
Chords in SATB style
25 July 2024 · Source: Open Music Theory (Pressbooks)
Key Takeaways When constructing a chord in , there are six rules to keep in mind: Music theorists sometimes simplify compositions into four parts (or ) in order to make their harmonic content more readily accessible. This practice is called , abbreviated after the four common voice parts of a choir–– (S), (A), (T), and Read more »
Key Takeaways
When constructing a chord in SATB style, there are six rules to keep in mind:
Stem direction
Chord construction
Range
Spacing
Voice crossing
Doubling
Music theorists sometimes simplify compositions into four parts (or voices) in order to make their harmonic content more readily accessible. This practice is called SATB style, abbreviated after the four common voice parts of a choir––soprano (S), alto (A), tenor (T), and bass (B).
When constructing a chord in strict SATB style, there are six rules musicians generally follow:
Stem direction
Chord construction
Range
Spacing
Voice crossing
Doubling
These six parameters form the basis of counterpoint and part writing, explored further in the sections Counterpoint and Galant Schemas and Diatonic Harmony, Tonicization, and Modulation.
Stem Direction
Example 1. A stemming error. On a grand staff in SATB style, the soprano and alto are written in the treble clef (upper staff), while the tenor and bass are written in the bass clef (lower staff). The soprano and tenor voices receive up-stems, while the alto and bass parts receive down-stems. If the stem direction is crossed, this is an error. Example 1 shows a chord with incorrect stemming, followed by the corrected version.
Chord Construction
Example 2. A chord construction error. Be sure to check each chord for correct notes and accidentals, and make sure that your chords are not missing any notes. In Example 2, the first chord has accidentals erroneously added to two of the pitches, which are removed in the second chord to create a correct B diminished triad in first inversion.
The bass voice must always correspond with the inversion that the Roman numeral’s figures indicate. However, the order of the upper notes can be arranged in many ways. In other words, there is not necessarily just one correct way to voice a chord.
Range
Example 3. Vocal ranges. There is a generally accepted range for each voice (Example 3):
Soprano – C4 to G5
Alto – G3 to D5
Tenor – C3 to G4
Bass – F2 to D4
Example 4. A range error. In Example 4, the soprano and bass notes are out of range; this is corrected by moving the soprano note down by an octave and the bass note up by an octave.
Spacing
Example 15. A spacing error. There should be no more than an octave between adjacent upper voices (soprano and alto, alto and tenor) and no more than a twelfth between the tenor and bass. The most common spacing error occurs between the alto and tenor because the notes appear in different clefs. Example 15 first shows a chord with incorrect spacing—the soprano and alto are more than an octave apart, as are the alto and tenor—followed by a corrected version:
Voice Crossing
Example 6. A voice crossing error. The ranges of voices should not cross. In other words, the soprano must always be higher than the alto, the alto must always be higher than the tenor, and the tenor must always be higher than the bass. In Example 6, the alto and tenor voices are crossed. This error is also the most common between the alto and tenor voices.
Doubling
Example 7. A doubling error. In a triad, the note in the bass is usually doubled in an upper voice. However, there is an exception to this: the leading tone is never doubled. Other tendency tones, such as chordal sevenths, are also never doubled. Seventh chords don’t have any notes doubled because they contain four notes, one for each voice part. Incorrect doubling is seen in the first measure of Example 7, where the leading tone is doubled, followed by a corrected voicing in the second measure.
Assignments
Coming soon!
Media Attributions
Stemming © Megan Lavengood is licensed under a CC BY-NC-SA (Attribution NonCommercial ShareAlike) license Wrong-notes © Megan Lavengood is licensed under a CC BY-NC-SA (Attribution NonCommercial ShareAlike) license Range © Megan Lavengood is licensed under a CC BY-NC-SA (Attribution NonCommercial ShareAlike) license Too-high © Megan Lavengood is licensed under a CC BY-NC-SA (Attribution NonCommercial ShareAlike) license Spacing © Megan Lavengood is licensed under a CC BY-NC-SA (Attribution NonCommercial ShareAlike) license Voice-crossing © Megan Lavengood is licensed under a CC BY-NC-SA (Attribution NonCommercial ShareAlike) license Doubled_lt © Megan Lavengood is licensed under a CC BY-NC-SA (Attribution NonCommercial ShareAlike) license
definitionA musical texture with soprano (S), alto (A), tenor (T), and bass (B) parts.
×Close definition On a grand staff in SATB style, the soprano and tenor are up-stemmed, while the alto and bass are down-stemmed.
×Close definition The pitch content of a chord.
×Close definition The span of notes a voice or instrument can produce.
×Close definition The intervals between voices. For chords in strict SATB style, there should be no more than an octave between upper voices (soprano and alto, alto and tenor), and no more than a twelfth between the tenor and bass.
×Close definition When a higher voice part moves below a lower voice part. In strict SATB style, the ranges of voices should not cross; the soprano must always be higher than the alto, the alto must always be higher than the tenor, and the tenor must be higher than the bass.
×Close definition Duplicating some notes of a chord in multiple parts.
×Close definition An independent, monophonic part within a piece of music (instrumental or vocal). Each voice may be played by a different instrument, or multiple voices may be played by one instrument (especially in polyphonic instruments like keyboard or guitar).
×Close definition The highest part in SATB style, written in the treble clef staff with an up-stem; its generally accepted range is C₄–G₅.
×Close definition The second-highest voice part in SATB style, written in the treble clef staff with a down-stem; its generally accepted range is G₃–D₅.
×Close definition The second lowest part in SATB style, written in the bass clef staff with up-stems; its generally accepted range is C₃–G₄.
×Close definition The lowest voice in SATB style, written in the bass clef staff with a down-stem; its generally accepted range is F₂–D₄.
×Close definition The act of mirroring pitch content vertically, so that motion down becomes up and up becomes down. Inversion often preserves intervallic content.
×Close definition Arabic numerals and symbols that indicate intervals above a bass note. These are realized into chords and non-chord tones by musicians.
×Close definition Scale degree 7 that is one half step below the tonic. The leading tone is diatonic in major keys, but requires an accidental in minor keys.
×Close definition Refers to the seventh above the root of a chord. For example, V⁷ in the key of C is spelled G-B-D-F; F is the chordal seventh.
×Close definition
More in this topic
Theory & harmonyTone King Introduces Royce Preamp PedalPremier Guitar
Theory & harmony5 extended chords that add depth and harmonic richness to your playingGuitar World
Theory & harmonyDADGAD for Beginners: Make Simple Guitar Chords Sound Amazing | TrueFireTrueFire (YouTube)
Theory & harmonyThe Only 2 Chords You Need to Know to Play Like SantanaSantana’s version of Oye Como Va is built on a simple two-chord vamp, and the voicings make all the difference. For the G minor 7, think of a G minor barre chord, lift the pinky off, and add it on the 6th fret B string. Then move to a C7 using the A7 shape, barring the third fret with the 5th fret D and B on top. Those two chords are a perfect example of G Dorian, which you can think of as G minor pentatonic with one extra note on the 5th fret of the E string. That one added note is what gives tMarty Music (YouTube)