выйти. Кроме того, подпишитесь на канал внизу, если вы еще этого не сделали. Я на гастролях с "Полночью" осенью. Проверьте ссылки.
The same thing goes for modelers.
Даты тура ниже, в зависимости от того, когда вы увидите это видео, Может быть, я иду по дороге в город рядом с тобой. Так что да, я бы хотел увидеть тебя там. Вы можете купить билеты по этой ссылке и посмотреть, где мы играем. Меня зовут Ретт Шулл.
If you are using the same sort of sounds and presets or pedals or captures over and
Большое спасибо за просмотр и очень скоро поймаю вас на следующем видео.
over again, and you're sort of tired of the sound that you're getting,
—
start fresh, clean slate.
—
One of the great things about modelers today is you can always just go back.
—
If you decide this doesn't work out for you,
—
go back and reinstall your favorite sounds and go from there.
—
But, in my experience, there's something so valuable about having a clean slate,
—
just a fresh sheet of paper to work with,
—
an empty grid on your plug-in or your modeler,
—
and that's what we're going to build off in the following steps.
—
Step two is to build your own rig from scratch.
—
Do not load up an artist preset or a user preset.
—
Start with a completely fresh, clean slate and build a rig from scratch.
—
Now, there's many different ways to go about doing this.
—
One of my favorite ways is to try and emulate a favorite artist.
—
About a year ago, when I got hired as the touring guitar player for The Midnight,
—
I decided it was time to really start digging into a lot of those '80s LA guitar
—
sounds. You think Landau, Lukather,
—
Dan Huff, Tim Pierce.
—
That was sort of a blind spot for me as a guitar player,
—
and so I did it with my Quad Cortex.
—
There is so much information online on on YouTube,
—
for example, about what gear these guys were using and how they were using it and in
—
what order. Whatever you're going after,
—
whatever player you might be trying to emulate,
—
research their rig and try and replicate it as close as you can with your modeler of
—
choice. This will do a few very important things for you.
—
One, it'll teach you some fundamentals about signal flow,
—
for example, like pedal order, where your pedals go in the chain versus your amp
—
versus any kind of post effects that may be happening.
—
Two, this will turn you on to different styles of effects or different pieces of
—
gear that you may not know about.
—
For me, this was huge cuz at some point,
—
learning about the Eventide H3000,
—
a famous rack unit that was used on countless records back in the '80s and the '90s.
—
I knew the sound that I was going for,
—
but I didn't know what piece of gear these guys were using.
—
So, after doing some research, I learned about the H3000,
—
and I learned about the specific presets that Lukather,
—
Landau, Dan Huff were all using with their H3000s in the studio,
—
and then I was able to replicate that in the Quad Cortex or in my Axe FX,
—
or in my Helix. This is huge if you want to learn more about sound design and
—
crafting your tone.
—
It's not just understanding like what type of overdrive or fuzz might have been
—
used, but what else was going on.
—
Pick a specific song, or solo, or part that you love,
—
and take this digital version of their rig that you've built,
—
and try and match it.
—
A, this is immensely fun, I think,
—
if you're a nerd for this stuff like I am,
—
but B, it's going to make you a much better guitar player.
—
You're going to understand tone and sound much better.
—
Step three, learn the fundamentals.
—
I'm talking about the boring stuff that a lot of guitar players tend to skip over.
—
These are things like EQ, compression,
—
gain staging, microphones and mic placement on speaker cabinets.
—
The thing with modelers or plugins is they're not necessarily emulating the sound of
—
the amplifier in your room sitting next to you.
—
They're emulating the sounds of an amplifier or an entire rig as they would be
—
recorded in a studio or on a stage.
—
If your modeler or plugin gives you access to EQ pedals or EQ blocks,
—
use them and experiment with them.
—
Learn about what an EQ does before an amplifier and after an amplifier.
—
Same thing with compression.
—
Take a compressor effect or block and put it at different points in your signal
—
chain and see how the feel and the sound of your tone changes before drives,
—
after drives, or at the very end of your signal chain after all of the amp and
—
speaker cabinets and effects have happened.
—
And last but certainly not least, learn about gain staging.
—
If you're not familiar, gain staging is the idea of controlling the levels,
—
controlling the volume at different points in your signal chain.
—
If you think about it, as your guitar signal travels through your rig,
—
you've got a few pedals, you've got an amplifier,
—
you maybe have a few post effects,
—
every single one of those pieces of gear can have an effect on the overall volume,
—
the gain of your signal.
—
And so, it's important to understand how to stage those things properly,
—
or how to stage them in a way that gives you the sound or the tone that you might be
—
looking for. Step four is commit.
—
This is arguably the hardest part,
—
at least for me, when it comes to using any kind of modeler or plug-in.
—
When you have access to so many different tools and sounds and amps and pedals and
—
speakers and microphones, there's always this feeling in the back of your head when
—
you're building a sound or playing your modeler of like,
—
"Ah, what if I tried this though?
—
What if I tried this other IR?"
—
And and before you know it, you're three or four hours in,
—
you've barely played guitar, you've spent the entire time tweaking the sounds.
—
This is one of the things that I love about traditional sort of analog rigs,
—
if you will, and why I still prefer to use them live,
—
is the limitation of them.
—
No matter how big or complicated of rig may get,
—
there's always going to be some kind of limitation there that might not be present
—
with your Quad Cortex or your Kemper or your Helix.
—
So, it's important, in my opinion,
—
to practice that commitment.
—
Close the browser on your plug-in,
—
stay out of the preset menu on your Quad Cortex,
—
try not to switch between different presets that often,
—
and and just commit to one sound.
—
And if you want to change it, if you're looking for something new,
—
pretend that it's like an actual real analog rig,
—
a real amp, a real pedal board, real microphones.
—
This is much easier said than done.
—
I can tell you from experience that I fall victim to this never-ending tweaking
—
thing that happens, but it's it's something to work on.
—
So, there you go.
—
Those are my tips for getting the most out of your modeler or plug-in and dealing
—
with the biggest problem of them, which is that never-ending option paralysis.
—
If you found this video helpful, let me know by leaving a like and a comment down
—
below. It helps the algorithm out.
—
Also, subscribe to the channel down there if you haven't done so already.
—
I'm on tour with The Midnight in the fall.
—
Check out the links.
—
Tour dates are down below, depending on when you see this video,
—
I may actually be out on the road coming to a city near you.
—
So, uh yeah, I would love to see you there.
—
You can get tickets via that link and uh see where we are playing.
—
My name is Rhett Shull.
—
Thank you so much for watching and I will catch you very soon on the next video.
—
More in this topic
Gear & luthierySharp Dressed Guitars! Gibson Custom 1959 & USA Billy Gibbons Pearly GatesAndertons Music Co (YouTube)
Gear & luthieryThe inside story of Josh Homme’s brand new signature guitarGuitar.com
Gear & luthieryHer Original Composition on a Rare Steel-String 😍🎸SiccasGuitars (YouTube)
Gear & luthieryGibson Billy Gibbons Pearly Gates Les Pauls: $20k Murphy Lab & USA StandardGibson has announced two Billy Gibbons Pearly Gates Les Pauls. A high-end $20k version and a Standard USA model The post Gibson Billy Gibbons Pearly Gates Les Pauls: $20k Murphy Lab & USA Standard appeared first on gearnews.com .gearnews.com